Post by: mtrf on April 04, 2013, 10:40:00 AM
Was a lot of hard to get it working since the problems with the launch and Joy2key files... here they are ready to play tag battles controlling both chars by the players -no CPU using the second char- (PS: these builds don't include any char/stage at all !!! So please add at last one char and one stage to test it first).
One is the typical Xmugen version for E partition:
https://dl.dropbox.c...on-with-TAG.rar
remember: put the mugen folder and the linuxboot file in the E partition.
The other is for the F partition, so you can get larger Mugen games/compilations in your HDD. As you can see, here there's a folder with a swapfile of about 500MB ; if you install more of one xmugen game "F" version, you don't need to copy again the swapfile folder; same, you can install more "xmugen F" versions in the E folder and no need to copy the swapfile again (remember, for getting more of one mugen installed, you must rename the folder with other title. Example: E folder: mugenmk, mugensf, mugenmvc... when you'll use one of them, rename it as "mugen" -in the E partition- or "xmugen" in the F partition). The F version works on my Xbox putting it on the F/Games folder, so I inclueded it here in that way, but if it doesn't work in there, replace the contenct of F/Games to F/Emulators (in other words: 1.- can be F/Games/xmugen or 2.- F/Emulators/xmugen).
https://dl.dropbox.c...on-with-TAG.rar
and... I disabled some game modes. If you wanna activate them, edit the system.def file putting beetween " symbols the game mode you want to enable. Example : versus.mode = "VERSUS".
Now, how the tag team works:
Play in a simultaneos team mode. When the round begins, hold pressing in the first controller L3, then R trigger; for P2, only press R trigger (P1 must pressing L3 while). You can do this at the first seconds after the match begins. Test if the team tag worked before playing relaxy
. Be careful in don't touching the right analog stick in the match !!!As an additional note, I disable the shadows for saving memory for play fluenty as possible.
Cheers !!!
PS: If you don't want to tag at all and wanna use the F partition build, just replace the 2 joy2key and launch files from a typical xmugen build.
Post by: xXR4V3NXx on October 08, 2014, 11:51:00 AM
Wow super Old Thread! RXMugen V2 has Arrived!
Post by: guybird on February 26, 2006, 09:17:00 AM
Revisions/Updates
Introduction
Questions
Step 1: Gather the files needed for xmugen.
Step 2: Set up xmugen on the Xbox.
Step 3: Configure your Characters/Stages/Screenpacks.
Step 4: Configure xmugen to run smoothly on your Xbox.
Step 5: Playing xmugen.
Credits
Revisions/Updates
Feb 26, 2006 - Initial release
Mar 05, 2006 - Updated with Alg's newest updates, referenced Sludge's Xmugen Renamer, etc.
Mar 26, 2006 - Updated with Alg's newest updates, added section on running from CD/DVD.
Introduction
Q: What is Mugen?
A: M.U.G.E.N is a 2D fighting game engine designed by Elecbyte starting in 1999 using the Allegro game programming library. Elecbyte distributed beta versions that ran under DOS, Linux, and Windows. The engine allows for anyone to create characters, stages, and other game objects through interpreted text files and graphics and sound compilations, and it also supports MP3 background music during gameplay. The engine is very powerful and flexible, allowing for the same type of functionality found in most any commercial 2D fighting game, such as the Street Fighter games produced by Capcom or the King of Fighters games produced by SNK.
More info about M.U.G.E.M here.
Q: What can you do in Mugen?
A: Mugen is a very robust engine that allows you to use characters from virtually any game, even original characters that have never been created before. It also allows for 2 on 2 simultaneous battles. This in my opinion is the bread and butter of Mugen. Also with this engine you can play out the matches youve always dreamed of. Ryu vs Scorpion? Check. Wolverine vs Fulgore? Check. Evil Ryu & Evil Ken vs SSJ3 Broli and a uber M. Bison? Check. Its all possible as long as the characters have been created (and for the most part, most popular games have been ripped) or you feel like creating the character yourself.
