Topic: Gentoo-xenon-minimal-2006.1 Livecd (Read 1392 times)

Cpas · « **Reply #30 on:** March 30, 2007, 04:32:00 PM »

This one need the serial to choose cd or tftp, so you can choose the delay. Say me if it work all the time with samy.

http://mydedibox.homelinux.com/downloads/x...l_choice.tar.gz

Cpas · « **Reply #31 on:** March 30, 2007, 04:27:00 PM »

And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva : ftp://linux360:[email protected] .

Dunno if it work.

capboy210 · « **Reply #32 on:** March 30, 2007, 05:28:00 PM »

Hah, laughs at samsung owners. I'm sure it is just a matter of time untill it will work on the samsung drive anyway.....

Big_Whoopin · « **Reply #33 on:** March 30, 2007, 05:38:00 PM »

Ok, I haven't seen this covered anywhere... do you need a HDD for this? I just picked up a pre-own 360 today, had one of the old kernels (2xxx) and a Hitachi DVD drive. No HDD was included, I figure it will be easy enough to get one once the 120's hit. Have updated it to the correct kernel for the exploit but still need to get in there and flash the DVD for media checks.

-Whoopin'

Cpas · « **Reply #34 on:** March 30, 2007, 08:26:00 PM »

QUOTE(Cpas @ Mar 31 2007, 12:34 AM)

And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva : ftp://linux360:[email protected] .

Dunno if it work.

Seems not working, dont waste dual dvd for now...

k0mpresd · « **Reply #35 on:** March 30, 2007, 10:47:00 PM »

QUOTE(capboy210 @ Mar 30 2007, 06:59 PM)

Hah, laughs at samsung owners. I'm sure it is just a matter of time untill it will work on the samsung drive anyway.....

mine works

its just kind of moody and takes 3 discs to accomplish instead of 2

kalle_19 · « **Reply #36 on:** March 31, 2007, 01:57:00 AM »

QUOTE(k0mpresd @ Mar 30 2007, 07:37 PM)

this did not work either

it still hangs in the same spot

it might be worth mentioning that i only leave the enable0800 cd in just until i hear the mode b "ticking" then i send the xell_rom.bin (from your site cpas (IMG:style_emoticons/default/wink.gif) ) and insert the gentoo cd @ the same time

if i leave the 0800 cd in for too long the system crashes and the xell loader isnt executed of course

will you please post or pm me the link to the xell loader w/ the delay for the enable0800? you posted it for warp on xboxhacker but neither one of my home computers will connect to the site ?

edit: i got it to work (IMG:style_emoticons/default/smile.gif) but will you still please send me the delayed xell? the time it takes the drive to go in to mode b is about the exact same time the box takes to crash

What's your md5 of "Enable0800.iso"? What media are you using, cd-r/rw dvd-r/rw?

kalle_19 · « **Reply #37 on:** March 31, 2007, 05:45:00 AM »

nvm, got it working, but it's a lottery every time.

Now it stops at: "Freeing unused kernel memory"

k0mpresd · « **Reply #38 on:** March 31, 2007, 07:09:00 AM »

QUOTE(kalle_19 @ Mar 31 2007, 07:16 AM)

nvm, got it working, but it's a lottery every time.

Now it stops at: "Freeing unused kernel memory"

lottery is a good way to put it

mine stopped in the same spot as well

k0mpresd · « **Reply #39 on:** March 31, 2007, 07:39:00 AM »

QUOTE(Cpas @ Mar 30 2007, 06:34 PM)

And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva : ftp://linux360:[email protected] .

Dunno if it work.

not sure why it needs to be burned to a dual layer ?

i burned this one to a cd

sent xell_rom.bin via serial and it hangs in the same spot..

QUOTE

[ 92.661818] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

so i would say confirmed not working

i will boot back to linux and try the other link you posted

XBHpringle · « **Reply #40 on:** March 31, 2007, 09:30:00 AM »

Sorry i'm late (IMG:style_emoticons/default/tongue.gif)

Confiming both xtreme 1 and 2 not working..
i just rushed trough the thread... i posted this in the kingkong exploit thread :

QUOTE

I'm looking intoo it....

i'm thinking about making a hardware switch for 2 different flashes,

flash nr.1 with a xtreme firmware to load the KK disc

flash nr.2 with a 0800 firmware to load the Livecd

In other words... removing a part from the xtreme firmware and switching to nr.2 just before the tray is popped to load the Livecd.

Who knows maybe it works

Or.. using two drives and use a simple SATA switch to switch between te xtreme and 0800 drive.

OOO fun things to do
Will post results this afternoon or night.. i'm kinda fckd from some btch aching my head

k0mpresd · « **Reply #41 on:** March 31, 2007, 09:05:00 AM »

it seems a lot easier to just buy a hitachi drve

k0mpresd · « **Reply #42 on:** March 31, 2007, 10:34:00 AM »

not sure how much more testing i can do

it seems my 2nd mobo has died a 0102 death

k0mpresd · « **Reply #43 on:** March 31, 2007, 11:49:00 AM »

QUOTE(k0mpresd @ Mar 31 2007, 12:41 PM)

not sure how much more testing i can do

it seems my 2nd mobo has died a 0102 death

heatgun'ed and back to working..wonder how long it will last

dolqube · « **Reply #44 on:** March 31, 2007, 01:19:00 PM »

Hi ive been loking at the samsung dvd drive problem and think i have came up with a solution.

put a 0800 enable disc and live cd on 1 disc.

the drive reads a certain sector and if that sector has a certain code it turns to 0800 mode.

why not just make the live cd and patch it so it is also an unlock disc.

(hope the sectors dont cross)

Do you think it is possible???

Author Topic: Gentoo-xenon-minimal-2006.1 Livecd (Read 1392 times)