Topic: Xbit 1.5 On Xbox 1.6 (Read 374 times)

RickCA · « **on:** September 29, 2005, 10:27:00 PM »

Hello

In the manual from Mod-chip.com one step says to rebuild the LPC port but it does not show how. Its missing some of the steps. I'm just wondering if it is the same as one of the other chip. Where they have like 5 points at the bottom of the main board.

If anyone knows how to do this step please let me know.

Thanks for the support.

RickCA · « **Reply #1 on:** September 30, 2005, 02:29:00 PM »

I got the LPC rebuild picture and soldered the wires to the bottom of the main board. Flashed the xbit with the only bios that works for 1.6 xboxs. then i soldered the 9 wires of the 1.6 adaptor. Plugged everything together and closed up the xbox. It runs fine, but it won't read burnt disk <_< . Anyone know what i missed??

ShadowSparton · « **Reply #2 on:** September 30, 2005, 07:21:00 PM »

Are you sure you set the dip switches right and maybe thats because you burnt the disc wrong.

RickCA · « **Reply #3 on:** October 01, 2005, 01:28:00 AM »

The dip switches are fine (i used the fourth spot and dips are 1 and 2 on)

Also, the disc work on other xbox's, so it should be good.

Author Topic: Xbit 1.5 On Xbox 1.6 (Read 374 times)