Print

[sohx801]

So,

I recently put in the DuoX 2 white modchip into a xbox v1.6 and I thought I did a pretty good job installing and then I have jumped into problems now. I did a check with the LPC voltages and everything seems to be working. The LED indicator light flashes (presumably working?) and the Evox logo displays upon boot-up. My problem is it shows the logo when booting and then goes straight to the Xbox needs to be serviced screen. regardless if I hold the button down on eject or power or just tap. Boot discs won't work either, does this sound like a pin that's off? I installed verbatimly according to the duomodchip.com diagram.

Any ideas?


Thanks

[quant1c0n]

Do you get an error code? http://www.xbox-scene.com/articles/errorcodes.php

[Ughh]

well from what i read is it goes to the MS dash
if you didnt load a dash see if it will play a bunt dvd of a game
ez way to tell


try to use dvd-r for boot disks works best for me


This post has been edited by Ughh: Sep 28 2005, 09:26 PM

[Chancer]

QUOTE

then goes straight to the Xbox needs to be serviced screen. regardless i

QUOTE

well from what i read is it goes to the MS dash

You need reading lessons I am afraid. see first quote

[Ughh]

Opps guess i do

[sohx801]

OK,

So I found what it was... when I put the board back in the lower plastic box.. one of the wires pulled of from snagging on something. After I re-soldered it works fine now. Sorry for the troubles..

Hey at least I'm honest! ; )