Topic: Networking your Xbox (the best guide so far...) (Read 1684 times)

nfs924 · « **Reply #30 on:** May 03, 2004, 05:35:00 PM »

i never knew that, thanks

jay_sison · « **Reply #31 on:** May 08, 2004, 09:30:00 PM »

i still cant get this thing working. there's a "network cable is unplugged" icon on my taskbar and on my evox is a "no link". ive reinstalled all the drivers, followed these instructions but still none works.

mrRobinson · « **Reply #32 on:** May 09, 2004, 03:37:00 AM »

That's typical of either not using a crossover cable when you should be or the cable being bad. If you want quicker help though start a new topic in newbie chat with your problem.

jay_sison · « **Reply #33 on:** May 09, 2004, 03:24:00 PM »

okay, i bought a crossover cable this morning and connected it to my xbox. i followed ur instructions and still nothing happens so idecided to tweak it on my own. i finally got it right when i connected using flashfxp and it says connected to xbox but afterwards it says connection lost. what should i do?

mrRobinson · « **Reply #34 on:** May 11, 2004, 05:17:00 PM »

Damn it man, start a topic in newbie chat so many others will help and when you reply it gets posted right away...

If you want quicker help though start a new topic in newbie chat with your problem.

gamejunkie666 · « **Reply #35 on:** May 12, 2004, 02:33:00 AM »

thanks and cheers MR Robinson i've only had my chip fpr a few hours but thanks to your fantastic tut i finally nailed it.

flyingkiwi · « **Reply #36 on:** May 13, 2004, 05:29:00 PM »

Can you help a little.

I have had no prob connecting/ftping , and have run the cmd flashbios, worked fine, but cant seem to find any other commands , is there format to run a default.xbe file.

cheers

mrRobinson · « **Reply #37 on:** May 21, 2004, 03:14:00 AM »

You can't launch any xbe's via ftp. At least no way that I'm aware of. For a list of all evox commands available read this:
http://www.xbox-scen...evocommands.php

gamerguy999 · « **Reply #38 on:** May 31, 2004, 10:24:00 AM »

is there anyway to ftp to an unmodded xbox? I have the mech installer on the harddrive?

gamerguy999 · « **Reply #39 on:** May 31, 2004, 10:59:00 AM »

I am trying to put linux on my box with the mechinstaller, but I am having trouble ftp'ing tp my xbox, is there anyway that you can do it without Evox?

mrRobinson · « **Reply #40 on:** May 31, 2004, 07:13:00 PM »

You don't need evox but you do need some program (or bios) running that is acting as your ftp server. It can be from a boot disc or installed to your hdd. All major dashes not hacked from the orig msft dash (like thc) run ftp servers. You can get more help getting Linux on your xbox by posting in the *nix OS on Xbox forum.

tommy2hotty · « **Reply #41 on:** June 08, 2004, 08:29:00 AM »

My computer is in another room to so I have a flashing orange lgiht... so you do need that cable plugged in?? I set up all the IP's like it says for configuration 1 (computer with a cross over ethernet cable to xbox) and got it to ping... it goes 4 times and says unreachable then says 4 connects, 0% lost and what not. Then i try to FTP through Internet Explorer and it says timed out blah blah blah. Im using the avalaunch dash... how do I set up the password and username for the network through that?? One guy said I may just need to get a router and try that instead. I live in an area that doesn't get broadband so I use dial up. So I enable my LAN for the xbox. Have any ideas?

Cashmonn · « **Reply #42 on:** June 08, 2004, 03:27:00 PM »

Hi I have Sympatico High Speed and am connected with 2 straight through cables to a hub. I set all me ip adresses just as your guide told me to. When i try to connect with flashfxp i get the Connection failed ( Connection Timed out) do I just have a setting wrong or is it something bigger. Thanks a lot for your help.

Dolfhin · « **Reply #43 on:** June 09, 2004, 06:34:00 AM »

I'm havind trouble to connect to the internet from my Xbox. FTP works like a charm and SMB shares also work(ed, but that's a different story and not related to this

).

My PC has 2 NIC's the first one (let's call it INTERNET) is connected to the internet using a patched cable to a router. Internet on the PC works fine I have enabled Internet Connection Sharing on this NIC).
The second on (called XBOX) is connected to my XBox using a Straight cable.

Using start > excute (or what ever it's called in the english version of Windows) > command > Ipconfig /all I get :

Savejonas · « **Reply #44 on:** June 11, 2004, 04:38:00 AM »

Thanks for the tut Mr. Robinson. Got it working the first time

Author Topic: Networking your Xbox (the best guide so far...) (Read 1684 times)