xboxscene.org forums

Author Topic: 1.0 Xbox Not Flashing  (Read 125 times)

Master-Chief

  • Archived User
  • Hero Member
  • *
  • Posts: 1352
1.0 Xbox Not Flashing
« on: July 15, 2004, 03:39:00 PM »
sad.gif
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
1.0 Xbox Not Flashing
« Reply #1 on: July 15, 2004, 03:49:00 PM »
check your write enable points, they are not bridged properly, thats why evox is IDing it as a winbond (0x0900)
Logged

Master-Chief

  • Archived User
  • Hero Member
  • *
  • Posts: 1352
1.0 Xbox Not Flashing
« Reply #2 on: July 15, 2004, 04:10:00 PM »
QUOTE (lordvader129 @ Jul 15 2004, 08:49 PM)
check your write enable points, they are not bridged properly, thats why evox is IDing it as a winbond (0x0900)

Now I am getting Flash Not Writable. The points are bridged perfectly. I guess this is an un-tsop-able Xbox.  sad.gif

*EDIT*: What I did to make it go from Error File Size Error to Flash Not Writable was add in this to the evox.ini:

Flash = 0xda45,"Winbond W29C020",0x40000
Flash = 0xdab5,"Winbond W39L020",0x40000
Flash = 0xda0b,"Winbond W49F002U",0x40000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0xdab0,"Winbond W49V002A",0x40000
Flash = 0xda46,"Winbond W29C040",0x40000
Flash = 0xdab6,"Winbond W39L040",0x80000
Flash = 0xda3d,"Winbond W39V040A",0x80000

Any ideas?
Logged

acemilo

  • Archived User
  • Hero Member
  • *
  • Posts: 910
1.0 Xbox Not Flashing
« Reply #3 on: July 15, 2004, 04:53:00 PM »
Try enabling the third jumper on the bottom.  If that doesnt work, try using raincoat.
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
1.0 Xbox Not Flashing
« Reply #4 on: July 15, 2004, 06:18:00 PM »
the popints cant be bridged properly, otherwise you wouldnt be getting 0x0900, i know from experience soemtimes a multimeter will say they are bridged but for whatever reason they still arent write enabled

and he must have a 1.0/1.1, so there is not third set
Logged

acemilo

  • Archived User
  • Hero Member
  • *
  • Posts: 910
1.0 Xbox Not Flashing
« Reply #5 on: July 15, 2004, 07:57:00 PM »
Ok, then just check the points again or try raincoat.  I know that raincoat will actually tell you if your points arent soldered correctly, it wont just hang.  Try that first, if it doesnt work then try your points again.
Logged

Master-Chief

  • Archived User
  • Hero Member
  • *
  • Posts: 1352
1.0 Xbox Not Flashing
« Reply #6 on: July 15, 2004, 08:00:00 PM »
QUOTE (acemilo @ Jul 16 2004, 12:57 AM)
Ok, then just check the points again or try raincoat.  I know that raincoat will actually tell you if your points arent soldered correctly, it wont just hang.  Try that first, if it doesnt work then try your points again.

I tried 007 Flasher and I am pretty sure it uses raincoat and it ejected the disc (that means that it didnt work)
Logged

Master-Chief

  • Archived User
  • Hero Member
  • *
  • Posts: 1352
1.0 Xbox Not Flashing
« Reply #7 on: July 16, 2004, 08:35:00 AM »
QUOTE (imamafackinhokie @ Jul 16 2004, 11:14 AM)
i believe you have to use telnet after it ejects the cd but im not positive. blink.gif

No, its supposed to turn off (indicates a good flash). When the disc ejects, it indicates that something isn't right. The disc ejects and it just goes back to the MS Dashboard.  dry.gif
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
1.0 Xbox Not Flashing
« Reply #8 on: July 16, 2004, 01:22:00 PM »
try a regular raincoat exploit, not eurasia
Logged

Master-Chief

  • Archived User
  • Hero Member
  • *
  • Posts: 1352
1.0 Xbox Not Flashing
« Reply #9 on: July 19, 2004, 01:26:00 PM »
cool.gif
Logged

Makaveli16

  • Archived User
  • Newbie
  • *
  • Posts: 1
1.0 Xbox Not Flashing
« Reply #10 on: August 08, 2004, 10:59:00 AM »
ya, where r they?
Logged

pinkel

  • Archived User
  • Newbie
  • *
  • Posts: 3
1.0 Xbox Not Flashing
« Reply #11 on: August 09, 2004, 09:51:00 AM »
QUOTE (Makaveli16 @ Aug 8 2004, 07:02 PM)
ya, where r they?

Nobody??? unsure.gif
Logged