xboxscene.org forums

Author Topic: [benq] Regarding The Flashing Of Lt 3.0  (Read 188 times)

steveo1978

  • Recovered User
  • Hero Member
  • *
  • Posts: 998
[benq] Regarding The Flashing Of Lt 3.0
« on: March 04, 2013, 08:00:00 PM »
Did you dump the firmware from the benq and make sure it was not spoofed before you tried to update or at least to see what firmware it was actually on?
Logged

playafolife6

  • Archived User
  • Newbie
  • *
  • Posts: 1
[benq] Regarding The Flashing Of Lt 3.0
« Reply #1 on: March 24, 2013, 08:27:00 AM »
QUOTE(steveo1978 @ Mar 4 2013, 11:00 PM) View Post

Did you dump the firmware from the benq and make sure it was not spoofed before you tried to update or at least to see what firmware it was actually on?


I dumped the firmware and used it as my source then spoofed the new ixtreme with it!
Logged

wilgo45

  • Archived User
  • Sr. Member
  • *
  • Posts: 475
[benq] Regarding The Flashing Of Lt 3.0
« Reply #2 on: March 25, 2013, 05:43:00 PM »
I'm thinking this is how you should have done it

First ... do an initial read.  Get the bin and drive key

Second .... write the drive back to stock.  If you have JungleFlasher, then you have the stock files for Benq.

Third ... update the console with the new dashboard.

Fourth .... Flash LT 3.0 into the drive.

To get past your E66; I'd start at number 2 on my list and work your way down.

Maybe that will help
Logged

ozzy_paul

  • Archived User
  • Newbie
  • *
  • Posts: 34
[benq] Regarding The Flashing Of Lt 3.0
« Reply #3 on: April 08, 2013, 02:16:00 AM »
I had the same issue last week with my benq. I did all the same things as you and resulted with the same error aswell. I forgot my benq was spoofed as a liteon. I put lt3.0 on a liteon and put her back in the unit and all is good.
Logged