XMugen-linux (more commonly referred to as xmugen, as the Windows mugen is referred to as winmugen, or Linux Mugen as linmugen) is a port of linmugen to Xbox by Alg5. Alg5 compiled a bare bones linux kernel based on XDSL. Since it is based off of linmugen, there are some compatibility issues with winmugen and dosmugen files running in it. So depending on your luck, you may or may not have to do a lot of configuring to get your characters/stages/screenpacks running. As xmugen is such a picky program, if there are any misconfigurations in the character select screens, character files, or stage files, it will either freeze at the versus screen (usually a memory issue but not always) or it might error out to the linux kernel that is running in the background. With this in mind, and the sheer size that the XMugen-linux Beta v0.1 thread has grown to, I thought that it would be best to have a FAQ thread that people could easily look to for answers.
Considering that Xmugen-linux is a combination of a running Linux kernel and linmugen, there have been a lot of tweaks and updates released. There are different tweaks for Linux which is quickly becoming a popular subject due to xmugen and the success of epsxe. There are also many mugen specific tweaks which can normally be found on mugen specific sites, and I am trying to contain all of the data needed to get xmugen running well.
Please keep posts in this thread limited to issues getting xmugen running. Obviously the demand for xmugen is growing very large, which is no surprise as it is a great program, but lets try to keep this as a reference thread and keep general mugen discussion in another thread.
Step 1: Gather the files needed for xmugen.
Required files needed for XMugen to run properly:
Updated XMugen-linuxb3 distro (V3 with Alg's newest irdloop). By Alg5
Download here: http://rapidshare.de/files/16472771/Update...inuxb3.rar.html
NOTE: If using this new distro, you MUST modify your linuxboot.cfg and change the line reference to ird-loop.gz to irdloop.gz as that file has been renamed for compatibility.
Additional files for use with XMugen:
XMugen Renamer v1.3. By Sludge
Download here: http://xmugen.forumsplace.com/urljump.php?...com/?d=RHQN8HGV
Dos2win character converter (does just as it says, and chances are you'll run into a dos character sooner or later).
Download here: http://youngcity.ath.cx//modules/sections/..._utilitaire.php
EVE screenpack (note this uses a lot of memory). By r1sky
Download here: http://rapidshare.de/files/13911760/EVEBat...Xmugen.rar.html
Minimal resources EVE screenpack. By r1sky
Download here: http://rapidshare.de/files/14233527/minimal_v1-risk.rar.html
Marvel VS Capcom 2 screenpack. By r1sky
Download here: http://rapidshare.de/files/14126030/MvC2_56slot.rar.html
Capcom VS SNK screenpack. By r1sky
Download here: http://rapidshare.de/files/14133512/cvspro_sc.rar.html
Character, Stages, and Screenpack files:
Here is a list of some Mugen specific sites, and is intended to give you a head start:
http://www.mugenguild.com/forumx/
http://forum.mgbr.net/
http://www.geocities.jp/warusaki3/
http://tinshiva.hp.infoseek.co.jp/index.html
http://conversion.wo.to/
http://fanaticmugen.free.fr/index_eng.php
http://sander71113.mgbr.net/mugen.html
http://www.mugenguild.net/~pots/
http://tkof2k2.free.fr/byakko/
http://projectm.mgbr.net/index.html
http://www.streetmugen.com/mugen-us.html
http://sp-vega.hp.infoseek.co.jp/index.html
http://randomselect.i-xcell.com/
Step 2: Set up Xmugen on the Xbox.
With Alg5's latest release, you can set up your main mugen on your E, F, & G partitions, or run from a CD/DVD (more on this in the next paragraph). Make sure that the folder remains called "mugen" not "Mugen" and is put into the root of whichever partition you choose (E/mugen/ , F/mugen/ , G/mugen/). The bzimage & irdloop.gz must go into E/mugen/ regardless of where your other mugen folder is. The linuxboot.cfg must also go into the root of your E partition. Make another mugen folder under either Apps, Emulators or Games (your choice, although Id toss it under Emulators as I keep the Games section for just Xbox games). Copy the default.xbe into it as this is just the launcher that you will use to run xmugen.
