xboxscene.org forums

Author Topic: 2 Xbox Pal + Component Cable Doesn't Work  (Read 62 times)

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« on: March 04, 2008, 05:04:00 AM »
Good Morning to all guys!!!!

sorry for my bad english


I've 2 Xbox:

1. Xbox + Akira 2se + microsoft hd pack
2. Xbox + Xchanger 2.5 + HD mod (schema avip)

all the xboxs are started with ind bios.

I cannot find the hd resolution (like720p) for select them
(IMG:http://images.xbox360-tribe.org/tuts/81/thumbs/Dash_NTSC.jpg)

I start the original dashboard,
settings
and i find only 4:3, 16:9, and letterbox.

where i can find the settings of this image???

(IMG:http://images.xbox360-tribe.org/tuts/81/thumbs/Dash_NTSC.jpg)


In my opinion I've an old original dash because I cannot find this settings anywere
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #1 on: March 06, 2008, 01:14:00 AM »
any suggestion?
Logged

majin_lyndon

  • Archived User
  • Newbie
  • *
  • Posts: 5
2 Xbox Pal + Component Cable Doesn't Work
« Reply #2 on: March 06, 2008, 07:52:00 AM »
As far as I know you can't use the original dash to enable HD.

Once you've changed your Pal Xbox to NTSC with the Enigmah Video Switch you can enable 720p etc. with something like Xbox Media Centre. I use XBMC as my dash, you should too!
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #3 on: March 06, 2008, 09:15:00 AM »
QUOTE(majin_lyndon @ Mar 6 2008, 04:28 PM) *

As far as I know you can't use the original dash to enable HD.

Once you've changed your Pal Xbox to NTSC with the Enigmah Video Switch you can enable 720p etc. with something like Xbox Media Centre. I use XBMC as my dash, you should too!


my problem is in the original m$ dash...when I enter in the video section i find only

4:3
16:9
letterbox

but i cannot select
480p
720p
1080i

where is this selection...how I can find the screenshot posted upside?
Logged

majin_lyndon

  • Archived User
  • Newbie
  • *
  • Posts: 5
2 Xbox Pal + Component Cable Doesn't Work
« Reply #4 on: March 06, 2008, 10:43:00 AM »
That is right,you cannot select HD settings in M$ Dash.

You'll need another dash like XBMC.
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #5 on: March 07, 2008, 03:06:00 AM »
QUOTE(majin_lyndon @ Mar 6 2008, 07:19 PM) *

That is right,you cannot select HD settings in M$ Dash.

You'll need another dash like XBMC.



(IMG:http://images.xbox360-tribe.org/tuts/81/thumbs/Dash_NTSC.jpg)


but this screenshot is one of the original dash, and I cannot found it.

or for see xbmc in 720p I've only to put on the xbox the microsoft the original HD pack and change the resolution in XBMC?

sorry for my bad manners to explain the problem...but in all the tutorial the step to see the HD resolution on a PAL xbox are:

- install a modchip.
- play enigmah software & switch on the ntsc mode.
- restart original dash (microsoft) and go to the video settings
- now in the video settings are enabled
480p
720p
1080p


I cannot find the last step ... (IMG:style_emoticons/default/grr.gif)  (IMG:style_emoticons/default/uhh.gif)  (IMG:style_emoticons/default/uhh.gif)
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #6 on: March 13, 2008, 02:08:00 AM »
Can anyone help me?

http://it.youtube.com/watch?v=hSmT5jmV2AI

this is the video of one my xbox.

The hd resolutiond doesn't work....

may the tv lcd does not support the xbox hd????

This post has been edited by spn: Mar 13 2008, 09:10 AM
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #7 on: March 28, 2008, 03:03:00 AM »
QUOTE(spn @ Mar 13 2008, 09:44 AM) *

Can anyone help me?

http://it.youtube.com/watch?v=hSmT5jmV2AI

this is the video of one my xbox.

The hd resolutiond doesn't work....

may the tv lcd does not support the xbox hd????


anyone have any idea?  (IMG:style_emoticons/default/uhh.gif)  (IMG:style_emoticons/default/uhh.gif)  (IMG:style_emoticons/default/uhh.gif)
Logged

funy

  • Archived User
  • Newbie
  • *
  • Posts: 19
2 Xbox Pal + Component Cable Doesn't Work
« Reply #8 on: March 30, 2008, 01:58:00 AM »
run enigmah first to double check you are deffo in ntsc.

then go into xbox video settings, choose widescreen and then you should get the hd res options below.

if its not there then your normal xbox dash must be some odd version.
Logged

spn

  • Archived User
  • Newbie
  • *
  • Posts: 8
2 Xbox Pal + Component Cable Doesn't Work
« Reply #9 on: March 31, 2008, 08:01:00 AM »
QUOTE(funy @ Mar 30 2008, 09:34 AM) *

run enigmah first to double check you are deffo in ntsc.

then go into xbox video settings, choose widescreen and then you should get the hd res options below.

if its not there then your normal xbox dash must be some odd version.



how I can refresh my microsoft dashboard without a LAN connection (for the live!)?

(you can explain where I can find it on a PM? thanks you) (IMG:style_emoticons/default/ph34r.gif)
Logged

funy

  • Archived User
  • Newbie
  • *
  • Posts: 19
2 Xbox Pal + Component Cable Doesn't Work
« Reply #10 on: March 31, 2008, 11:45:00 AM »
if you can find slayers auto installer , sorry cant link it it has the files on there and a restore ms dash option to use when youve installed a new hdd. not sure if this is any good, sorry been years since i last used it.
Logged