xboxscene.org forums

Author Topic: Programming A Matrix Glitcher With Jrp V2 Ofr Falcon Rgh 1.2 (Pics)  (Read 720 times)

Klu

  • Archived User
  • Newbie
  • *
  • Posts: 1
Programming A Matrix Glitcher With Jrp V2 Ofr Falcon Rgh 1.2 (Pics)
« on: March 11, 2016, 09:59:00 AM »
Matrix v2 are preprogrammed chips just like cr4 and timing files are adjusted with dips I believe. Get a v1 or v3 for 1.2 or simply follow the rgh 2 diagram for the v2
Logged

gilehmke03

  • Archived User
  • Newbie
  • *
  • Posts: 2
Programming A Matrix Glitcher With Jrp V2 Ofr Falcon Rgh 1.2 (Pics)
« Reply #1 on: March 26, 2016, 02:12:00 PM »

I have a coolrunner rev c now hooked up rgh 1.2 but everytime I hook up the clk point, the system wont power on. Red light is on the coolrunner but now power to console. I can remove the clk point and the system will power on but the green light will blink every couple seconds. glitch does not work though. Please help.

http://imgur.com/a/l0t3O

Logged

gilehmke03

  • Archived User
  • Newbie
  • *
  • Posts: 2
Programming A Matrix Glitcher With Jrp V2 Ofr Falcon Rgh 1.2 (Pics)
« Reply #2 on: March 27, 2016, 05:04:00 PM »

Just to update everyone. Got 1 falcon finished and I did not remove the resistor to disable the osicllator. Once I removed that and "jp", timing file 18 was an instaboot. Now got a new questions. Back to the matrix v3. I posted pictures of the install. I believed I disabled the oscillator but I am not sure as all pictures I found were to different versions and not the one I have. I removed a resistor closed to it and placed clk to the point in the pic. I am not sure if this is even correct but I wanted to try and see if it worked. Of course, nottttt... Thanks for anytime spent already guys and I am learning a whole lot about the rgh hack now. Still gotta get little inks like this fixed though.

http://imgur.com/a/a3qu0

Logged