To run from a CD/DVD, you'll have to make a few minor changes. First in your burning program, select UDF/ISO as your disc's format. Edit the launch file (using notepad or simliar program) and modify this line:
#!/static/ash sleep 7 ./mugen & sleep 1 ./joy2key1 & ./joy2key2 &
to this:
#!/static/ash sleep 7 ./mugen & sleep 10 ./joy2key1 & ./joy2key2 &
Make absolutley sure that you don't copy and paste the previous line into your launch file as it WILL NOT WORK, it must be manually typed in (only 1 number so not that difficult).
Once you've done that, layout your files on the CD/DVD like this:
/root/
linuxboot.cfg
default.xbe
/mugen/
Next you'll want to configure your linuxboot.cfg to work with your tv. If you're not using a HDTV, then your existing config should work fine. If you are using an HDTV, you'll probably want to set it to use either 480p or 720p (note if you have a 1.6 box, you can only run 480p). To set it for 480p or 720p, simply change video=xbox:640x480 to video=xbox:480p or video=xbox:720p in linuxboot.cfg. Some people have reported that the Gentoox loader screen (the first screen shown after launching the mugen default.xbe) will either not display or look garbled if they do not have 720p or 1080i enabled in their dash. Also of note is that if youre using the HD pack with your xbox and using fiber optic output, that xmugen will not output digital sound. So you will need to hook up the analog audio cables as well, and have your receiver switch to analog input when using xmugen (theres a chance this might be fixed in the future, but dont hold your breath).
Step 3: Configure your Characters/Stages/Screenpacks.
This is where most of your time with xmugen will be spent: Configuring. As Linux is CasE sEnsTive, you'll want to rename all of your folders and files to lowercase. Some people that are like me that prefer capitalizing everything might find this difficult, but trust me, it'll make your life much easier in the long run. Xmugen is also sensitive to backslashes (\). You must replace all \ with / otherwise xmugen will crash. I would HIGHLY recommend using Sludge's Xmugen Renamer. All you have to do is point it to your character/stages folder, scan it, and then select all and fix. It will automatically rename folders, files, and the references to files in the def files. It will also fix numerous other discrepancies that can cause your mugen to crash. Do this for all of your characters and stages. You'll have to do your screenpacks manually for now.
NOTE: The following section is NOT necessary if you're using Sludge's Xmugen Renamer. I'm leaving it here for reference only.
Once that's done, you should start editing the .def files for each character, stage & screenpack. Once again you can use a batch file editor (one that can open files and edit them internally) or do them manually. Rename every instance of a file that is being referenced to lowercase. Although I'd love to let a program fix everything for me automatically, I prefer to do this part manually as I like to have the display name remain capitalized (SFA M. Bison looks better to me than sfa m. bison).
Here are some specific things to look for in a character's def file:
Version dates should NEVER have strings.
versiondate = 06,16,2002
mugenversion = 04,14,2001
The code above is the only accepted syntax. NONE ELSE.
The same for pal defaults. only 1-12 values are allowed, delimited by commas. Other values will cause the crash!
pal.defaults = 4,5,6,1,2,3
Character intros/endings should either be pointing to an existing file or if one does not exist, comment it out (put a ; in front of the line of code).
Please know that this will account for pretty much all of the problems you will have with xmugen. Any other problems will be related to incompatibilities with linmugen. I've had xmugen lock up with fonts, sprites and sounds from winmugen made packs. If anyone has any specifics on what isn't compatible, let me know.
Once you've renamed all of your files and edited your .def files, you need to start putting all of your characters and stages into your select.def. Decide what screenpack you want to use, and open up the select.def in that screenpacks folder. Depending which screenpack you use, there should be placeholders for where your characters should go. They typically are randomselect or (insert character here). There should be an example of the syntax required for characters/stages being inputted at the beginning of the characters section. Basically you will insert the following:
Location of character's .def file, location of stage .def file, character's order
Example:
Hacks/evil ryu/evil ryu.def, stages/sfa3 akuma.def, order=9
Now for your stages. Find the stages section, and insert your stages.
