xboxscene.org forums

Author Topic: Somebody Help Me B4 My Head Explodes  (Read 390 times)

kronyck

  • Archived User
  • Newbie
  • *
  • Posts: 1
Somebody Help Me B4 My Head Explodes
« on: December 18, 2006, 04:15:00 PM »
Surely someone can at least attempt to look at my problem... blink.gif
Logged

Hairous

  • Archived User
  • Newbie
  • *
  • Posts: 1
Somebody Help Me B4 My Head Explodes
« Reply #1 on: January 09, 2007, 04:53:00 AM »
I have this exact problem at the moment although i haven't checked the voltages.

when i first put the pin header in pin 7 wasn't soldered correctly and the modchip would only boot up with evoX
single press on turned on off 3 times then frag - no video
press on 2 seconds booted up evox ok
press 5 seconds (for flash chip) fragged.

When i 'fixed' the soldering for the header evox no longer started and frag.

removing the chip causes the xbox to frag (D0 ok)
remove D0 from ground, xbox boots as factory.

I have tryed the alt points but no change.

I think i will desolder the pin header and try it again.
Logged

MDM9KZD

  • Archived User
  • Newbie
  • *
  • Posts: 3
Somebody Help Me B4 My Head Explodes
« Reply #2 on: February 26, 2007, 06:31:00 PM »
Did u put your x-chip at right orientation? Try both oriatation.
And make sure when you boot in MS dashboard, the time and date are current.
Logged

RiPpN-N-TrIppN

  • Archived User
  • Full Member
  • *
  • Posts: 200
Somebody Help Me B4 My Head Explodes
« Reply #3 on: February 26, 2007, 06:54:00 PM »
sounds like the chip's bios might be rooted
can u take it off and reflash the chip externally
if the box is bootin with the chip turned off and doesnt boot with the chip on
thats a good sign that the bios on the chip might be corrupt
Rip
Logged