Topic: Considering New Smarrtxx Chip... (Read 145 times)

Affini · « **on:** January 29, 2006, 08:37:00 AM »

I've only used X3 chips before but I'm considering a SmartXX LT OPX SE

Does this allow ED@Chip to be run?

I mostly want it for fast HDD clone.

I'm going to use XBMC as my dash so I will not need most features of any mod chip. Only HTTP/FTP flashing for updates, and a on-chip FTP in case XBMC does not boot.

Also, I cannot find a place that sells this chip, only the previous OPX version.

thanks in advance!

JustinT9669 · « **Reply #1 on:** January 29, 2006, 10:34:00 AM »

you only can run ED@chip from RAM on a SmartXX LT OPX SE. (you will have to run remote flasher on your pc to load ED@chip)

This post has been edited by JustinT9669: Jan 29 2006, 06:34 PM

Affini · « **Reply #2 on:** January 29, 2006, 10:55:00 AM »

QUOTE(JustinT9669 @ Jan 29 2006, 10:34 AM)

you only can run ED@chip from RAM on a SmartXX LT OPX SE. (you will have to run remote flasher on your pc to load ED@chip)

Sorry for being new to SmartXX...

does remote flasher work over the LAN or does it require a cable connection to the the SmartXX board?

gamerayers · « **Reply #3 on:** January 29, 2006, 02:18:00 PM »

You can do 1:1 clones of hard drives with smartxx chips, you can run an ftp on the chip with smartxx chips, and you can flash it either in a web-browser, using the remote flash program, or ftping a bios then flashing it on the board. Very user friendly.

Affini · « **Reply #4 on:** January 29, 2006, 05:31:00 PM »

Even the older OPX V1 chips?

I cannot find the newest version on the SmartXX site... so I may need to buy the older one.

As for 1:1 ... can I do a 250 -->> 300 or does it need to be 250 -->> 250?

This post has been edited by Affini: Jan 30 2006, 01:31 AM

Affini · « **Reply #5 on:** January 29, 2006, 08:21:00 PM »

I found the SE version, only at Divineo.

I don't need any fancy LCD or such so will the OPX SE do what I need on v1.0 xbox?

I'm going to use XBMC as my dash exclusively.

DT778 · « **Reply #6 on:** January 31, 2006, 11:37:00 PM »

www.bmmods.com has them.
direct link to chip

I ordered from the before and I'm about to order one of these right now.

Affini · « **Reply #7 on:** February 01, 2006, 05:49:00 AM »

they are out of stock.

Divineo seems to have them too.

gamerayers · « **Reply #8 on:** February 01, 2006, 09:34:00 AM »

I do not believe you need the new chip to do a 1:1 clone, as for can u do a 250-300, I am not sure. I have never played with it, but it is built into the smartxx OS so it is on all their chips.

DT778 · « **Reply #9 on:** February 06, 2006, 09:07:00 PM »

QUOTE(Affini @ Feb 1 2006, 04:49 AM)

they are out of stock.

Divineo seems to have them too.

I must have ordered the last one.

Modiller · « **Reply #10 on:** February 07, 2006, 08:49:00 PM »

I wouldn't recomend doing an HD clone with 250-300gbs worth. I remember when using the hd clone feature in the Xeniums OS, and for C:\ along it took longer then expected.

Author Topic: Considering New Smarrtxx Chip... (Read 145 times)