Topic: What Tx Pcb To Get For Hitachi Dl10n Drive (Read 247 times)

yamahar1racer · « **on:** February 06, 2013, 11:34:00 AM »

I cannot find a clear answer on what Team Xecuter PCB replacement I should get for my Hitachi DL10N drive

Do I get this: http://www.xconsoles.com/products/tx-liteo...t-pcb-1175.html

I have the console RGH so I have my DVD Key already

boneym · « **Reply #1 on:** February 06, 2013, 11:56:00 AM »

QUOTE(yamahar1racer @ Feb 6 2013, 06:34 PM)

I cannot find a clear answer on what Team Xecuter PCB replacement I should get for my Hitachi DL10N drive

Do I get this: http://www.xconsoles...t-pcb-1175.html

I have the console RGH so I have my DVD Key already

yes but you going to need a slim liteon donor drive
to fit it in, it wont fit in your hitachi.

BigSteel · « **Reply #2 on:** February 06, 2013, 03:48:00 PM »

This is going to be a crazy expensive solution for Hitachi drives. RGH chip is approx $25, PCB is $75, Liteon slim drive is $65'ish. Total bill could be over $150 and that assumes you do the RGH work yourself. Might be simpler and cheaper to just sell your Hitachi unit and buy an older slim with Kamikazee'able dirve. Just my thoughts....

yamahar1racer · « **Reply #3 on:** February 06, 2013, 10:17:00 PM »

QUOTE(BigSteel @ Feb 6 2013, 04:48 PM)

This is going to be a crazy expensive solution for Hitachi drives. RGH chip is approx $25, PCB is $75, Liteon slim drive is $65'ish. Total bill could be over $150 and that assumes you do the RGH work yourself. Might be simpler and cheaper to just sell your Hitachi unit and buy an older slim with Kamikazee'able dirve. Just my thoughts....

I already have my console RGH

Gimpmaster3201 · « **Reply #4 on:** February 10, 2013, 07:03:00 AM »

I'd say go for an xK3y, much better option. No need to burn discs or get a donor Liteon drive so will be cheaper overall.

Takashi · « **Reply #5 on:** February 10, 2013, 07:14:00 AM »

QUOTE(BigSteel @ Feb 6 2013, 06:48 PM)

This is going to be a crazy expensive solution for Hitachi drives. RGH chip is approx $25, PCB is $75, Liteon slim drive is $65'ish. Total bill could be over $150 and that assumes you do the RGH work yourself. Might be simpler and cheaper to just sell your Hitachi unit and buy an older slim with Kamikazee'able dirve. Just my thoughts....

Your prices are quite excessive. For one thing, he doesn't need to buy a complete 16D4S, just chassis minus the pcb = $30 + shipping, he's already got the key = $0, LTU board = $68

Gimpmaster3201 · « **Reply #6 on:** February 10, 2013, 07:34:00 AM »

QUOTE(Takashi @ Feb 10 2013, 02:14 PM)

Your prices are quite excessive. For one thing, he doesn't need to buy a complete 16D4S, just chassis minus the pcb = $30 + shipping, he's already got the key = $0, LTU board = $68

Add to that the cost of DVD-DLs and the inevitable coasters from trying to get that 'perfect' burn and the fact that the Hitachi drive will just be going to waste unless he goes through the hassle of selling it. I just don't see the appeal of this replacement PCB at all...

Takashi · « **Reply #7 on:** February 10, 2013, 09:22:00 AM »

Maybe YOU don't, but the suggestion to use an Xk3y doesn't help the OP.
I'm attempting to stay on topic.

Gimpmaster3201 · « **Reply #8 on:** February 10, 2013, 09:32:00 AM »

QUOTE(Takashi @ Feb 10 2013, 04:22 PM)

Maybe YOU don't, but the suggestion to use an Xk3y doesn't help the OP.
I'm attempting to stay on topic.

Well it is a discussion forum after all, I was just suggesting other (better) options for the OP, his options are open seeing as he has his DVD key.

yamahar1racer · « **Reply #9 on:** February 11, 2013, 03:10:00 PM »

So i been hearing rumors of Xk3y being banned online, or was that all bull? If it is the case I will just get the Xk3y.

iateshaggy · « **Reply #10 on:** February 11, 2013, 05:37:00 PM »

why would he get an xkey for an rgh?

yamahar1racer · « **Reply #11 on:** February 12, 2013, 01:24:00 AM »

QUOTE(iateshaggy @ Feb 11 2013, 06:37 PM)

why would he get an xkey for an rgh?

to play on live. I have a older dual nand with the cynagos chip and a cool runner.

Gimpmaster3201 · « **Reply #12 on:** February 12, 2013, 07:43:00 AM »

QUOTE(yamahar1racer @ Feb 11 2013, 10:10 PM)

So i been hearing rumors of Xk3y being banned online, or was that all bull? If it is the case I will just get the Xk3y.

There are rumours that MS are working on a way to detect ISOmenu but the remote and WiFi dongle will not be affected.

The xK3y devs seem on top of it, see here: http://k3yforums.com...php?f=5&t=10188

iateshaggy · « **Reply #13 on:** February 12, 2013, 04:06:00 PM »

then go the burn disk method. good luck keeping a dual nand away from the ban hammer.

Gimpmaster3201 · « **Reply #14 on:** February 12, 2013, 05:54:00 PM »

QUOTE(iateshaggy @ Feb 12 2013, 11:06 PM)

then go the burn disk method. good luck keeping a dual nand away from the ban hammer.

What would be the advantage of going the disc route vs ODDE?

Author Topic: What Tx Pcb To Get For Hitachi Dl10n Drive (Read 247 times)