Print

[woozzii]

Hi folks!

I have some problems with flashing my Box, and i'm really sick about it.
First! Sorry for my bad English and for the stupid queistions!

My specification (for the full sis info from my computer click here:
   
 

Xbox 360 Premium  Samsung-Toshiba TS-H943 ms25

 Computer:  
   Operating System   Microsoft Windows XP Media Center Edition  
   OS Service Pack   Service Pack 2  
   DirectX   4.09.00.0904 (DirectX 9.0c)  
   Computer Name   *****  
   User Name   ****
   
  Motherboard:  
   CPU Type   AMD Athlon XP, 1187 MHz (12.5 x 95)  
   Motherboard Name   ASRock K7Upgrade-600 (4 PCI, 2 AGP, 1 K8 Bridge Port, 2 DDR DIMM, Audio, LAN)  
   Motherboard Chipset   VIA VT8377 Apollo KT600  
   System Memory   768 MB (DDR SDRAM)  
   BIOS Type   AMI (01/07/05)  
   Communication Port   Communications Port (COM1)  
   Communication Port   ECP Printer Port (LPT1)  

 BIOS Properties:  
   Vendor   American Megatrends Inc.  
   Version   P1.30  
   Release Date   01/07/2005  
   Size   256 KB  
   Boot Devices   Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120  
   Capabilities   Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS  
   Supported Standards   DMI, APM, ACPI, ESCD, PnP  
   Expansion Capabilities   ISA, PCI, AGP, USB  

 System Properties:  
   Product   K7Upgrade-600  
   Version   1.0x  
   Serial Number   00000000  
   Wake-Up Type   Power Switch  

--------------------------------------------------------------------------------
 
 Chipset

  [ North Bridge: VIA VT8377 Apollo KT600 ]  
   
  North Bridge Properties:  
   North Bridge   VIA VT8377 Apollo KT600  
   Revision   80  
   Package Type   664 Pin HSBGA  
   Package Size   3.5 cm x 3.5 cm  
   Process Technology   0.22 um  
   Core Voltage   2.5 V  
   In-Order Queue Depth   4  
   
  Memory Controller:  
   Bank Interleave   4-way  
   
  Memory Timings:  
   CAS Latency (CL)   2.5T  
   RAS To CAS Delay (tRCD)   5T  
   RAS Precharge (tRP)   4T  
   RAS Active Time (tRAS)   9T  
   Command Rate (CR)   2T  
   
  Memory Slots:  
   DRAM Slot #1   256 MB (DDR SDRAM)  
   DRAM Slot #2   512 MB (DDR SDRAM)  
   
   AGP Controller:  
   AGP Version   3.05  
   AGP Status   Enabled  
   AGP Device   ATI Radeon 9600 XT (RV360)  
   AGP Aperture Size   64 MB  
   Supported AGP Speeds   1x, 2x, 4x, 8x  
   Current AGP Speed   8x  
   Fast-Write   Not Supported  
   Side Band Addressing   Supported, Enabled  
   
  Chipset Manufacturer:  
   Company Name   VIA Technologies, Inc.  
   Product Information   http://www.via.com.tw/en/products/chipsets  
   Driver Download   http://www.viaarena.com/?PageID=2  
   
 [ South Bridge: VIA VT8237 ]  
   
  South Bridge Properties:  
   South Bridge   VIA VT8237  
   Revision   00  
   Package Type   539 Pin BGA  
   Package Size   2.7 cm x 2.7 cm  
   Process Technology   0.22 um  
   Core Voltage   2.5 V  
   
  AC'97 Audio Controller:  
   Audio Controller Type   VIA 8233/8235/8237  
   Codec Name   C-Media CMI9739A/9761  
   Codec ID   434D4983h  
   S/PDIF Output   Not Supported  
   
  Chipset Manufacturer:  
   Company Name   VIA Technologies, Inc.  
   Product Information   http://www.via.com.tw/en/products/chipsets  
   Driver Download   http://www.viaarena.com/?PageID=2  


[ SCSI and RAID controllers / SCSI/RAID Host Controller ]
 
      Device Properties:
         Driver Description     SCSI/RAID Host Controller
         Hardware ID     ACPI\PNPA000
         PnP Device     Adaptec 154x-compatible Controller
 
      Device Resources:
         IRQ     09
         Port     FFE0-FFEF
 
   [ SCSI and RAID controllers / VIA SATA RAID Controller ]
 