Example:
stages/cvss2_london.def
Some crashes occur when the stage.def file has "bgmusic = sound/". It will crash mugen if it has "sound/" so either put a song there (bgmusic = sound/music.mp3) or remove the entry by commenting it out.
As always, the file locations are case sensitive, so make sure they are all lowercase if you followed my advice. Note: I realize that my Hacks folder is capitalized. I sort all of my characters by the game/type of character they are from. Although I leave all of my character folders and files lowercase, I capitalize the game folders (just looks better as SFA, KOF or MVC than sfa, kof or mvc).
There is a bug in Mugen that if you either don't have one, or if you have random assigned to your characters in the select.def, mugen will give an error and crash when you continue in Arcade mode. To do a "mass" assignment, I copied a stage I had and renamed it to "random.def". I then did a replace all, and replaced all instances of "random" with "random.def". That way every character has a stage assigned, and you can then go back through at your leisure and assign individual stages to them.
Also of note is the character's order. This will determine in what order you face opponents in arcade mode. The order goes 0-10. Zero isn't used by the AI, so assign this to characters that are extremely cheap (Psycho shredder?) or too small to fight against. So assign weak/crappy AI characters to 1-3 (nice for a little warm up), normal characters to 4-7 (the bulk of your arcade mode), and then your super hacked and insane AI characters to 7-10. I tend to put the Spec Ops, most uber DBZ characters (Nightmare Brolli) and Evil Ryu & Evil Ken to either 9 or 10. At the bottom of the select.def is a section that contains arcade.maxmatches= & team.maxmatches=. Going from left to right is the number of times you'll fight a character with an order of 1, 2, 3, and so on.
Example:
arcade.maxmatches=1,1,2,3,1,2,2,2,2,1
team.maxmatches=1,1,1,1,1,2,2,2,2,1
In Arcade mode, this will make you play 1 order 1 character, 1 order 2 character, 2 order 3 characters, 3 order 4 characters and so on.
To set your xmugen to run your selected screenpack, you need to go to /mugen/data/ and edit mugen.cfg. Find a line near the top that says motif. Edit this line to point to your screenpacks system.def. Once you've gotten all of your characters, stages, and screenpacks squared away, I'd highly suggest trying them out on linmugen on your pc (if you can/are running linux on your pc) or winmugen (winmugen isn't case sensitive so you can't test that this way). As there is no IGR in Xmugen, once it locks up you'll have to manually restart, so debugging this way can be very time consuming and annoying. Make sure every character & stage works. If you get any errors, make sure to try to correct them or move them to a "not working" folder until you can fix them. Also remove them from your select.def. Once you're satisfied that your setup works, copy it to your xbox (characters into the chars folder, stages into the stages folder, etc).
Step 4: Configure Xmugen to run smoothly on your Xbox.
This section is not an exact science as there is a lot of different things going on with everyone's setup. Different characters, stages, screenpacks, 64mb of ram, 128mb of ram; it all differs for everyone. So while one setting might work for some, it might not work for another. You'll have to tinker around and see what works best for you. Below I'll go through the mugen.cfg settings and point out which ones will make a difference in your game speed. My settings below are set more towards 2 on 2 team mode (the best way to play on Mugen) and will make 1 on 1 matches run much much faster. I'd recommend trying them out for yourself, and see how you like them, then tweak from there.
;Set to 1 to run at maximum speed by default.
Speedup = 1 ; This will force Mugen to run at its fastest possible speed at all times. So this can vary from super fast to normal as the situation changes (size of stages, number of characters)
[Video]
Change Depth = 32 to Depth = 16
Now find FullScreen = 0 and change it to FullScreen = 1 ;Changing these two will eliminate the need to push in the L3 button when Xmugen boots.
