Topic: Winbond Xbox 1.4 Bery Big Problem, Help. (Read 260 times)

robert0006 · « **on:** May 21, 2011, 02:21:00 PM »

I did the following (disk orginal and softmod , used XBMC) :
I copy Gentoox.ShALLaX.Loader-v6.07 in Xbmc to E:\apps , and x2_4977.67_EC.bin to C:\bios, next I make jumper in board. (like this )
(IMG:http://img43.imageshack.us/img43/5288/cieki.th.jpg)

Uploaded with ImageShack.us

Next turn off Xbox and give Gentoox.ShALLaX.Loader-v6.07 , later advanced -> flash menu -> hdd flash and choose x2_4977.67_EC.bin and flash console (green bar is 100).

Consol automatic, turn off and turn on but http://www.youtube.com/watch?v=Ar9uK7NnnSI

How to fix it, Is she died ?

Heimdall · « **Reply #1 on:** May 21, 2011, 02:50:00 PM »

You've flashed a bad BIOS, and you now need to fit a chip.

When you fit a chip, flash a newer BIOS - X2.5035, or iND-BIOS.5003, or X2.4981, or Evox M8+.

robert0006 · « **Reply #2 on:** May 21, 2011, 03:06:00 PM »

"You've flashed a bad BIOS, and you now need to fit a chip." How should I do it ?

This post has been edited by robert0006: May 21 2011, 10:06 PM

lordvader129 · « **Reply #3 on:** May 22, 2011, 09:51:00 AM »

QUOTE(robert0006 @ May 21 2011, 02:06 PM)

"You've flashed a bad BIOS, and you now need to fit a chip." How should I do it ?

buy a modchip and install it using a guide for whatever modchip you end up buying

duoX2 is probably the cheapest one available these days

robert0006 · « **Reply #4 on:** May 23, 2011, 01:12:00 AM »

Unsure ? , because I give chip Alladin xt + 2 and xbox doesn`t work.

ldotsfan · « **Reply #5 on:** May 23, 2011, 06:14:00 AM »

QUOTE(robert0006 @ May 23 2011, 03:12 PM)

xbox doesn`t work.

You have to provide more details. We are not mind readers

robert0006 · « **Reply #6 on:** May 23, 2011, 07:42:00 AM »

I don`t know what I have to write more. I was installed Alladin XT+2 and again http://www.youtube.com/watch?v=Ar9uK7NnnSI

ldotsfan · « **Reply #7 on:** May 23, 2011, 08:06:00 AM »

To begin with, what bios did you flash to the Aladdin?

robert0006 · « **Reply #8 on:** May 23, 2011, 09:28:00 AM »

Bios to Aladdin is original.

steveo1978 · « **Reply #9 on:** May 23, 2011, 12:12:00 PM »

QUOTE(robert0006 @ May 23 2011, 11:28 AM)

Bios to Aladdin is original.

Make sure you have the chip installed correctly, and that you are actually booting off the chip. Ground the d0 point and that will fore the xbox to boot from the chip if the chip is installed right. If the xbox still does not boot then the chip is probably installed wrong

lordvader129 · « **Reply #10 on:** May 24, 2011, 02:35:00 PM »

QUOTE(robert0006 @ May 23 2011, 08:28 AM)

Bios to Aladdin is original.

most of the aladdins i've bought came with evox d.6 on them, its possible the bios on your aladdin is too old to support the 1.4

robert0006 · « **Reply #11 on:** June 03, 2011, 08:36:00 AM »

I gave Aladdin XT of auto boot ,and all working , how to do it now TSOP in board Xbox ?

steveo1978 · « **Reply #12 on:** June 03, 2011, 11:14:00 AM »

The tsop in the xbox is messed up now you will have to leave the chip in.

Author Topic: Winbond Xbox 1.4 Bery Big Problem, Help. (Read 260 times)