Topic: New Xbox Ver 1.2 Install ? (Read 711 times)

007jamesbond · « **on:** March 05, 2003, 08:07:00 AM »

are you sure you got a 1.2 then? and if so could you make also some pictures of it

kaioshade · « **Reply #1 on:** March 05, 2003, 09:40:00 AM »

i think he meant whether you were sure if you had a 1.2 but since you know about the pictures, i assume you know what version you have. one of your solder points might be bad in that case, check those.

IBNewBe · « **Reply #2 on:** March 05, 2003, 02:28:00 PM »

Has anyone had any sucess installing the X-Ecuter II lite in the New XBox Ver. 1.2 yet? Or anyother Mod's.

If you have, please post with your results and how you dit it.

Thanks...IBNewBe

SlimDady · « **Reply #3 on:** March 05, 2003, 08:47:00 PM »

i have not heard a thing on anyone getting it to work yet

xboxhackern00b · « **Reply #4 on:** March 06, 2003, 01:53:00 PM »

i have go to http://www.xtreme-xb...e=print&sid=312

XbOxGoD · « **Reply #5 on:** March 06, 2003, 03:12:00 PM »

it's not been modded, it appears as tho l33 is a liar

IBNewBe · « **Reply #6 on:** March 07, 2003, 06:33:00 PM »

OK This is how far I got with this install. I hope someone else can help with getting this thing going.

I Installed the X-Ecuter II lite in the XBox v1.2 using the v1.1 steps and the d0 that was shown in another post (the small grayed dot.)

I booted the machine with the original HDD and it showed the X-Ecuter II where the MS logo was.

I booted again using my customized Slayer's automated installer DVD, everything looked normal.

I removed the original HDD and installed a Maxtor 120 gig. (Making sure the jumper was in the right place) and rebooted the machine again. This time I got an error 06.

I removed the 120 giger and installed a different but original untouched HDD and rebooted then got the error 06 again.

I removed the HDD mentioned above and reinstalled the original (the one that came in this XBox and rebooted again with my customized Slayer's again and all seemed normal again.

OK this is all I know, can anybody help me from here.

Thanks to all...IBNewBe...

BenJeremy · « **Reply #7 on:** March 07, 2003, 06:45:00 PM »

QUOTE (IBNewBe @ Mar 7 2003, 10:33 PM)

OK This is how far I got with this install. I hope someone else can help with getting this thing going.

I Installed the X-Ecuter II lite in the XBox v1.2 using the v1.1 steps and the d0 that was shown in another post (the small grayed dot.)

I booted the machine with the original HDD and it showed the X-Ecuter II where the MS logo was.

I booted again using my customized Slayer's automated installer DVD, everything looked normal.

I removed the original HDD and installed a Maxtor 120 gig. (Making sure the jumper was in the right place) and rebooted the machine again. This time I got an error 06.

I removed the 120 giger and installed a different but original untouched HDD and rebooted then got the error 06 again.

I removed the HDD mentioned above and reinstalled the original (the one that came in this XBox and rebooted again with my customized Slayer's again and all seemed normal again.

OK this is all I know, can anybody help me from here.

Thanks to all...IBNewBe...

If you do have the progress you've stated so far, PLEASE get us confirmation in the form of digital pics of your system with the mod installed.

IF you are being truthful (once bitten, twice shy), it sounds as though everything is perfectly normal. Installing a hard drive will illicit an error, merely becuase it hasn't been formatted.

rjm2k · « **Reply #8 on:** March 08, 2003, 03:33:00 AM »

The different but untouched original probably didn't work because it was still locked for the box it belonged to. Are you sure that the 120gig wasn't locked too, has it ever been in another xbox?

IBNewBe · « **Reply #9 on:** March 08, 2003, 04:01:00 AM »

rjm2k....Nope, The 120 giger was fresh out of the sealed package.
Is there a way to unlock the HDD if I can't get the XBox to boot with my Slayer's DVD in it?

Thanks for the help...IBNewBe...

IBNewBe · « **Reply #10 on:** March 08, 2003, 08:04:00 AM »

OK I have the pictures now but I don't know how th post them.
If someone will tell me how I will post them right away?
The pic's are .jpg

Thanks...IBNewBe...

This post has been edited by IBNewBe: Mar 8 2003, 04:09 PM

XbOxGoD · « **Reply #11 on:** March 08, 2003, 10:31:00 AM »

check your pm i will host the pics for you on my website, it's the only way to show the pics on the forum

rjm2k · « **Reply #12 on:** March 08, 2003, 10:34:00 AM »

Unless you have a backup of the password generated by the box the drive came from, or it was locked using config magic, the only way to unlock it is to put it back in the original box and use config magic to unlock it.

IBNewBe · « **Reply #13 on:** March 08, 2003, 11:46:00 AM »

rjm2k
Thanks for the info. I will try this later.

Thanks...IBNewBe...

BenJeremy · « **Reply #14 on:** March 08, 2003, 12:47:00 PM »

The first three are clickable to larger versions.

These were posted by IBNewB over in the Team Xecutor forums.

Author Topic: New Xbox Ver 1.2 Install ? (Read 711 times)