Topic: Xbox Backup Creator V2 (Read 2333 times)

Redline99 · « **Reply #30 on:** September 10, 2006, 11:40:00 AM »

cmart*- Do you have a log of that available? A log from the detail setting would be best. Thanks

emko · « **Reply #31 on:** September 10, 2006, 11:49:00 AM »

im gona go give this a try

piggymouth · « **Reply #32 on:** September 10, 2006, 11:54:00 AM »

I'm going to give this tool a try.

Is there any need to put the Sammy in 0800 mode anymore with this app..? Or do I just hook it up and boot directly into windows and start the backup process...?

I'm running the C4E v3.2 on my Sammy at the moment.

Thanks,

PM

Redline99 · « **Reply #33 on:** September 10, 2006, 12:04:00 PM »

you will need Sammy in 0800 for windows to not lockup during the boot process.

tidyD · « **Reply #34 on:** September 10, 2006, 12:27:00 PM »

hey guys, so does this just do it all in one go or do you still need to each thing 1st

Redline99 · « **Reply #35 on:** September 10, 2006, 12:05:00 PM »

tidyD - its not quite one step, its two. Read, then Write. but should be easy enough.

cmart* · « **Reply #36 on:** September 10, 2006, 12:16:00 PM »

QUOTE(Redline99 @ Sep 10 2006, 12:11 PM)

cmart*- Do you have a log of that available? A log from the detail setting would be best. Thanks

Starting write process...
Mode Parameter = Xbox 360
Checking Stealth Compatibility
Video is valid
PFI is valid
DMI is valid
Stealth Check Passed!
Data Sizes:
Total: 7.05 GB (7,572,881,408 bytes)
Creating Buffer: 20.0 MB
Prefilling buffer
Buffer Filled: 100% 20.0 MB (20,971,520 bytes)
Initializing Writer [D]
Unable to determine media capacity
Write failed

xboxexpert · « **Reply #37 on:** September 10, 2006, 01:11:00 PM »

QUOTE(Biosyntrix @ Sep 10 2006, 08:33 AM)

Upon launching the program.....
1st Error

Error Initializing ASPI or SPTI Interface.

2nd Error

91 Object variable or With block variable not set.
My SH-D162C is not detected by the program, however detected by Windows and other software.

Adaptec ASPI Drivers (Windows 98/Me/NT/2000/XP) 4.71.2

If you install that it will fix your 1st error. 2nd error might pertain to your first error.

This post has been edited by xboxexpert: Sep 10 2006, 08:14 PM

P8ntballer23 · « **Reply #38 on:** September 10, 2006, 01:22:00 PM »

Im running Windows 2000 and always get "uxtheme.dll not found" and then I download the DLL and put it everywhere that would make it work but still get this error 53..

This post has been edited by P8ntballer23: Sep 10 2006, 08:22 PM

Redline99 · « **Reply #39 on:** September 10, 2006, 01:34:00 PM »

P8ntballer23 - Thanks for the info, I'll have to fix that!

Some people report better ASPI support with the Nero ASPI driver.
http://ww2.nero.com/nero6/en/ASPI_Driver.html

put the wnaspi32.dll in the same folder as the application.

This post has been edited by Redline99: Sep 10 2006, 08:38 PM

swede67 · « **Reply #40 on:** September 10, 2006, 02:38:00 PM »

Thanks for the application and all your work. I have a suggestion for the name to avoid confusion - Xbox Backup Kreator or XBK. The acronym conveniently includes the abbreviation for back (BK). Just a thought....

THE CRAZY SHADOW · « **Reply #41 on:** September 10, 2006, 02:58:00 PM »

I think you have one of your "Hint" mis labled. I might be wrong so sorry if i am.

Under the image tab if you hover over Action > Extract, the hint is about merging and if you hover over megre its hint is about extract.

Nothing big just caught my eye.

hector7710 · « **Reply #42 on:** September 10, 2006, 03:17:00 PM »

On my Samsung SH-D152c the maximum read speed is 1.9x and and takes more than a half an hour to rip the xbox 360 disc. It used to rip them under 10 minutes. What can I do to speed up the drive? I have the speed boost option checked.

Heres a log:

Creating backup image [D]
Opening image output file
Processing Video Partition
Processing Filler Sectors
Inserting TAG information
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
Unlocking Game Partition
Processing Game Partition
Setting read speed to 0x10
Setting SH-D162C error mode to 0x01

Zil_Daggo · « **Reply #43 on:** September 10, 2006, 05:14:00 PM »

QUOTE

Zil_Daggo - I thought about that, maybe in a later release. I wanted to do on-the-fly read/write without ever going to the hard drive, but to do that the app need to be multi threaded, which sucks for VB6.

Yes but may I still advice that you take the 'cheap' way out and just use a temp file, at least have the option. Automation is always a nice feature. This would be relitivly easy to impliment, and could be a simple checkbox feature.

Also if you have a way to accept donations I would gladly send, again nice work.

This post has been edited by Zil_Daggo: Sep 11 2006, 12:15 AM

TurboJailer · « **Reply #44 on:** September 10, 2006, 05:02:00 PM »

QUOTE(TurboJailer @ Sep 10 2006, 03:31 AM)

Well I don't know what the hell just happened, but I checked create log file and selected detailed.....and it's working now.

You still want a copy of the log file now that it seems to be working?

Just an update. Seems the drive didn't play nice with my motherboard (ASUS A8N32 SLI-Deluxe). I took it out and put it in my Intel rig and it's working fine now.

Thanks for the awesome app. The GUI is nice and noob friendly!

Author Topic: Xbox Backup Creator V2 (Read 2333 times)