help! I have been trying for hours on end to flash my chip inside my 1.2/1.3 xbox. The chip is an st chip and it says m29f002bt70n1. I have entered multiple device ids in my raincoat.conf file . Heres what i put in so far:
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0x20b0,"ST M29f002BT",0x40000
Flash = 0x01da,"AMD - Am29LV800B - Xodus/Chameleon 4x256",0x100000
Flash = 0x20B0,"ST 29F002",0x40000
Flash = 0xda8c,"ST W49F020T",0x40000
Flash = 0x20B0,"UNKOWN CHIP",0x40000
Flash = 0x20B0,"ST M29F002002BT",0x40000
Flash = 0x20B0,"ST M29F002BT",0x40000
Flash = 0x20b0,"ST - M29F002BT",0x40000
Flash = 0x20b0,"ST M29f002BT",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x20b0,"ST - 29F002",0x40000
and i get an unkown device error manf=0x20, def=0x60 try adding device in raincoat.conf file.
Any suggestions? I have soldered the 2 ponts on the top of the motherboard and have tried this and it doesnt work. I have also tried this with 2 points on top and 1 on bottom and 2 points on top and 2 on bottom. Im out of ideas guys. Please help!!!