Print

[majinsoftware]

You flash back the nand dump because it has all the xbox info still in it and xenon_1921_hack uses some of that info.
Yes dated 29th should be alright.

Flash xenon_1921_hack as you would the nand normally, It will only flash 50 blocks which will take like 5mins,
Then flash the updxell with 40 10 on the end and it will flash 9 blocks which will take about a min. Or you could just update with the usb stick with updxell on it. takes about 30secs.

[thc013]

don,t use the update option in xell

i broke my xbox till now

no poweron and my infectus2 don,t see the nand anymore get 8334 error as nand in infectus

got at least one option to power it external but i dont have the a822 error

[majinsoftware]

did you use -W cap W not small w.

[majinsoftware]

Just tested it on another xbox and you have to use cap W.

so

nandpro lpt: -W16 updxell.bin 40 10

[majinsoftware]

-w write with ecc
-W writes without ecc

Since your only patching it you dont want to have ecc added.

Or the other way around.
And im using a 20 inch CRT, dont have a way to record while Im flashing. Im using a really old 46mhz computer and it bearly runs windows 98 and the flasher program at the same time. So theres no hope for running a screen capture program.

[jayboy86]

i have a usb which i have been using for running the snes emulator and roms but for some reason trying to update via usb doesnt work. i renamed the file to updxell.bin but it doesnt work. any ideas?

[theevilhacker63]

QUOTE

majinsoftware     Posted Today, 09:18 AM
     -w write with ecc
-W writes without ecc

Since your only patching it you dont want to have ecc added.

Or the other way around.
And im using a 20 inch CRT, dont have a way to record while Im flashing. Im using a really old 46mhz computer and it bearly runs windows 98 and the flasher program at the same time. So theres no hope for running a screen capture program.

WOW !! I applaud you my friend.. 46mhz.. that brings me back! intel 386dx humming along at 16mhz.. and the trusty 486 with a whopping 33mhz...good old win 3.1 and dos days.. BBS FTW!

back when Netscape navigator was the default browser ... thanks for the memories!

I'm currently flashing with my trusty ibm thinkpad a22m 1ghz 256 megs ram.. coincidentally the only machine in the house that flashes correctly .

[RRODXbox]

Hmm, strange after turning the xbox off then putting the new SNES emu on the same stick it no longer finds it

Even when I put the update back on it to check it doesnt work?

Any ideas?

[thebigduk]

QUOTE(RRODXbox @ Sep 13 2009, 06:37 PM)

Hmm, strange after turning the xbox off then putting the new SNES emu on the same stick it no longer finds it

Even when I put the update back on it to check it doesnt work?

Any ideas?

Try switching your xbox off at the mains before retrying. My 360 does the same, doesnt detect the USB stick after powering off. A quick full power cycle does the trick. Just make sure you wait for the LED to go off on the PSU before powering back on.

Dan

[theevilhacker63]

QUOTE

majinsoftware Posted Today, 06:10 AM
Just tested it on another xbox and you have to use cap W.

so

nandpro lpt: -W16 updxell.bin 40 10

I can also confirm this is working just fine! thanks majinsoftware...

QUOTE

(RRODXbox @ Sep 13 2009, 06:37 PM)

Hmm, strange after turning the xbox off then putting the new SNES emu on the same stick it no longer finds it uhh.gif

Even when I put the update back on it to check it doesnt work?

Any ideas?

not sure what went wrong for you.. try flashing again may have a had a partially bad flash?

after this update I can also confirm that the usb update feature is now working just fine! and my snes emu is also working ..

 I'm using a sandisk cruzer micro 4gb looks like this http://www.missouris...tore/micro4.jpg

you can buy them in walmart for I believe 10 maybe 15 bucks now? I removed the "u3" partition instructions online on how to do that and it works perfectly!

[RRODXbox]

QUOTE(thebigduk @ Sep 13 2009, 06:56 PM)

Try switching your xbox off at the mains before retrying. My 360 does the same, doesnt detect the USB stick after powering off. A quick full power cycle does the trick. Just make sure you wait for the LED to go off on the PSU before powering back on.

Dan

Worked thanks, now my console has started RRODing ahahaha

[GOTitCUZiMODDED]

Turning off the console is what I had to do, thanks for the update!  Got this old 4GB stick I originally intended on using that works now and screen is nice and somewhat centered now!  Man, can't wait to see where this is headed!  Thanks!

[Hellzone]

QUOTE(majinsoftware @ Sep 13 2009, 03:18 PM)

-w write with ecc
-W writes without ecc

Since your only patching it you dont want to have ecc added.

Or the other way around.
And im using a 20 inch CRT, dont have a way to record while Im flashing. Im using a really old 46mhz computer and it bearly runs windows 98 and the flasher program at the same time. So theres no hope for running a screen capture program.

I confirm this works... i did it last night after understanding... lol
Finally my USB works and now the SNES emulator works (IMG:style_emoticons/default/smile.gif)
#1 problem is GFX errors...using snes

[theevilhacker63]

QUOTE

Hellzone     Posted Yesterday, 11:51 PM
I confirm this works... i did it last night after understanding... lol
Finally my USB works and now the SNES emulator works smile.gif
#1 problem is GFX errors...using snes

sorry...  GFX errors.??

I have played multiple games so far and seen no real errors no dropped frames nothing.. what game or games are you experiencing them on? or is it all games for you?

[geoffmac]

QUOTE(theevilhacker63 @ Sep 14 2009, 05:10 AM)

sorry...  GFX errors.??

I have played multiple games so far and seen no real errors no dropped frames nothing.. what game or games are you experiencing them on? or is it all games for you?

I also get 'GFX errors' screen tearing with snes9x, Im using VGA dont know if thats why.