Topic: Does Xell Working Mean A Successfull Install? (Read 144 times)

jamsplodge · « **on:** February 14, 2010, 04:38:00 PM »

Xell wouldn't boot without JTAG wires hooked up correctly. There must be something wrong with your flashes.

Giganticube · « **Reply #1 on:** February 15, 2010, 01:38:00 AM »

Do the rebooters need a specific point to point with the jtag, or does xell/xbr/freeboot use every wire of the jtag to work. What about the notorious RB? Im trying to decipher whether or not its hardware/software before I open it up and pull the tape off the points and resolder!
Do I need to use the SMC / KV injector in the Cygnos toolbox or not?

zane78219 · « **Reply #2 on:** February 17, 2010, 07:52:00 PM »

If xell is booting ur jtag wires are fine. I do belive tho that xell will boot without having the proper KV data injected into it so that could be your problem.

jhonnypolak · « **Reply #3 on:** February 23, 2010, 05:15:00 AM »

your smc is wrong.

if you're using xbr, pull down xell_jasper16.bin from xbins or Cygnos360 V2 XeLL Images Collection.zip

and follow this tutorial:

http://www.xboxhacke...g95979#msg95979

Author Topic: Does Xell Working Mean A Successfull Install? (Read 144 times)