QUOTE(bidrug @ Jan 12 2010, 08:58 AM)
I've already formatted the HDD, is a 320 GB Toshiba, but I don't really feel like zero filling the drive since I have put a lot of stuff in the drive....
I don't wan't to clone my disk, I have a 120 GB official drive (which BTW happens to be a Fujitsu) for use in my untouched console, I want this other 320 HDD just for the XBR'ed boxes I have...
I was following the guide OK, but I've got lost in the part where the 0x1381F0000 offset subtract 0x130eb1000 gets 0x7340000, having 734000(0) reversed to get a value to modify xplorer360 to see the drive.... I know if for a 500 GB drive...
So, if someone can explain in to me please, so I can get my 320 GB drive seen in xplorer360, I'll be so thankful and will even be in church every Sunday.
Copying everything between 0x80000 and 0x130eb1000 from your 120 to your 320 will put partition 1 and 2 onto the 320, if you haven't done that already, without affecting what's on the drive.
0x1381F0000 isn't correct for a 320GB drive, to find the right offset you need to find name.txt after giving your hard drive a label on the 360. The correct offset is at the multiple of 512 (0x200) below name.txt. e.g. my name.txt was found at 0x1381F0002, so the offset I need is at 0x1381F0000, because 0x1381F0000 is a multiple of 0x200.
0x means 'this is a hexadecimal number'. You can do hexadecimal calculations on windows calculator in 'programmer mode' which is in one of the menus, then you click the hex checkbox.