Topic: X3 Ce On 1.6 - Alternate 5v Wire Lost (Read 246 times)

shambles1980 · « **on:** October 05, 2012, 07:37:00 PM »

guess im a bit late here lol..

But its the pin nearest the center of the chip..
"the one thats farthest away from the edge."

MrMajst3r · « **Reply #1 on:** August 21, 2012, 11:36:00 AM »

Hi (IMG:style_emoticons/default/smile.gif) I want to install X3 CE on 1.6 Xbox. But I haven't got alternate 5V wire. I would solder wire directly to connector pad, but there are 2 pads. Which should I use?
(IMG:http://obrazki.elektroda.pl/6080283600_1345566757.jpg)

turfster · « **Reply #2 on:** August 21, 2012, 09:23:00 PM »

I think I have that wire in my spare parts box. ill pm u tomorrow if i can find it.

MrMajst3r · « **Reply #3 on:** August 22, 2012, 02:08:00 AM »

Because there is very little space around this connector, I came up with an idea to solder wire directly to LPC. But according to manual, I've removed pin from LPC pin6 where 5V normally is.

Can I put this pin back and solder wire to alternate 5V?

MrMajst3r · « **Reply #4 on:** August 22, 2012, 07:06:00 AM »

No, I can't, because on 1.6 motherboard, 5V is always enabled, even when the console is turned off

So, finally I solder wire from alternate 5V to the backside of X3 CE.
IPB Image

Thanks -> http://xbox.x-pec.com/x23bl-v16/

Author Topic: X3 Ce On 1.6 - Alternate 5v Wire Lost (Read 246 times)