Topic: ~ Help Me Make My Xbox Into A True Modder's Xbox ~ (Read 649 times)

twinski9909 · « **Reply #15 on:** March 19, 2005, 04:48:00 PM »

yeah snag their's.

--DANNY-- · « **Reply #16 on:** March 19, 2005, 05:00:00 PM »

lol nice icon!

Um... may I ask how you transfer them? is it just a file on the C drive? and i can just ftp it? How does it work?

SpookieStylez · « **Reply #17 on:** March 19, 2005, 05:03:00 PM »

how come you have the center switch set to disable flash protection?

sS

--DANNY-- · « **Reply #18 on:** March 19, 2005, 05:06:00 PM »

oops didnt notice

wait... i think that is on disable, my switch is wierd, everything is backwards for some of the switches, like when you switch the led switch to OFF the leds turn ON, and i think the flash protection switch is one of them... cuz i remember i had to set all the lights to green when if flashed my bios....

Albino · « **Reply #19 on:** March 19, 2005, 05:12:00 PM »

The eeprom is flashed onto the eeprom chip on the motherboard, you can use configmagic or evox to back it up onto the hard drive on one xbox, then use config magic to flash it from the hard drive onto the eeprom chip on the other xbox.

--DANNY-- · « **Reply #20 on:** March 19, 2005, 05:24:00 PM »

Ok, kool, thanx alot!

-Danny

ahoatam · « **Reply #21 on:** March 19, 2005, 06:07:00 PM »

QUOTE

The eeprom is flashed onto the eeprom chip on the motherboard, you can use configmagic or evox to back it up onto the hard drive on one xbox, then use config magic to flash it from the hard drive onto the eeprom chip on the other xbox.

You really need to double check all this in the Live forum or the Newbie forum - this is case modding. AFAIK, you can only use an EEPROM from a same-version xbox. A 1.0 eeprom can only replace a 1.0 eeprom. IF you don't know your xbox version, then search for one of the version-checkers.

--DANNY-- · « **Reply #22 on:** March 19, 2005, 06:20:00 PM »

^^^^^^^wow... why the hostility?
And I'm not stupid, my bro's have all have v1.0 too. Remember, I've been modding for about a year, I know my shit, just not anything about BIOS's and EEPROM's. And why the hell should I go into a different forum and post and wait for replys about one question, when I can just ask it in a thread that I already started about MY xbox. So if it's a question about My Xbox, then it should probably go into My thread about MY Xbox. It makes sense to me, and is alot simpler and easier....

--DANNY-- · « **Reply #23 on:** March 19, 2005, 06:21:00 PM »

Ok, I just finished putting in the blue 4 led 80mm 12v fan in the back, blowing out, and the 12v 40mm fan on the front left side, where the metal grating is (i cut out a square would it would fit in, then used twist ties to put it in.). It's all together and running on the Evox dash.

These are the system temps after 20 mins of running.
CPU - 135.9 F
MB - 100.4 F

Is that good? Bad? Decent? Basically, is it colder than normally?

I would post pics, but my dad ran off with my camera to work, so I'll have pics up later.

--DANNY-- · « **Reply #24 on:** March 19, 2005, 06:40:00 PM »

After about 40 mins, it's at
CPU - 140 F
MB - 104 F

How's that?

ramos · « **Reply #25 on:** March 19, 2005, 07:37:00 PM »

I don't think he's trying to be hostile, if anything he's helping you.
And the reason to post in the other forum about it is that more people in that forum will be able to answer your question then those in here.
But as everyone's said, you'll need a new EEPROM. If I were you, I'd be safe and go with buying one off Zodiac. He provides you with the EEPROM, and with step-by-step instructions on how to replace your old one. $10 is a small price to pay as opposed to 100+ for a new HDD if something goes wrong.

--DANNY-- · « **Reply #26 on:** March 19, 2005, 07:44:00 PM »

QUOTE(ramos @ Mar 19 2005, 05:43 PM)

I don't think he's trying to be hostile, if anything he's helping you.

--DANNY-- · « **Reply #27 on:** March 19, 2005, 09:16:00 PM »

Here are the pics of the results of my added fans...

Here is the 80mm 4 blue led 12v fan in the back blowing out...

user posted image

And here is the 40mm crystal 12v fan put in on the front left side, blowing in underneath the dvd drive to circulate the air...

user posted image

Both fans inside...

user posted image

Please leave comments/suggestions!

-Danny

Larrimus · « **Reply #28 on:** March 19, 2005, 09:22:00 PM »

Your box is looking good. Question...did your pro switch come with those color LED's or did you change them? I've seen quite a few switches with blue LED's and I hope to have mine the same way. Anyone know how hard they are to change?

--DANNY-- · « **Reply #29 on:** March 19, 2005, 09:29:00 PM »

QUOTE(Larrimus @ Mar 19 2005, 07:28 PM)

Your box is looking good. Question...did your pro switch come with those color LED's or did you change them? I've seen quite a few switches with blue LED's and I hope to have mine the same way. Anyone know how hard they are to change?

Author Topic: ~ Help Me Make My Xbox Into A True Modder's Xbox ~ (Read 649 times)