Print

[Pacotera]

Ok so after lots and lots of users asking about installing freeboot without a full dump (for those who bought a x360 with XBR already installed or simple lost the backup) and no answers i tried and got success.

This is what i did (and you should do but remember you need the files from the SAME MOTHERBOARD as your x360!)

I have a Jasper 16mb with XBR installed:

- First i booted into xell/xellous (with eject) and copied my CPU KEY

- Executed flash360 with a pendrive connected and made a full backup of my XBR3 nand

- Using 360 Flash tool already configured with my own CPU KEY and 1BL key (google for 1BL key) open the image.

- Extract SMC and Keyvault (just click on the extract button and select those)

- You will get 4 files. Rename KV_dec.bin to KV.bin and SMC_dec.bin to SMC.bin.

- Copy those files to the freeboot folder "DATA"

- Following freeboot's readme copy all files from 9199.zip to "DATA" folder aswell

- Now you will need the files below from a donor nand. Thanks to Skevus for his files (extracted from his jasper 16mb 7xxx backup).

      - crl.bin
      - crl.bin.meta
      - extended.bin
      - extended.bin.meta
      - odd.bin
      - odd.bin.meta
      - secdata.bin
      - secdata.bin.meta
      - smc_config.bin

- After that run the following command on cmd:

 ibuild.exe c freeBOOT -c [console] -d data\ -p [cpu key] -b [1BL key] bin\image.bin bin\fuses.bin


- A image.bin file will be created on "BIN" folder. Rename it to updflash.bin and copy to the root of your usb drive.

- Using flash360 flash the file to your x360 (i received a "not zeropaired image" error but ignored and all went fine)

- Thats it!


Please try and post back it it worked ok. I tested with 0.032 release of freeboot. If anything goes wrong you can always flash your XBR backup using LPT/USB

This post has been edited by Pacotera: Apr 19 2010, 08:01 AM

[Neptune]

Remove the 1BL key. That is not allowed.

[whackawookie]

QUOTE(dakaku @ Apr 19 2010, 02:36 PM)

Could some1 please send me these from a Jasper 256, maybe 512 works too.
Thanks in advance.

     - crl.bin
     - crl.bin.meta
     - extended.bin
     - extended.bin.meta
     - odd.bin
     - odd.bin.meta
     - secdata.bin
     - secdata.bin.meta
     - smc_config.bin

i got 512 but from 7363. up to you

[dakaku]

ill give it a try
Edit: Well i have a full dump, but from my 6712 (which has no smc_config.bin ? At least i cant extract it with 360 flash tool).
Im just trying to go around the update (resistor removed).

[whackawookie]

QUOTE(dakaku @ Apr 19 2010, 02:54 PM)

ill give it a try
Edit: Well i have a full dump, but from my 6712 (which has no smc_config.bin ? At least i cant extract it with 360 flash tool).
Im just trying to go around the update (resistor removed).

check your pm's and let me know how everything goes

[dakaku]

Unfortunatly it didnt work, thanks anyway.

[Skevus]

QUOTE(dakaku @ Apr 19 2010, 06:23 PM)

Unfortunatly it didnt work, thanks anyway.

 Did your 360 ever work???

smc_config.bin is esential and very Consol specific....

P.S you get your smc_config.bin by extracting your original Dump with ibuild witch is included in FreeBoot 0.032...

[dakaku]

ibuild gives a error message, when i try to run it with my 6712 image
(i used the command from the readme)

QUOTE

ERROR: Data in block 0, page 0, plane 0 is corrupted.
ERROR: Unhandled exception.

Uhm block 0,page 0... ? Is this the date ? Maybe i changed it and forgot to rechange, its 2004-2007.

Edit: changed back to -2008 and now i get

QUOTE

ERROR: Data in block 47, page 50, plane 0 is corrupted.
ERROR: Unhandled exception.

Well, i guess ill just rewrite it, solder r3t6 and update to 7371

QUOTE

Did your 360 ever work

Yes. With xell0.1 ,xbr1,2,3 :-)

[whackawookie]

QUOTE(dakaku @ Apr 19 2010, 04:35 PM)

ibuild shows a error message, when i try to run it with my 6712 image
(i used the command from the readme)

sorry man. what kind of error does ibuild show when you try to extract

[radoman]

Nah, I wouldnt reccomend trying this unless you have an lpt to reflash

I tried this and a few other methods that i figured out. It only works on 1 or 2 xboxes that i tried it on. The rest get christmas lights, rrod or e52 errors.

This is because the ldv values from the orig must match the freeboot image. Ive tried changing them via flashtool. Doesnt work.

[dakaku]

Ive got a usb flasher, so dont worry.

I tried it a couple more times, but i either get E72,E79 or no vid at all with green lights.

Went back to xbr3 now... unfortunatly i only have 1 backup of my original nand left, which seems to be corrupted plus:
I dont feel like soldering to those spots right now.

[ewok666]

It looks simple enough but I've got a few questions ;-)

I have a Jasper 512MB and my original NAND dump is 7363. It's currently runing XBR3. Ibuild extrakts all files from the original nand without any errors. I also used 360 flash tool 0.92 to extract KV.BIN and I'm planning to get SMC.BIN from the XBR3 image I flashed.

The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.

These are the file sizes I got from ibuild and the SMC BIN from 360 flash tool:
2,528       crl.bin
4             crl.bin.meta
16,368     extended.bin
4             extended.bin.meta
16,368     kv.bin
64           odd.bin
4             odd.bin.meta
1,024       secdata.bin
4             secdata.bin.meta
12,288     SMC.bin
131,072    smc_config.bin

Is this normal? Can I use the files that ibuild extracted and the smc_dec.bin from 360 flash tool?

TIA

[Stonerman023]

QUOTE(ewok666 @ Apr 20 2010, 03:24 AM)

The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.

This is my problem exactly, I followed the tut but can´t continue because ibuild won´t let me build the image with an oversized kv.bin. I tried removing 16 bytes of 00´s, but ibuild then crashes..? and it crashes when i remove the first 16 bytes too..

Running win7 x64

[cocker80]

QUOTE

The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.

I was gettting the same error on my xenon, if you remove the first 16bytes from you kv.bin it should work.  

If anyone has the files for a 256mb jasper can you send the to me as i have lost my orginal nand dump.

If anyone needs the files for the xenon i have uploaded them here...
http://filejumbo.com...5CEAD4B6E99602C

Cheers.

[cocker80]

QUOTE(Stonerman023 @ Apr 20 2010, 11:29 AM)

Just added a dual boot with xp32, just to see if it was my win7 64 that made trouble..

But Ibuild still crashes when I give the command
"ibuild.exe c freeBOOT -c xenon -d data\ -p CPU -b 1BL bin\image.bin bin\fuses.bin"

Whats going on..?

 do you have the vc++ redistributable installed? Download it from here... http://www.microsoft...;displaylang=en