xboxscene.org forums

Author Topic: Duox2 Problem  (Read 583 times)

NewAgePSX

  • Archived User
  • Jr. Member
  • *
  • Posts: 67
Duox2 Problem
« on: December 31, 2004, 10:45:00 AM »
When you flashed the chip did you use CD or network flash if you used network was it a 512 bios? I know cd flash needs 512 bios.
Logged

NewAgePSX

  • Archived User
  • Jr. Member
  • *
  • Posts: 67
Duox2 Problem
« Reply #1 on: December 31, 2004, 01:21:00 PM »
I used network flash and like a idiot used a 256 bios now that chip has had it can't re-flash at all. Both banks just frag. Going to try matrix programmer on the PC and see if that works.  I also tried to hotflash with no sucess got the same error as dpderr
Logged

NewAgePSX

  • Archived User
  • Jr. Member
  • *
  • Posts: 67
Duox2 Problem
« Reply #2 on: December 31, 2004, 03:04:00 PM »
I ended up re-flashing bank 1 with Eurasia flasher disk and a 512 bios.bin disk I am so glad!
Logged

dpderr

  • Archived User
  • Newbie
  • *
  • Posts: 29
Duox2 Problem
« Reply #3 on: December 31, 2004, 11:58:00 PM »
QUOTE(porky145 @ Dec 31 2004, 09:36 PM)
If you could get your hands on a pre 1.6 box you could switch to the other bank and flach the chip with the flash bios on the second bank.
Logged

Dra60nSlayer

  • Archived User
  • Jr. Member
  • *
  • Posts: 91
Duox2 Problem
« Reply #4 on: January 19, 2005, 11:01:00 AM »
I had simular problems with the White version...

I solved it this way...

I soldered D0 & BT on the chip

conneted a Akira 2 to the Pinheader and held D0 to the chassi until the Evox logo appered then i removed the white chip from the ground (D0)
Removed the Akira and placed the Duo X2 White on pinheaders and make sure the red led was flashing...

Then i could flash it in Evox...
Logged