Topic: X-b.i.t V 1.5 O.k Chip (Read 209 times)

Cam3lto3 · « **on:** June 21, 2005, 11:07:00 AM »

Hello, I just purchased a X-B.I.T V 1.5 and now im starting to read that people are haveing prolems installing this chip and flashing it. The only reason i purchased this chip is because it is my first mod and I dont want to waste money if i dont like modding. Well my first question is, is the X-B.I.T an OK chip once you can get it flashed with a bios and once you get it installed successfuly. Second question, would X2_4983 be a good BIOS to use seeing ive read that people have the most success with that BIOS.

Thank You,
Cam3lto3

This post has been edited by Cam3lto3: Jun 21 2005, 06:14 PM

Silentscream__ · « **Reply #1 on:** June 21, 2005, 11:59:00 AM »

The xbits are normally OK for installaion on a 1.1-1.5, however the 1.0 which has solder filled LPC holes, is almost impossible to get the chip to seat correctly, and if you have a 1.6, then you are pretty much screwed as the xbit is a horrible chip to install on a 1.6.

X2 4983 is a good bios to use, provided you dont have a 1.6 - if you do you will need a newer verison of the X2 bios, or the evox M8+ bios.

Nunim · « **Reply #2 on:** June 21, 2005, 12:18:00 PM »

It took about 3 hours with a magnifying glass and a flash light but I got it to work on my 1.0 box. The large memory size and easy flash is great.

wolf202 · « **Reply #3 on:** June 21, 2005, 12:44:00 PM »

if its installed correctly it'll function fine

-wolf

Cam3lto3 · « **Reply #4 on:** June 21, 2005, 04:59:00 PM »

Thanks for the responds, I have a v 1.4 Xbox so as i heard it should be to much of a pain to install. As for the Bios i will use the on suggest by every one else.

Author Topic: X-b.i.t V 1.5 O.k Chip (Read 209 times)