Topic: Fsd With Multi Builder And Rgh (Read 253 times)

kl1k · « **on:** January 19, 2012, 02:38:00 PM »

I struggling to get my head around this and can't get it working.

I've got my RGH working and have run multibuilder which created the nandflash.bin. I then booted the console and it installed the bin file.

I then ran xexmenu and run the default.xex for FSD Installer. I"ve followed the menu option and installed FSD to the HDD and also Dash Launch. When I now boot the console it goes straight in to FSD. All good there.

How do I boot into the xbox dash - I've tried holding down the X button (Which I read somewhere loads the MS dash) - it doesnt do anything. Also tried the B and A buttons. Nada.

Any ideas?

TheRealJPizzle · « **Reply #1 on:** February 02, 2020, 09:30:00 PM »

Hold RB(right bumper) on boot

steveo1978 · « **Reply #2 on:** February 02, 2020, 10:00:00 PM »

A little trick I have done is put a launch.ini on a USB flash drive and when I turn on the 360 with the USB drive in it will go to Xbox dash. You can also do it where the only way it will go to FSD is if the USB drive is in the port when you turn on the 360, that will make it safer if you have kids or people that play on the 360 and might mess with stuff they shouldnt.

kl1k · « **Reply #3 on:** January 20, 2012, 02:19:00 PM »

QUOTE(TheRealJPizzle @ Jan 20 2012, 06:30 AM)

Hold RB(right bumper) on boot

Awesome! You the man! Thanks - that did it. Can't believe I missed that one

hangover · « **Reply #4 on:** January 21, 2012, 02:45:00 AM »

QUOTE(kl1k @ Jan 21 2012, 08:19 AM)

Awesome! You the man! Thanks - that did it. Can't believe I missed that one

Or if you are a bit slow, hit guide button then across to settings.

Author Topic: Fsd With Multi Builder And Rgh (Read 253 times)