Topic: XeLL Reloaded 28/08/2011 '2Stages' (Read 576 times)

Xbox-Scene · « **on:** August 28, 2011, 04:53:00 PM »

XeLL Reloaded 28/08/2011 '2Stages'
Posted by XanTium | August 28 18:53 EST | News Category: Xbox360

Cancerous, [cOz], Ced2911, GliGli, RedLine99 and Tuxuser are proud to release today the first official version of XeLL-Reloaded (Codename: 2Stages) following the release of the new homebrew Xbox 360 reset glitch hack:

Quote

* Its divided in 2 stages:
- 1st Stage initalizes the Hardware, uncompresses and executes 2nd Stage
- 2nd Stage (based on LibXenon) loads all required drivers and does the usual "XeLL tasks"
* XeLL is based on LibXenon now
* XeLL is running with all CPU cores activated
* Optimized CPU Usage
* TinyEHCI is used, delivers full USB 2.0 speed when acccessing mass storage media
* lwip network stack upgraded to v1.4 rc2 - It's faster
* It can access the DVD-drive via DMA now: faster reading
* It's possible to reload into XeLL now when you are inside a LibXenon Application
* Refactored ELF Launching Code - shouldn't have issues when executed via XeLL-Launch
* New HTTP Webinterface
* Proper hardware init / shutdown (e.g. after XeLL Launch)
* Supports upgrading XeLL with a XeLL-2Stages binary from USB, named "updxell.bin"
* Infinite bootloop when looking for ELFs to execute
* Parses / decrypts keyvault (either with real or virtual CPUkey)

For now, there is still a little work to do on the nandflasher so this feature is disabled and a update will comes in the following weeks.
If you have a Jtag console, you can update XeLL with tuxuser's apps : XeLL Updater or LxNANDFlasher (Use at your own risks).

Official Site/Download: libxenon.org
News-Source: logic-sunrise.com

RRoD420 · « **Reply #1 on:** August 28, 2011, 06:16:00 PM »

Look what the Hurricane pushed in... the flood gate is open again, wait till the world sees this

EatonZ · « **Reply #2 on:** August 28, 2011, 06:24:00 PM »

Anyone know if this supports HDMI output?

I'dkickurass@cod2 · « **Reply #3 on:** August 28, 2011, 06:34:00 PM »

QUOTE(EatonZ @ Aug 28 2011, 07:24 PM)

Anyone know if this supports HDMI output?

Yes is does. Xell Reloaded was created for hdmi output. But my question is...is this better than xellous now? And if so, then my jtag is getting an update like... immediately!

krizalid · « **Reply #4 on:** August 28, 2011, 06:52:00 PM »

QUOTE(I'dkickurass@cod2 @ Aug 28 2011, 07:34 PM)

Yes is does. Xell Reloaded was created for hdmi output. But my question is...is this better than xellous now? And if so, then my jtag is getting an update like... immediately!

This new Xell does NOT have the updflash.bin flasher support... so if you plan to use it as 1 step to get CPU and flash final.. I don't recomend it, but for a fully finished nand, It shouldn't hurt

uN0pEn · « **Reply #5 on:** August 28, 2011, 06:55:00 PM »

Thanks!

I'dkickurass@cod2 · « **Reply #6 on:** August 28, 2011, 07:33:00 PM »

QUOTE(krizalid @ Aug 28 2011, 07:52 PM)

This new Xell does NOT have the updflash.bin flasher support... so if you plan to use it as 1 step to get CPU and flash final.. I don't recomend it, but for a fully finished nand, It shouldn't hurt

bummer. xellous it is then.

krizalid · « **Reply #7 on:** August 28, 2011, 07:50:00 PM »

for some reason my get's stuck after the:

TFTP: no answer from server, retrying

But it doesn't advance and I can't HTTP to XeLL Reloaded to see the web page...

This is on a Xenon using Freboot 0.32 Dash 13599 DashLaunch 2.23 .

Cheers

scuba156 · « **Reply #8 on:** August 29, 2011, 03:17:00 AM »

QUOTE(krizalid @ Aug 29 2011, 11:50 AM)

for some reason my get's stuck after the:

TFTP: no answer from server, retrying
But it doesn't advance and I can't HTTP to XeLL Reloaded to see the web page...

This is on a Xenon using Freboot 0.32 Dash 13599 DashLaunch 2.23 .

Cheers

I get the exact same thing, an elf is on the root of the usb stick which does not boot, the previous Xell Reloaded worked just fine with the exact same file structure

joliverio · « **Reply #9 on:** August 29, 2011, 01:22:00 PM »

QUOTE(krizalid @ Aug 29 2011, 09:50 AM)

for some reason my get's stuck after the:

TFTP: no answer from server, retrying
But it doesn't advance and I can't HTTP to XeLL Reloaded to see the web page...

This is on a Xenon using Freboot 0.32 Dash 13599 DashLaunch 2.23 .

Cheers (IMG:style_emoticons/default/jester.gif)

This hack does not work with Xenon motherboards, it only works with Hana chipset and Xenon have Ana chipset.

cancerous1 · « **Reply #10 on:** August 29, 2011, 01:36:00 PM »

xell should work fine on xenon's, people have been reporting that problem if run from xellLaunch instead of running from flash

jayboy86 · « **Reply #11 on:** September 01, 2011, 02:57:00 PM »

I updated to this latest xell and it sadly wouldnt run much, so i re-flashed it back to my nand i backed up before updating. guess ill have to wait for a new version

pudink · « **Reply #12 on:** September 03, 2011, 05:41:00 AM »

QUOTE(uN0pEn @ Aug 29 2011, 01:55 AM)

Thanks!

so lets see if i got it right,xellous is better cuz it can reflash the nand back to a previous version you have at hand.but this reloaded can not.Right?

and do you remember which version was the latest for xellous that supports hdmi output...

I see the importance of these kinda problems cuz I had messed up my jtag once and it helped me a lot.

pudink · « **Reply #13 on:** September 07, 2011, 04:00:00 AM »

QUOTE(pudink @ Sep 3 2011, 12:41 PM)

so lets see if i got it right,xellous is better cuz it can reflash the nand back to a previous version you have at hand.but this reloaded can not.Right?

and do you remember which version was the latest for xellous that supports hdmi output...

I see the importance of these kinda problems cuz I had messed up my jtag once and it helped me a lot.

anyone

Author Topic: XeLL Reloaded 28/08/2011 '2Stages' (Read 576 times)