Print

[zyo]

dont know whats got onto my

click sammy unlock before reading the firmware off
now all the bins will just say 00000000000000000000 as key

Am I fucked?

[Takashi]

You could begin by filling us in on A LOT MORE INFO.
lol
 (IMG:style_emoticons/default/blink.gif)

[zyo]

ok
I hooked the sammy(not modified) with via 6421
boot into windows 7 32bit
open jungleflasher and clicked sammy unlock

the unlock process went fine. all stages pass.

Then I click read. generates ofw.bin or something but the keys are all 0s

I realised something wrong so I put the drive back into the xbox360 and you know what? original game wont play anymore

looks like I am screwd. does sammy unlock erases key now?

This post has been edited by zyo: Sep 4 2009, 10:24 AM

[zyo]

anyone help?

[run187]

it wont work in your xbox beacuse it still in vendor mode ,sam unlock will not wipe the key you have to click earse yourself
try reading the key again as the 000 one is obv bad
drive should say in vendor mode with status x70 DONT click write or earse untill you have a valid key
load your sam ofw file into jf see what key it gives you prefibly in the new jf and sending a outro command would make it work in xbox again unless you earsed it without getting key and by clicking sam unlock ALONE
that would be impossible ..

[zyo]

sorry I should be more clear.
I am using a xtractor with this sammy.
shouldnt the sammy return back from vendor mode if I unplug it from xtracotr and put back into the xbox?

if so shouldnt it work?

I tried again in dos using dosflash still not valid key.
I have restarted the computer with the drive

[hetster]

you could also use dos to try and get the key..VIA chipset is known to have issues with windows flashing apps. but VIA comes into its own when using dos. it can break through samsungs firmguard with the 10 second bad flash technique..you wont have to worry about unlocking and vendor modes that way..

[run187]

no you have to click outro for it to go back to previous state
dosflash32 (xbins) or dos should get you the key just dont wipe it yet or it will be fubar..

give one of your onboard sata ports a try see if that gives you a key before dos ..

This post has been edited by run187: Sep 4 2009, 11:40 AM

[zyo]

tried with dosflash as well
bin contains no valid key, same result as from jungleflasher

I havent tested the console before modding though maybe it came with a zeroed samsung?

can I send any of you guys my firmware dump from jungleflasher and see if there is actually no key?

[Ranger72]

QUOTE(zyo @ Sep 4 2009, 06:47 AM)

I havent tested the console before modding though maybe it came with a zeroed samsung?

Biggest mistake people make. Always test to see if the console and drive works before you even take it apart.

Sounds like someone screwed the drive up before you got your hands on it.

[run187]

seems like you have a pre owned console if it was from game or game station i would take back
i have had a console from there with butchered warranty sticker that i took back because of the condition of it
cola stains on psu ect
you can send me it if want ill check if no one else has
[email protected]

[federicozose]

i can hel you, just send mi the Original.BIN file you get with jungleflasher or dos flash and i get the correct key for you ( i use an hex editor to find the key lost in the .BIN), mi mail is [email protected], i alreadi save almost 10 samsums from the same situation, federico

[federicozose]

QUOTE(zyo @ Sep 4 2009, 11:47 AM)

tried with dosflash as well
bin contains no valid key, same result as from jungleflasher

I havent tested the console before modding though maybe it came with a zeroed samsung?

can I send any of you guys my firmware dump from jungleflasher and see if there is actually no key?

i can hel you, just send mi the OFW.BIN file you get with jungleflasher and get the correct key for you ( i use an hex editor to find the key lost in the .BIN), mi mail is [email protected], i alreadi save almost 10 samsums from the same situation, federico

[zyo]

thanks guys.

decided to take it back to the guy and get a new one.
I usually dump sammy in dos this is the first time I use jungleflasher for a stock sammy.

Its a 06 model with original heatsink and everything no hdmi, the guy claimed it reads games no problem.

[OggyUK]

Email me the fw to oggy at jungleflasher . net

Ill get the key

Of course, if you havent already actually taken it back.

I like how you accidentally done it, then accidentally accepted the warning.

(IMG:style_emoticons/default/wink.gif)

QUOTE(hetster @ Sep 4 2009, 11:34 AM)

you could also use dos to try and get the key..VIA chipset is known to have issues with windows flashing apps. but VIA comes into its own when using dos. it can break through samsungs firmguard with the 10 second bad flash technique..you wont have to worry about unlocking and vendor modes that way..

then use firmtool? the firmware has a "valid" key, 16 bytes of 0x00 -> Firmtool will give the exact same key.

This post has been edited by OggyUK: Sep 4 2009, 08:49 PM