i soldered in my spiderchip 1.1 with the pinheader describe here
http://www.hackdabox.com/spiderchip_solder.html. my xbox frags but only when my chip is connected to the d0 point. i also used the alternate d0 point on the back side as well as on the front. i got it working without soldering only 5 times. the 1st time i flashed with evox m8 plus. found out those dont do good on xbox 1.0's.
the other times i got it working was after the bios flash. it would boot up with the evox logo in the corner but to no dash. i could boot originals but not to evox or backups. i used my spider programmer and after about 8 hours i had flashed the x2 4794 bios. still to no availl it frags. wtf is the problem
Thanks for any help