Topic: Fixing D0 And Lines (Read 199 times)

-FP- Pete · « **on:** March 13, 2004, 02:28:00 AM »

Hi...All

Is the Alternate D0 location the same for the 1.5 version Xbox???, as i have seen the image below posted but no reference to which version xbox [please do not guess, if you don`t know then don`t reply]
user posted image

tandao2002 · « **Reply #1 on:** December 23, 2003, 10:11:00 AM »

Ok, im having a probem that most people are having i presume. I have a matrix chip and its fragging green and red or green and orange, Whichever. from my sources of reading around. People tend to tell me that the d0 point is dirty or the lines around it is scratched from the Pins. I pretty much scratched 2 lines around the d0 point. is there anyway to fix this or has anyone found a way to get around the fragging problem. Please help.

tandao2002 · « **Reply #2 on:** December 23, 2003, 01:15:00 PM »

Is there a link or a tutorial on how to do that because i dont want to screw up my xbox again.

tandao2002 · « **Reply #3 on:** December 23, 2003, 08:41:00 PM »

is there anybody out there that can help me?

pontfirebird73 · « **Reply #4 on:** December 23, 2003, 09:22:00 PM »

mafiafan123 · « **Reply #5 on:** December 23, 2003, 11:48:00 PM »

Just get a knife and scrape gently to u see copper and then try to realign it should work it just has that motherboard junk on it

akillamuthafucca · « **Reply #6 on:** December 24, 2003, 12:59:00 AM »

Noobs read first ask questions later.

pontfirebird73 · « **Reply #7 on:** December 24, 2003, 05:58:00 AM »

i would check the continuity of all traces around the D0 point if using the alternate D0 spot doesn't work for you. i had that problem before from a bad switch installation and i lifted the trace on point A15.

Author Topic: Fixing D0 And Lines (Read 199 times)