Topic: 360 Elite 2009,01,04 Exploitable? (Read 218 times)

alan_poh · « **on:** December 07, 2009, 01:16:00 PM »

MFD 1st April 2009 ?

YES, you can dump the key from that....

you will run in problems if you buy a MFD august 2009....

there is a method of dumping that too now, but if you dont want (and dont know how) to solder and cut traces then its good to buy some older then august 2009....

and of course, its a Jasper.... you really are a noob right :-) no offense... :-)

Bukmop · « **Reply #1 on:** December 07, 2009, 01:43:00 PM »

QUOTE

If it is hackable ,

Check the dashboard\kernel version. If its less than 8xxx that its hackable.

SoloStyl · « **Reply #2 on:** December 07, 2009, 03:43:00 PM »

Thanks for the replies fellas.

(But NOT the Noob insult !!

Actually, I've dumped my Falcon NAND,(for HDD unbanning Mod), and I'm really good with soldering skills.

Damn, didn't expect to hear it might be a Jasper though, Bummer.

I havent looked into "cutting traces" on those boards since I dont have one, but I'm sure with the Awsome tuts that are posted here, it wont be hard to find whick ones to cut. BTW, I also have a Trace Recovery Soldering kit and a MicroScope, "NOOB". LOL

j/k

If its a Jasper, (I bet your right Bukmop) , definitely gonna need USB Dumping. It takes 48 mins. per dump on my Falcon. Read somewhere it can take 8 hours on a 512 Meg Jasper! AARGH

Thanks again Fellas, I'll keep ya posted.

SoloStyl · « **Reply #3 on:** December 08, 2009, 09:12:00 PM »

Okay, Bought a new one.

256 Meg Arcade that was made 2009-04-28.

getting ready to take apart and start soldering.

heres a quick question: should I dump the NAND BEFORE I ever turn on the 360 for the first time??

or would it matter if I turn it on and then Dump the NAND?

Im just guessing here, but if the NAND has never been used or written to- by turning on the 360, it would be better right? sort of having an "untouched" Nand Dump.

what do you guys think?

under420dog · « **Reply #4 on:** December 08, 2009, 11:38:00 PM »

wo0000, slow down there speedy...first yes fire it up and look what dash version you have in system info....it's gota be 7173 or lower i think i am tired now,sorry
then you will be able to see if it can do the jtag hack...if not just hook it up for the nand dump...just to save for the future...

SoloStyl · « **Reply #5 on:** December 09, 2009, 03:29:00 AM »

Wait, now im more confused.

quote "jhnblckwood" said

check the manufacturing date: and if that dont help you then your gonna have to try to dump and see...
as long as you dont have a new xbox than 7371 and below is fine..

wondering if its worth the waiting a few hours and doing the NAND on this board....

edit: seems the kernel is ok, but I have to Dump it regardless to find out the CB values , double DAMN lol

SoloStyl · « **Reply #6 on:** December 09, 2009, 01:15:00 PM »

dumped a 2meg NAND
dumped a 16meg NAND

my Box says it has 256MB onboard memory, but when dumping with NandPro20 , it says "512 Flash detected".

so what is it a 256 or a 512 Jasper? (havent done the Full NAND Dump yet) until im sure waht size it really is.

Also, how do I check the "CB/CD" versions?

i ran 'em through xbox 360 flash tool, and of course it says "not supported".
I also changed "M$ 2004-2008" TO "M$ 2004-2005"

any other tools that can show "CB" values, or just need to install Jasper256/512_hack.bin?

the more posts I read, the more confusing its getting. been at this for days now.

SoloStyl · « **Reply #7 on:** December 09, 2009, 02:06:00 PM »

well i was able to read the 16Meg file with 360Flash Tool.

CB,CD = 6723
CE = 1888
Patch 0 = 7357

So, what do you guys think, "exploitable"? even though its CB/6723 and not 6712, should I keep this thing or get rid of it?

thanks in advance

Zheez · « **Reply #8 on:** December 10, 2009, 02:31:00 AM »

Yes Jasper CB 6723 is exploitable so I would keep it.

arielzadi · « **Reply #9 on:** December 10, 2009, 03:44:00 AM »

i have a question...
Just got a new arcade with a 93 lite on and the kernel is 73 or 76 something i dont remember.... Is there any chanse that i could find out the cb so icould know if its exploitable?
Thanks

torne · « **Reply #10 on:** December 10, 2009, 05:05:00 AM »

The only way to tell for sure is to dump the NAND and look at the dump. The manufacturing date is only a clue

arielzadi · « **Reply #11 on:** December 10, 2009, 05:19:00 AM »

so lets say that i dumped the nand...
How do i check?

torne · « **Reply #12 on:** December 10, 2009, 07:29:00 AM »

Load it up in the flash dump tool and it will tell you the version of each section. There's also a tool around somewhere which literally just displays the CB version..

SoloStyl · « **Reply #13 on:** December 10, 2009, 02:46:00 PM »

WTF!!

Everytime i solder the JTAG wires, my power brick light turns RED!!

i already checked the welds, ran through continuity tests, even soldered a
330ohm resistor on J2D2.4<->J2D2.7 as another user suggested.

as I stated before , DB1F1 solder came off , so I scraped arround it and added some solder and welded Diode onto there. all diodes are lined up properly too.

All im trying to do is use nandPro to write the "hacked_jasper_256/512.bin" so I can get my KV/CPU Key.

SpIdErXeN · « **Reply #14 on:** December 11, 2009, 05:22:00 PM »

Hey Solo, I feel all your pain bro. I just bought an arcade unit today that has a mfg. date of 2009-04-17. Mine also has a Dash Value of 2.0.7363.0 and Kernel Value of 2.0.1888.0. After setting up the unit, creating an avatar, setting the initial settings, I checked the "Memory" section, it said I had 322mb left of writable space.

So, I'm thinking I have a 512mb Jasper, right? I'm not really sure since I'm an ultra noob to the NAND side of things, I was mostly into the drive firmware side of things. Anyways, I believe it's the power connectors on the power supply cable that tell you which version of the console you have, right?

I imagine my console is nearly identical to yours, in terms of mobo versions, etc. My question is, are our consoles Jtag-able? I'd kill to get homebrew running on this thing man, that's all I want for Christmas. lol

Author Topic: 360 Elite 2009,01,04 Exploitable? (Read 218 times)