Ok, so you used the Xodus LPC Rebuild diagram, and then you had to connect LFRAME on your xbox to T2 on the chip to make it work. I have soldered my LPC rebuild after the X-bit diagram.
You'll see that there is a cable from LFRAME to LPC3 so I dont think I should connect another cable on LFRAME to T2.
Also, without this LFRAME connection your xbox would only load the original bios? My box does not load the original bios, instead it boots 3 times, last time it flashes red and green. If I turn off the modchip via the DIP-switch on the chip it boots the original bios, so it seem like the chip is working, just dont load the bios.
I'm totaly cluless of what to try next, not sure if its a hardware problem (missing wire or something) or bad bios.
Im using the M8_16.BIN bios as im told to do so.
I have a crystal xbox v1.6 with an x-bit v1.5 modchip + the 1.6 adapter.
This post has been edited by Nickokick: Dec 6 2004, 08:10 PM