n3 reboots frag are not caused by the d0. It is either a problem with the alignment on the LPC, or the OS is corrupt. DO NOT try reversing the chip on backwards, unless you want a nice Xenium Ice pendant.
If realigning the adapter does not help, put the chip in recovery mode with the switch(if you don't know what that is then you haven't read everything yet, read the Iceguide from teamxodus.com downloads section, and the OS recovery guide) and see if the recovery screen comes up. If it does burn a recovery disc and power up with the dics in the dvd and the switch in recovery, or if you already have the recovery.bin on E:\ let it run. If you do not see the recovery screen then check the install again.