Print

[spudgunblunder]

I have a Xenon with Toshiba-Samsung TS-H943A MS28 which had been updated on LIVE to Kernel 8955.

I connected SATA cable between MS28 and PC on board SATA (Intel ICH5).

Powered on Xbox and booted PC.

Loaded JungleFlasher v0.1.67 Beta once PortIO32 was installed manually.

Clicked "MTK Flash 32" Tab

Selected I/O port so that the Toshiba drive showed.

Clicked "Sammy Unlock"

Drive went successfully into Vender Mode.

Clicked "Read" button and successfully read Banks 0, 1, 2 and 3.

Saved BIN file but the Drive key showed as all zeros.

I tried opening the Bin file under the "Firmware Tool" tab and the drive key is all zeros.

Closed down PC and unplugged Xbox. Tried a couple of games in the xbox and it says "Please insert into xbox 360".

Tried to read the firmware using Xtreme Boot Maker, DosFlash, MTKFlash and iPrep etc. None would put the drive into vender mode. iPrep gave status code 0x51.


I then got a VIA chip SATA PCI card from ebay. Tried Jungle flash. Same result. Tried Xteme Boot Maker which read the firmware successfully but the key was still zeros when opened with Keychecker, Doskey and Jungleflasher.

Tried iPrep which said "No Drive Key found".

I can't see how this has happened as I hadn't got to the stage of flashing the drive. I've just tried to read it.

Could this be something to do with the new LIVE updates? or is it just me pressing the wrong button?
Live doesn't issue DVD drive FW updates does it?




Is there any way to rescue the drive key from the motherboard with a Kernel 8955 or is it still a max of 7371?

Is there anything worth trying like flashing with the original FW even though Jungleflasher shows the key as zeros.

Thanks.

(Can't find the smiley to show that I feel like I'm running round waving my arms on fire so this will have to do   (IMG:http://209.85.62.26/12250/21/emo/Suicide.gif))

JungleFlasher Log (I saved a key file too):





 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~

JungleFlasher 0.1.67 Beta

Session Started Wed Nov 04 14:12:31 2009



This is a 32 bit process running on a 32 bit CPU

PortIO is installed and running.

Found 6 I/O Ports.

Found 1 Com Ports.

Found 4 windows drives A: C: F: Z:

Found 1 CD/DVD drives F:





Sending Sammy_Un_Lock to Drive on port 0xD000

Stage 1, Complete!

Stage 2, Complete!

Stage 3, Complete!

Done!

Sending Vendor Intro

Requesting Device ID

Manufacturer ID: 0xBF

Device ID: 0xB6

Flash Name:  SST(SST39SF020)

Flash Size:  262144 bytes



Getting Status from port 0xD000

Parallel flash found with Status 0x70



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................



Samsung Dump file saved to C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\SAM-OFW.bin



Loading MTK_Flash source file

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 00000000000000000000000000000000

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: Stock



Key added to database



Getting Status from port 0xD000

Parallel flash found with Status 0x70



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................



Samsung Dump file saved to C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\New Folder\SAM-OFW.bin



Loading MTK_Flash source file

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 00000000000000000000000000000000

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: Stock



Key database updated



Loading Source File C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\SAM-OFW.bin

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 00000000000000000000000000000000

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: Stock



Key data saved to C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\Key.bin





Drive in Vendor Mode! DVDkey files extraction aborted!





Getting Status from port 0xD000

Parallel flash found with Status 0x70



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................



Samsung Dump file saved to C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\SAM-OFW.bin



Loading MTK_Flash source file

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 00000000000000000000000000000000

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: Stock



Auto-Loading target file C:\Documents and Settings\Spudgun2\Desktop\JungleFlasher v0.1.67 Beta (50)\firmware\ix161-samsung.bin

Target File MD5 hash is:  9e8dfe99bf58395e9d5e5b838703297c

Inquiry string found

Identify string found

DVD key found @ 0x40EC key is 77777777777777777777777777777777

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: iXTREME1.61-12x-FINAL-TS-H493A  



