Topic: 360 Multi Builder v0.82 (Read 173 times)

colt45joe · « **on:** February 26, 2012, 06:03:00 PM »

I dont have a dvd drive. this program doesnt seem to support that. Which program should i use that has the option to select that i dont have a dvd drive?

Toddler · « **Reply #1 on:** February 26, 2012, 06:14:00 PM »

How do you edit launch.ini after flashing? Where is this file located using this method?

turfster · « **Reply #2 on:** February 26, 2012, 07:20:00 PM »

QUOTE(Toddler @ Feb 26 2012, 08:14 PM)

How do you edit launch.ini after flashing? Where is this file located using this method?

The launch.ini is in flash in file manager of FSD. Just be careful with flash. Just edit launch.ini and nothing else. Otherwsaie you will screw up your 360's nand.

Swizzy · « **Reply #3 on:** February 27, 2012, 12:29:00 AM »

QUOTE(Toddler @ Feb 27 2012, 07:15 AM)

That explains my confusion, since I rarely use FSD. All I intend to do actually is delete it, since it lives on my hard drive and there is no option with this tool to include the Dashlaunch binaries without a launch.ini.

If there is one on your harddrive that's loaded instead of the one in flash, and the one in flash is ignored

QUOTE(colt45joe @ Feb 27 2012, 02:03 AM)

I dont have a dvd drive. this program doesnt seem to support that. Which program should i use that has the option to select that i dont have a dvd drive?

Do you have a JTAG or a Glitch? my tool supports that for JTAG, however glitch also supports it without any changes

Toddler · « **Reply #4 on:** February 27, 2012, 06:48:00 AM »

QUOTE(Swizzy @ Feb 27 2012, 01:29 AM)

If there is one on your harddrive that's loaded instead of the one in flash, and the one in flash is ignored

I realize that, but I had an issue in the past where a bad entry in launch.ini prevented my 360 from getting past the startup logo, and the fix was to remove the hard drive so that there was no launch.ini present. That would be more troublesome to fix if the launch.ini in flash were causing a problem, and since I don't intend to use it, I feel safer without it.

colt45joe · « **Reply #5 on:** February 27, 2012, 05:19:00 PM »

QUOTE(Swizzy @ Feb 27 2012, 08:29 AM)

Do you have a JTAG or a Glitch? my tool supports that for JTAG...

I have a jtag. what is your tool? where is it?

Swizzy · « **Reply #6 on:** February 28, 2012, 12:46:00 AM »

QUOTE(colt45joe @ Feb 28 2012, 01:19 AM)

I have a jtag. what is your tool? where is it?

http://forums.xbox-s...howtopic=741160

colt45joe · « **Reply #7 on:** February 28, 2012, 01:32:00 AM »

QUOTE(Swizzy @ Feb 28 2012, 08:46 AM)

http://forums.xbox-s...howtopic=741160

Where do i select an option for "no-dvd" ?

Swizzy · « **Reply #8 on:** February 28, 2012, 02:48:00 AM »

QUOTE(colt45joe @ Feb 28 2012, 09:32 AM)

Where do i select an option for "no-dvd" ?

It's in Advanced mode, the xeBuild Settings tab

Edit: Remember to also set it to actually use custom xebuild settings, otherwise it won't use this option...

iwanttheagrocrag · « **Reply #9 on:** February 28, 2012, 07:37:00 PM »

Great program.. Thanks for the updates and all your hard work Rogero

360720 · « **Reply #10 on:** March 03, 2012, 03:40:00 PM »

Hi Guys,

I'm currently running on 13599 dash with Freeboot on a Falcon [jtag]. I just ran the 360 Multi Builder tool and received the warning below. Never had this warning before and want to be sure it's ok to use the created .bin file to update my box. I read somewhere that its nothing to worry about for Jtag's, but want to be sure.

Appreciate any advice.

Thanks !

---------------------------------------------------------------
xeBuild v1.01.421
---------------------------------------------------------------
building jtag image
***** WARNING: could not find a non-zero CF LDV to use, setting it to 1 but that
may be incorrect!
---------------------------------------------------------------
updflash.bin image built, info:
---------------------------------------------------------------
Console : Falcon
NAND size: 16MiB
Build : JTAG
Xell : power on console with console eject button
CPU Key : [removed]
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : [removed]
CF LDV : 1
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

Swizzy · « **Reply #11 on:** March 04, 2012, 01:34:00 AM »

QUOTE(360720 @ Mar 3 2012, 11:40 PM)

Hi Guys,

I'm currently running on 13599 dash with Freeboot on a Falcon [jtag]. I just ran the 360 Multi Builder tool and received the warning below. Never had this warning before and want to be sure it's ok to use the created .bin file to update my box. I read somewhere that its nothing to worry about for Jtag's, but want to be sure.

Appreciate any advice.

Thanks !

---------------------------------------------------------------
xeBuild v1.01.421
---------------------------------------------------------------
building jtag image
***** WARNING: could not find a non-zero CF LDV to use, setting it to 1 but that
may be incorrect!
---------------------------------------------------------------
updflash.bin image built, info:
---------------------------------------------------------------
Console : Falcon
NAND size: 16MiB
Build : JTAG
Xell : power on console with console eject button
CPU Key : [removed]
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : [removed]
CF LDV : 1
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

That's "normal" for JTAG's as they don't care about ldv

just retail and glitch do that...

360720 · « **Reply #12 on:** March 04, 2012, 01:13:00 PM »

Thanks for the response, just done the update, worked a treat

Cheers !

Author Topic: 360 Multi Builder v0.82 (Read 173 times)