How to network to your xbox without any ftp software.
Using dashboard EvolutionX +3921 and Windows 2000 Pro Service Pack 4
(It may work on other dash boards and operating systems but I wouldn't know)
Step 1: Hook a crossover cable up from your pc network card to your xbox.
Step 2: Turn on xbox.
Step 3: Go to System Utils, then Settings
Step 4: Put in these settings:
Under Network:
Setup Network = Yes
Use Static IP = Yes
IP = 192.168.000.002
Subnetmask = 255.255.255.0
Default Gateway = 192.168.000.001
DNS = 0.0.0.0
DNS = 0.0.0.0
Setup Delay = 0
Skip Setup If No Link = No
Under FTP:
Enable = Yes
Password = xbox
Step 5: Make sure you go to "Save and Exit"
Step 6: Reset your xbox
Step 7: Turn on PC
Step 8: Click Start, Settings, Network and dialup connetions
Step 9: Right Click "Local Area Connection" and click Properties
Step 10: Select "Internet Protocol (TCP/IP)" and click Properties
Step 11: Select "Use the following IP address:
Step 12: Put in these settings:
IP = 192.168.000.001
Subnetmask = 255.255.255.0
Default Gateway = 192.168.000.001
Step 13: Click Ok and click Ok again
Step 14: Double click "My Network Places"
Step 15: Double click "Add network Place"
Step 16: Type in ftp:// followed by your xbox's IP address like this "ftp://192.168.0.2"
Step 17: Click next uncheck "Log on anonymously", type in "xbox" for "user name" then click next
Step 18: Type in any name ( I used "xbox") click finish
Step 19: You should see your xbox files. If a pop up asks for a password type in "xbox"