xboxscene.org forums

OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: AFNinja on July 10, 2003, 08:19:00 AM

Title: V1.1 Sharp Solder Points
Post by: AFNinja on July 10, 2003, 08:19:00 AM

O.K.  I have a V1.1 with a sharp and have been looking for about three hours trying to find out where this third jumper is.  I have found plenty of pics that show the first two, but have yet to find any to show me the third.  This is my first sharp and I'm a little confused.  Yes I have done about fifty searches now and still haven't found what I need.  If anyone can help I would be in your debt.

Title: V1.1 Sharp Solder Points
Post by: Frag Daddy on July 10, 2003, 09:20:00 AM

Here ya go:

http://xbox-scene.co...ix-fix-tsop.php

5th pic down.

Title: V1.1 Sharp Solder Points
Post by: AFNinja on July 10, 2003, 08:30:00 AM

Your the man!

Title: V1.1 Sharp Solder Points
Post by: Frag Daddy on July 10, 2003, 08:33:00 AM

I'm glad I could help.  Let us know how it turns out.

Title: V1.1 Sharp Solder Points
Post by: cribby08 on July 10, 2003, 08:40:00 AM

Remeber to flash sharp tsop you have cannot have all the all 3 points soldered to boot your xbox the first time when doing the 007 hack. It doesnt tell you that one the tutorial.

If you have done this already you will know what I mean

Title: V1.1 Sharp Solder Points
Post by: AFNinja on July 10, 2003, 10:14:00 AM

Thanks you guys.  Flash went perfect.  Absolutly no problems.

Title: V1.1 Sharp Solder Points
Post by: Frag Daddy on July 10, 2003, 10:14:00 AM

Great to hear!!

Title: V1.1 Sharp Solder Points
Post by: naughtsmart on July 12, 2003, 12:09:00 AM

I have the sharp TSOPS but i don't understand what this means:

QUOTE

Remeber to flash sharp tsop you have cannot have all the all 3 points soldered to boot your xbox the first time when doing the 007 hack. It doesnt tell you that one the tutorial.

does it mean i should only solder the top side and run the wire?

Title: V1.1 Sharp Solder Points
Post by: crazymike000 on July 12, 2003, 05:16:00 PM

yes i was also wondering what that means does it mean you dont connect that wire on the back?

Title: V1.1 Sharp Solder Points
Post by: iLLNESS on July 12, 2003, 08:23:00 PM

what it means is solder the bottom 2 jumpers


then use a wire to solder the 3rd
boot the xbox with the top one not joined

then join it.. flash it and unjoij it


depending on the bios u flash with u dopnt nmeed to have the top one unjoined when u boot the xbox

Title: V1.1 Sharp Solder Points
Post by: Fostbarr on August 04, 2003, 07:46:00 AM

If you have all 3 soldered then the xbox will not boot up right.
And also when you say after the bios is flashed disconnect the top one or the wire?

Title: V1.1 Sharp Solder Points
Post by: polarz on August 04, 2003, 01:13:00 PM

QUOTE

And also when you say after the bios is flashed disconnect the top one or the wire?

the top one

Title: V1.1 Sharp Solder Points
Post by: Fostbarr on August 04, 2003, 09:51:00 PM

Quote

boot the xbox with the top one not joined

then join it.. flash it and unjoij it

does this mean that i am supposed to solder the top jumper when the system is on?

Plz reply ASAP

Title: V1.1 Sharp Solder Points
Post by: polarz on August 05, 2003, 12:40:00 PM

QUOTE

does this mean that i am supposed to solder the top jumper when the system is on?

yes

It's been a while since I've done a sharp tsop but I do remember doing some soldering with the box on.

Title: V1.1 Sharp Solder Points
Post by: blueinfinity on September 15, 2003, 09:58:00 PM

lol just sodler one point.. the larger. and boot the xbox. prep it and then before clicking program hold the wire in place then click away... easy

Title: V1.1 Sharp Solder Points
Post by: chadkeck on September 16, 2003, 05:25:00 PM

Ok so I went to flash the sharp tsop and it wouldn't boot (no video output and no dvd eject).  So then i read this thread and unjoined the top.  IT BOOTED!  So I successfully flashed it with raincoat and the Auf hack (just like i've done on all other xboxes).  It said it was fine and the flash was successful.  But then i goto boot again and i get the christmas lights of death.  So I unjoin the top.  Same thing.  So i take off the wire on the bottom... same thing.

What should i do?  Should i unjoin the bottom jumper also?  Its a friends xbox and I need to know how to fix this?  I know the bios was good on raincoat cuz i've used it many times before.

 

Title: V1.1 Sharp Solder Points
Post by: polarz on September 17, 2003, 06:43:00 AM

QUOTE

So I unjoin the top. Same thing. So i take off the wire on the bottom... same thing. What should i do? Should i unjoin the bottom jumper also?

What bottom jumper did you solder. It's been a while since I've done a 1.1 sharp but I'm almost positive I only connected the 2 points on the bottom with the wire. If you joined an extra 2 points other than the wire remove that bridge. I also left the wire on the bottom connected, though I doubt removing it would cause you problems.