Topic: Black Screen With Spiderchip (Read 37 times)

2deg · « **on:** April 20, 2005, 10:18:00 PM »

Today I install a spiderchip doing the mobo Showed on HackDaBox's when the spider screen pop out i'm try to use the crontrol to flash the chip & i don't have any response usining this(Control) so i turn the xbox off & turn on, now shows nothing but a black screen need your help guys

Chancer · « **Reply #1 on:** April 21, 2005, 07:17:00 AM »

Something not quite right with the install. look over it again for a bad connection or a wire popped of.
You have to use the original M$ controller once you get the flash screen up.

2deg · « **Reply #2 on:** April 21, 2005, 10:56:00 AM »

I check all the points where i soldered the cables everithing looks fine & double checked for any mistake, but still showing nothing,the first time before turned off it was showing the spider screen but problem was that i don't have any reponse using the control so I turned off & then on and thats when the black screeen come on.

2deg · « **Reply #3 on:** April 21, 2005, 12:47:00 PM »

Just to make sure D0 need be soldered with E on The SpiderChip?

Author Topic: Black Screen With Spiderchip (Read 37 times)