      Device Properties:
         Driver Description     VIA SATA RAID Controller
         Driver Date     2005. 04. 08.
         Driver Version     5.1.2600.430
         Driver Provider     VIA Technologies, Inc.
         INF File     oem3.inf
         Hardware ID     PCI\VEN_1106&DEV_3149&SUBSYS_31491849&REV_80
         Location Information     PCI bus 0, device 15, function 0
         PCI Device     VIA VT8237 PCI-ISA Bridge - DriveStation SATA RAID Controller
 
      Device Resources:
         IRQ     20
         Port     D800-D8FF
         Port     DC00-DC0F
         Port     E000-E003
         Port     E400-E407
         Port     E800-E803
         Port     EC00-EC07




I'm tried this guides:
http://www.xbox-scene.com/xbox1data/sep/EE...FyprcUrLDTt.php
http://board.gulli.com/thread/627210-xbox-360-faq/
http://forums.afterdawn.com/thread_view.cfm/348557
http://www.xbox-inf.org/article-2487-thread-0-0.html

Here is a few of my probs:

1.)
I created a boot floppy. then i copied these files: MTKFLASH.EXE, MTKFLASH.TYP, XTREME.BIN, XTRM0800.BIN.
I turned of the computer.
I connected off every IDE cable from the HDD/DVD on my computer (not from the motherboard)
I connected the SATA cabel in SATA1 on my pc, but not to the xbox.
I turned on my pc, and on the promt i write:  mtkflash r/m orig.bin   (also tried : r/sata/m and r/m sata)
then i connected my pc to xbox's driver with SATA, video cable is still in driver.
I turned Xbox on, counting 10-20 sec, end pressed enter.
Then i got the message: "No device detected"
And thats is it, i can nothing do.

2.)
I created a boot floppy. then i copied these files: MTKFLASH.EXE, MTKFLASH.TYP, XTREME.BIN, XTRM0800.BIN.
I turned of the computer.
I connected off every IDE cable from the HDD/DVD on my computer (not from the motherboard)
I connected the SATA cabel in SATA1 on my pc, but not to the xbox.
I turned on my pc, and on the promt i write:  mtkflash r/m orig.bin   (also tried : r/sata/m and r/m sata)
then i connected my pc to xbox's driver with SATA, video cable is still in driver.
I turned Xbox on, counting 10-20 sec, end pressed enter.
When the pc says: "Please wait" -> I turned the xbox off. I waited 10 sec and turned on.
Still i got the message: "No device detected"

3.)
I created a boot floppy and i copied all files from X360SAM.6 folder to this floppy (including
xtreme42a and (IMG:style_emoticons/default/cool.gif)
I turned off the computer.
I connected off every IDE cable from the HDD/DVD on my computer (not from the motherboard)
I connected the SATA cabel in SATA1 on my pc, but not to the xbox.
I turned on my pc, and on the promt i write:  mtkflash r/m orig.bin   (also tried : r/sata/m and r/m sata)
then i connected my pc to xbox's driver with SATA, video cable is still in driver.
I turned Xbox on, counting 10-20 sec, end pressed enter.
I got this long message:

    MTKFLASH by Joseph Lin, MTK 1998 (Ver 1.830)
    please wait....
    Port: e400, Master/Slave: a0
    Flashtype: "SSTCSST399F020)"
    ERR: fail to open input file!

Then i pressed ESC, i got a message that something is 80 should 70
And thats it.

I also tried every version, so that the xbox is power on, when i turned the pc on.

I dont no whats is wrong. I think MTKFLASH support my VIA VT8377 Apollo KT600, but i can be wrong.

Please when someone know something, help me! Many thanks, and sorry for my English!
(I have not read every topic, and every page so if somebody post the same, then sorry for this too)

My email, and MSN: [email protected]

Thanks!

[majik655]

Sorry I just could not read that whole thing...  I see you have a via chipset.


Did you modify the mtkflash ?    you HAVE to to use it.

Xtreme boot maker I believe will make a MODIFIED MTKFLASH for you ... then USE THAT in place of the one you download.

then try what you were trying before.

And use this tutorial  it tells  you everything you need in it..
TEXTBOOKS GEEBEES TUTORIAL PDF

This post has been edited by majik655: Dec 4 2006, 01:25 AM