Topic: 1.5 Xenium Install (Read 82 times)

EmperorPsiblade · « **on:** January 24, 2004, 04:22:00 PM »

thanks!

Morglum · « **Reply #1 on:** January 24, 2004, 04:29:00 PM »

EmperorPsiblade · « **Reply #2 on:** January 24, 2004, 04:31:00 PM »

thats what i did and it didn't work...
alright... i found this:
user posted image

now i'm just wondering how i could implement this....

Morglum · « **Reply #3 on:** January 24, 2004, 04:33:00 PM »

Replace those red lines with soldered bits of wire.

EmperorPsiblade · « **Reply #4 on:** January 24, 2004, 04:38:00 PM »

i just wonder if i should solder it to the mobo directly or to the pin header......

Morglum · « **Reply #5 on:** January 24, 2004, 04:55:00 PM »

EmperorPsiblade · « **Reply #6 on:** January 24, 2004, 05:06:00 PM »

in that picture.. is the power arrow pointing to that via or the resistor? it looks like they could be the same point too...

just wanna make sure before i solder the power in....

EmperorPsiblade · « **Reply #7 on:** January 24, 2004, 06:09:00 PM »

Morglum · « **Reply #8 on:** January 24, 2004, 06:13:00 PM »

EmperorPsiblade · « **Reply #9 on:** January 24, 2004, 06:42:00 PM »

thanks Morglum

a note: it IS true that if it doesn't work it is most likely ur d0 point!!!!

Author Topic: 1.5 Xenium Install (Read 82 times)