Print

[birdzs6]

bump

[birdzs6]

for the second Bump

[wolverinegod]

stop bumping
do a header pin install

[birdzs6]

I also havent Flashed the chip or anything like that at all, should i do that???

[mastertito4]

well give us more info, does ur xbox start up? what does it do exactly?

[mastertito4]

r u sure the modchip is turned on?

[mastertito4]

haha well i just thought id throw it out there, u never know what is goin on u know... anyways ur xbox is FRAGging (frag = flashing red and green) u might wanna check to see if the chip is on UNprotected and (im not familiar with pogopins so dont laugh but...) check the d0

[mastertito4]

its alright some n00bs just barge in here demanding assistance so u made a good first impression

havin said that, unprotected is a switch on the chip... i forget what it does but i do know u need to have it switched to unprotected... i think it protects any writing to the xbox or chip or somethin....

if the d0 is in right the xbox with boot cromwell bios (until u flash it, that is)... i would take a flashlight and look at the midget wire and see if it at least looks like the solder or wire is touching the inside of the little d0 hole

[mastertito4]

im not familiar with pogo pins and apparently its like a fuckin crime to try to help (X30n) so i dunno ur gonna have to have some1 else to help u

[mastertito4]

x30n is gettin all mad at me cuz i said somethin wrong when tryin to help some1... anywhoo if ur chip is working u will get a screen that says somethin about cromwell bios at the top and it will ask u to insert bios update... also if u get a black screen it might be working, its just that cromwell is very shitty and doesnt load everytime

[mastertito4]

is it workin?

[birdzs6]

Well now something new has come up.... When i turn on it doesnt go on off on off on off or whatever. it jsut turns on then ist blinks greeen and orange...

[Intelligoth]

Check my response in this thread.

http://forums.xbox-s...T&f=18&t=100698

I think your best option is to go back and check your work.  Maybe there's a bad solder connection or a short somewhere.

[Intelligoth]

QUOTE (Drewdatrip @ Sep 9 2003, 12:10 AM)

QUOTE (Intelligoth @ Sep 9 2003, 08:39 AM) Check my response in this thread. http://forums.xbox-s...T&f=18&t=100698 I think your best option is to go back and check your work.  Maybe there's a bad solder connection or a short somewhere. As far as i can tell from his posts, hes using a pogo pin, and thus has done no sodering. Additionaly i think you mentioned that you purchased a 2.2 pro, which is not flashed with a bios. You need to prgram you mod chip with the bios to get it to boot properly.   Either look into getting a LITE version or a pro programer. |Drew|

I use X-ecuter 2.2 Lite chips mounted with the Pin Header method and using bottom d0 point.  Never had a problem modding this way.

The fellow who's having the problem is using a 2.2 Pro.  He's also using Pogo Pins which, from what I have read on other posts, tend to be unreliable and often misalign.

Programming a 2.2 Pro shouldn't be a hassle, since it comes with it's own parallel connection.  All you need is a 25 pin cable, a PC and the X2Cable.exe program.

The 2.2 Lite and Pro both have the 12-Pin header on them.  2.2 Pro should ship with the pin-block which could then be soldered into the LPC Debug points.  This is a much better idea than using Pogo Pins since the connection is far more solid.    IMHO I think he should ditch the Pogo and start soldering.

[chinmi]

i'm an ex pogo user with my 2.2pro....
you should do that too...
forget the pogo and do the 9 wire solder install.....