Print

[jazzbeam]

Well I have the Samsung on a firewire 5,25" connection, could it be this?

I couldnt find how to turn on dma for fw!?

Yes I have the Krypto 8 and the 2.1 version of your prog. -Which is great thx.

Could anyone offer me some advice?

Thank u in advance.

[jazzbeam]

QUOTE(jazzbeam @ Oct 9 2006, 09:43 PM)

Well I have the Samsung on a firewire 5,25" connection, could it be this?

I couldnt find how to turn on dma for fw!?

Yes I have the Krypto 8 and the 2.1 version of your prog. -Which is great thx.

Could anyone offer me some advice?

Thank u in advance.

I ment, now I have 0.81 and it still produces the 3,51 % error

[Redline99]

The Samsung SH-D162C seems to be real picky, especially when in an extrenal enclosure.  If you have an option, try USB 2.0.

111spider111 - I would love to have full support for the Hitachi.  I can currently Read Video, PFI, DMI, SS.  The problem comes in with the game partition.  I have not seen a Hitachi firmware that will allow reading the video, then unlocking to see the game data.  This would be my biggest request to Hitachi firmware hackers.

(by the way the new stealth firmware breaks some functionality in my app because of the nature of the stealth the app doesn't detect the firmwares features properly. It can be forced with a registry patch is needed, or I may come out with a small update.)

Before I release an update I would like more feed back on if the dvd writing has improved, gotten worse or stayed the same.

This post has been edited by Redline99: Oct 9 2006, 10:01 PM

[111spider111]

Red -

         Thank you for your reply.  I understand that you are just the builder not the architekt on all of this Hitachi BS.   I can only hope that a firmware does come out that can unleash the power of the Hitachi!!!   Ha Ha.  Keep up the good work.



Thanks,

111spider111

[jazzbeam]

QUOTE(Mister Scary @ Oct 9 2006, 06:20 PM)

Oops, sorry.  When I previewed the post I saw the image.  I'll try again.



Thank you.

Thx Redline, got it working twice, but I keep toasting and getting the same error as him!

Could you give me a hint?

Thx in advance, juls

[karlpowell]

Sorry to hijack im having a few problems as well

 i received my flashed samsung sh-d162 with 0.81 firmaware , i have it connected on IDE 2 as a master , and when i click read on xbox backup creator with any of my origenal games it asks were i want to put it so i select my slave drive on IDE 1.

All goes well untill it get to the security sector then i get this error (taken from the xbox back up creator log)

================================================== ==================
Xbox Backup Creator v2.1 Build:0175 By Redline99
Found ODD: DVD-ROM SH-D162C at [E] *
Additional Info: XB360 KREON V0.81
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive D:\ 36.3 GB (39,001,993,216 bytes)
Space needed 7.05 GB (7,572,883,456 bytes)
Creating backup image [E]
Opening image output file
Processing Video Partition
Processing Filler Sectors
Inserting TAG information
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
Action: Read Security Sector
Sense Error: 6 / 29 / 00
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
CDB: READ DVD STRUCTURE
0xAD 00 FF 02 FD FF FE 00 08 00 01 C0
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Read failed

this happens at 3.51% on each game i try to back up  

any ideas lads  

karl


PS great app

This post has been edited by karlpowell: Oct 12 2006, 08:04 AM

[Redline99]

jazzbeam - that is a known problem with some drives.  I will prob to a release this weekend to address it.

karlpowell - you have done some of this but I'll say it anyways.  Make sure the drive is the only device on the ide channel (nothing else connected on the same cable) Make sure the DMA is on.  If there are still problems, try using a different ide controller.  This drive seems to be real picky.  If the drive is external it will error more but best result are using usb 2.0.

good luck

[karlpowell]

thanks for taking time out to reply but im still having problems , i have made sure dma is enabled in the properties of the the channel , i have changed the registry for the dma and changed the ide channel (there is only 1 device on the channel with the samsung drive)


and i still get the same error


i will connect it via usb 2 and hope i get some better results


 thanks again
karl  

[moneypit]

Great tool - Thank You! Seems easy enough to rip and record but,

Is there a guide that details each tab and option for those of us not YET in the know ?

I've read the ReadMe and looked on this forum as well as XH. If I'm missing it posted somewhere (I've seen others request this as well), a quick link is greatly appreciated.

-

[woof811]

thanks mate for your excellent program !

at first i couldnt get it to work with my samsung DH-C162 ( kreon .81 ) , it would get to 3.5 % and stall with an error saying unable to get ss  ( security sector ).

so after reading this forum and scratching my head i went into device manager and uninstalled the samsung drive then re-started my pc and let it reinstall the samsung drive !

then i shut down a few programs that was working in the background and tried again , guess what viola it worked used xbox backup creator and schtrom 360 i can now rip a game without any errors in about 10 mins !

dont know which fixed the error for me uninstalling the samsung or shutting down programs in the background , but i have to say it now works 100 % of the time with any 360 game no probs .

the only thing i can think of is that maybe the samsung is a picky drive or software conflicts , having said that keep up the good work and alls well that ends well , woof811 .  

[sosotiit]

QUOTE

PLEASE NOTE THAT VERSION 2.3 WAS RELEASED AND IS AVAILABLE AT THE FORUM
X-S XBOX BACKUP CREATOR V2.3
Plse post any new questions in this thread