Topic: 411 X-chip Mod On 1.6xbox For Experts (Read 186 times)

christineyoung · « **on:** February 27, 2005, 07:25:00 PM »

Is all the pin header soldered? I've read many post where only the 4 wires are aolders onto pin header and thats it. All pn son pin header mush be soldered.

When you have xchip installed, did you have a 1.6 compatibel biso on it! This is a must!

nooner · « **Reply #1 on:** February 28, 2005, 12:19:00 AM »

I am looking at the packing box that came with the XBOX. It says 120v - 60hz 1.8A
I understand the first two. What is 1.8A? That couldn't be a NEW version of XBOX. Could it? From everything I see from my XBOX(Xcaliber & power connector), it looks like 1.6. Anyone?

Easybuy2000 · « **Reply #2 on:** February 28, 2005, 03:29:00 PM »

You can follow the X-Chip Master Install Guide for the X-Lite except on for version 1.6.

The Only difference is that both dips on (X-LITE) switch #1 (small switch) have to be moved to the OFF position BEFORE you install in Xbox.

Also in the master insatll guide it says to solder the D0/LFRAME of the Xbox wire to the D0/LFRAME of the X-Chip. For the X-LITE you solder this wire to the LFRAME (1.6) marking of the X-Lite instead of the D0 point of the X-Lite.

Got it....

All other versions from 1.0 to 1.5 for the pin header install is exactly like the X-Chip as its for the X-Lite.

nooner · « **Reply #3 on:** February 28, 2005, 05:51:00 PM »

Thanks Easybuy2000. I will give it a try and let you know. Thanks again.

nooner · « **Reply #4 on:** February 28, 2005, 09:08:00 PM »

Hi EasyBuy2000,

I am a little new to the X-chip. So is there a separate x-chip Master guide for the X-lite and X-chip? Or it's the same guide? I follow the link from X-lite and found the x-chip Master Install Guide but it's the same one I have been using. Thanks.

surfboy_1 · « **Reply #5 on:** February 28, 2005, 10:03:00 PM »

nooner · « **Reply #6 on:** February 28, 2005, 10:15:00 PM »

Surfboy,
I suspect may be a problem with flashing too. I am going to use another computer to flash the x-chip and see what happens. I tried another x-chip and it did the exact same thing. Is there a 1.6 bios just for the 1.6XBOX? I thought someone said something about use the 1.6 BIOS.

surfboy_1 · « **Reply #7 on:** March 01, 2005, 05:39:00 AM »

PaulY^ · « **Reply #8 on:** March 01, 2005, 08:08:00 AM »

QUOTE(surfboy_1 @ Mar 1 2005, 12:45 PM)

The file name you should be using is "xchip_v1.3-1.6box_only.bin" you can not use the Standard xchip_v1.3.bin on a Version 1.6 Xbox

nooner · « **Reply #9 on:** March 01, 2005, 10:49:00 PM »

Ok, problem solved. I had to remove the X-chip off the xbox and flash a full bin, then add the m8.16 bin(1.6only bin). Thanks for all your help guys.

Easybuy2000 · « **Reply #10 on:** March 02, 2005, 08:02:00 AM »

The X-Lite supports the X-Chip Bios 1.3

You should be using that bios/OS with the X-Lite.

nooner · « **Reply #11 on:** March 02, 2005, 09:07:00 AM »

EasyBuy2000,

I don't have the x-lite. I have the x-chip and after using the 1.6only bin, it's working now. Thanks.

Author Topic: 411 X-chip Mod On 1.6xbox For Experts (Read 186 times)