Print

[AnnaOlum]

Recently I was given a (old) Xbox 1.0 for free. I decided to extend it with an VGA port.

What do I have to do to get my VGA port to work?
I soldered the port directly to the motherboard after JaredC01's diagram/guide.

I only get a signal with my old CRT monitor (another CRT doesn't even work) and even then only when it boots.
Also the screen is too green (and too dark) - the Microsoft logo isn't white but green.
(Btw: I don't have a HD cable)

Greetings,
Anna

Edit: Already checked the cables - they're all in their right places and isolated from one another.

This post has been edited by AnnaOlum: Jan 29 2012, 02:59 PM

[Heimdall]

You need a VGA BIOS or a softmod that supports VGA, or you could use FrostyTheSnowman and Xman954's VGA Boot Disc

For Kingroach NDURE 3.1 you run NDTS (E:\ndts\default.xbe) and select Nkpatcher Settings then one of the RGB options. HOWEVER, there's a small bug in the ndts config (E:\ndts\config.xml), so you should replace it with this version first.

Edit. It's too long, so I can't paste it here. Just don't select RGB67 as the nkpatcher option. I'll find somewhere to host the modified config. Meanwhile, here's the bit of config.xml you need to change - it's the section from NKPatcher Settings down to the start of the "System" part of the menu - just cut and paste into your current ndts config.xml

CODE

        
        
        
        
            
            
            
            
            

            
            
            
            
            

            
            
            
            
            

            
            
            
            
            

            
            
            
            
            
            
            
            
            
            
            

            
            
            
            
            
            
            
            
            
            
            
            
        

        

This post has been edited by Heimdall: Jan 29 2012, 03:39 PM

[AnnaOlum]

What's with the "&nbs" at the bottom of your config file? It seems like it's not complete...

Edit: Ah, ok. THX!!!!!

This post has been edited by AnnaOlum: Jan 29 2012, 03:46 PM

[Heimdall]

Here's the whole config file. (IMG:style_emoticons/default/smile.gif)

Edit: Replaced with link to the text version.

This post has been edited by Heimdall: Jan 29 2012, 04:51 PM

[AnnaOlum]

Can't download the file. It says something about "XML error: not well-formed"...

[Heimdall]

Try this text version. You'll need to rename it once you've downloaded it.

[AnnaOlum]

Thanks!

One more thing...
If i used the nkpatcher RGB .06 should the VGA work then? Or do I still have to change the BIOS? If so, how do I accomplish this?

[Heimdall]

That's three things....... (IMG:style_emoticons/default/sleep.gif)

Yes.
No.
Flash the BIOS, or fit a chip, or use PBL to load a BFM VGA BIOS every time you boot.

This post has been edited by Heimdall: Jan 29 2012, 05:01 PM

[AnnaOlum]

Now I'm confused...  (IMG:style_emoticons/default/sad.gif)

I have used the nkpatcher RGB .06 now but the boot screen is still green tinted. When XBMC loads after the boot screen I still got no image.

[AnnaOlum]

Anyone who can guide me through the VGA process?

Already did the first point - installing ndure 3.1.

This post has been edited by AnnaOlum: Jan 30 2012, 12:19 AM

[xboxmods2977]

I consider myself pretty knowledgeable in the art of Xbox VGA, but I don't do softmods. Flash your TSOP, and then we'll talk.

[AnnaOlum]

Help please?

Btw: I don't do hardmods except the VGA port. Is it possible to flash the TSOP with a VGA bios without physical tools (e.g. soldering iron, etc.)?

This post has been edited by AnnaOlum: Jan 30 2012, 04:59 PM

[Heimdall]

Temporarily, try Frosty and xman945's VGA boot disc. This will confirm the basic operation of your VGA output. Burn it to DVD-R, and don't forget to put the config file on your hard drive (as per the instructions).

I'll have another think about the softmod solution later.

[Movax]

QUOTE(AnnaOlum @ Jan 30 2012, 10:09 AM)

Is it possible to flash the TSOP with a VGA bios without physical tools (e.g. soldering iron, etc.)?

Conductive pen or paint. (rear window defogger repair kit).

[AnnaOlum]

@Heimdall It seems like the DVD drive is defective so i can't use boot discs.

@Movax Thanks, I red a bit about this topic and I think I can handle this myself with a soldering iron. (IMG:style_emoticons/default/biggrin.gif)
Is it neccessary to have the games "James Bond 007: Agent under Fire" or "Mech Assault" or can I do the TSOP flashing via a softmodded (ndure 3.1) box?

By the way: Is a TSOP flash comparable to a modchip? Can I run unsigned stuff with it?

This post has been edited by AnnaOlum: Jan 30 2012, 07:35 PM