Spoofing Target

DVD Key copied to target

Inquiry strings identical

Identify strings identical

Key database updated



Loading Source File C:\Documents and Settings\Spudgun2\Desktop\Xbox360 Firmware\SAM-OFW.bin

Inquiry string found

Identify string found

DVD key found @ 0x4116 key is 00000000000000000000000000000000

Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28

Firmware type is: Stock





Sending Sammy_Un_Lock to Drive on port 0xD000

   a device fault occured

   error register:0x0 (MSB 00000000 LSB)



Getting Status from port 0xD000

Invalid Status 0xF0



Getting Status from port 0xD000

Invalid Status 0xF0

[RRODXbox]

Send me your samsung original firmware dump and I can recover your DVD key. upload it to Megaupload or something then PM it to me.

I dont fully know why this happens but it has something to do with sammy unlock.

This post has been edited by RRODXbox: Nov 7 2009, 06:13 PM

[spudgunblunder]

Thanks for that but still no joy. The drive flashed fine and read back the same drive key but will not play games.

What did you do?

[RRODXbox]

Hmm strange as ive done it before and it worked fine, You need to open the sam-ofw with a hexeditor and look at the offset where the key is stored, as its stored in the FW many times over its usually there.

Key is usually at 40EC so I grabbed it in hexeditor loaded the dump in JF then inserted the key in it and saved it.

Ill have another look for you.

[RRODXbox]

Ok, so I think I accidently shifted one block in the Hexeditor, Ill PM you try two.

[spudgunblunder]

QUOTE(RRODXbox @ Nov 8 2009, 01:11 AM)

Ok, so I think I accidently shifted one block in the Hexeditor, Ill PM you try two.

Have you been flashing and drinking at the same time too? lol "hic"

New craze called Flinking.  (IMG:style_emoticons/default/biggrin.gif)

[RRODXbox]

Haha, I wish  

Did it work thou?

[buttface96]

Did the xbox read games before you tried flashing it?

If you got it secondhand and did not test it before you tried modding it, odds are the noob who previously owned it did not know what he was doing and flashed it that way giving you a nice paperweight.

[spudgunblunder]

RRODXbox I love you!

I can't think how I could thank you enough so for now I will grace your screen with my YoungOnes smileys I made last week.  (IMG:style_emoticons/default/biggrin.gif)

(IMG:http://i17.photobucket.com/albums/b51/heftygrooger/Smileys/YoungOnes_Virgin.gif)

(IMG:http://i17.photobucket.com/albums/b51/heftygrooger/Smileys/Youngones.gif)

Watch these if you don't get them:

http://www.youtube.com/watch?v=fkK4SAUdK6c

http://www.youtube.com/watch?v=vZ_f9nO3zwI

Thanks again. Time for more Flinking! Woo!

[tommyboy420]

I am in the exact same situation...any thoughts? Here is what I currently have:

Sending Sammy_Un_Lock to Drive on port 0xE400
Stage 1, Complete!
Stage 2, Complete!
Stage 3, Complete!
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name:  SST(SST39SF020)
Flash Size:  262144 bytes

Getting Status from port 0xE400
Parallel flash found with Status 0x70

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Samsung Dump file saved to C:\Documents and Settings\LLC\Desktop\ChuckBackup.bin

Loading MTK_Flash source file
Inquiry string found
Identify string found
DVD key found @ 0x4116 key is 00000000000000000000000000000000
Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams25
Firmware type is: Stock

Key added to database
Loading target file C:\Documents and Settings\LLC\Desktop\ix16-samsung.bin
Target File MD5 hash is:  23f5a368839dfc10dabb8231ba64567a
Genuine Samsung iXtreme 1.6
Inquiry string found
Identify string found
DVD key found @ 0x40EC key is 77777777777777777777777777777777
Firmware is Samsung OSIG: TSSTcorpDVD-ROM TS-H943Ams28
Firmware type is: iXTREME1.6-12x-FINAL-TS-H943A

I have triedflashing with MTKflash but it wont find the port. Any idea how I can correct this get the proper CDKey off the drive? I really appreciate any help anyone has to offer