Topic: No Black And Yellow Wires. Thanks Divineo (Read 134 times)

jimjumus · « **on:** October 04, 2005, 08:36:00 AM »

I bought a x-.bit 1.5 form diviineo. I've bought mod chips from other suppliers and got the yellow and black wires to connect to the USB/Dip switch part to the main chip.

Have installed everything and got the xbox working fine with other yellow & black wires but they are necessary for the chip to work as far as I can tell. Still waiting for a response from Divineo.

Is there any way to run the chip withought the dipswitch/usb part???

Very pissed.

Silentscream__ · « **Reply #1 on:** October 04, 2005, 09:31:00 AM »

Unfortunately there is no way to flash it, although if you can borrow the wires from somewhere else, the chip will run the bios in bank 1 without the external board attatched.

If divineo do not respond, send them plenty of emails till they do, and you could also try the BST forums here.

jimjumus · « **Reply #2 on:** October 04, 2005, 04:12:00 PM »

I have the yellow and black wires from another x-bit so I'll try flashing onto bank 1. I hope it's that easy!

Thanks for your help!

jimjumus · « **Reply #3 on:** October 06, 2005, 08:13:00 PM »

Just to let other people know, flashing to the number 1 slot worked fine on two xbox's, without the dipswitch/usb part or the yellow and black wires.

Thhnks again for your help!

Author Topic: No Black And Yellow Wires. Thanks Divineo (Read 134 times)