DoubleRes=0 ; Although it looks better turned on, this is a huge memory hog, and I'd rather play 2 on 2 smoothly than have it look better
VRetrace = 0 ; Big memory hog
Once you set those, mugen at the normal game speed under options, will run at about 115-120% speed, even with 2 on 2. So you'll then want to turn up the settings on anything else to counter the ungodly speed boost you'll get. Note, turning up any of the previous settings WILL make it run slowly again, whereas the following settings don't seem to really slow down my xbox at all.
[Config]
DrawShadows = 1 ;I turn this on to counter the speed boost
[Misc]
PlayerCache = 4 ;I turn this up to counter the speed boost, plus it speeds up the loading times
Precache = 6
BufferedRead = 1
UnloadSystem = 1
If you set everything like I have it, your mugen will run at about 120% speed in a 1 on 1 match. To counter this, simply go to options, and turn down the game speed to one of the slow settings. For Team matches, you'll want to have the game speed set to normal, or fast. This allows for you to tweak within your mugen without having to edit the cfg file, so I find this a much better option.
If you all want to see what frame rates your getting, edit mugen.cfg and change Debug = 0 to Debug = 1.
Alg's newest joy2key has fixed all of the bugs with 2 player support, so I have removed the old 2 player hack. However, he has not implemented F2 button support to configure controller 2, so unless you have a usb keyboard, you will not be able to modify it. I will post my button config below, and if you don't have a keyboard and would like a specific layout, PM me and I will make one for you and post it for others to use.
This layout assigns the buttons as follows:
A = LK
B = HK
X = LP
Y = HP
WHITE = MK
BLACK = MP
Just copy and paste this over top of the matching section in yourof mugen.cfg:
; P1 Key config (configurable from M.U.G.E.N)
[P1 Keys]
Jump = 30
Crouch = 17
Left = 16
Right = 31
A = 51
B = 40
C = 38
X = 52
Y = 53
Z = 39
Start = 28
; P2 Key config (configurable from M.U.G.E.N)
[P2 Keys]
Jump = 18
Crouch = 19
Left = 20
Right = 21
A = 22
B = 37
C = 25
X = 23
Y = 24
Z = 50
Start = 37
Step 5: Playing xmugen.
Now for the fun part: playing xmugen. Launch the xmugen default.xbe. Youll get a Gentoox loader screen which is the screen used for launching any Linux apps. Select FatX (your hard drive) and you should see xmugens Linux load and going through the launch process. Now depending upon how many characters and stages you have, the screen will remain black until it finishes loading. You will then see the menu once it's finished loading.
From here on out its your choice what to play. You have the standard 1 on 1 Arcade mode, Team modes and Survival. In my opinion the Team/Team Co-Op modes are the reason to play Mugen. Ever since the days of Street Fighter Alphas hidden Dramatic Battle mode, my friends and I have yearned to gang up on the CPU and beat the living hell out of it. Even better, you can now do 2 on 2 which can REALLY give you some competition.
Even better than all of that, is the fact that you can tweak the characters attributes to your liking. You ever wish that your super bar didnt stop at 3? Think that a character deals too much damage? Wish your character had more life? It is really simple to tweak the settings although you can really mess up the games balance if you mess with it too much (backing up the character you plan to modify before hand is HIGHLY recommended). To edit the players attributes, find their standard .cns file. Normally this file is the same name as the characters .def file. At the very top of the file, you should see some common things: Life, Attack, Defense & Power. As a general rule of thumb, these settings are normally as follows:
Life=1000
Attack=100
Defense=100
Power=3000
When playing Team Co-op, you share a super bar. So whatever the Power attributes of the 1st character is set at, will be what is shared between the two. I feel that for a hectic 2 on 2 battle, a level 3 super bar isnt big enough. I prefer to have the bar set at level 6 (3 for each character, or a full 6 for one if the other character holds back). This makes for a DBZ esque game where if your character supports it, one character can hold back and charge up the bar, while the other one holds off and/or unrelentlessly attacks the CPU. Theres nothing like going in and pulling off some 100+ hit combo with super after super, then finishing with a Raging Demon. Some people might think that this would be cheap or cheating, but really, it comes down to your skill ability. You cant charge up your bar if you have an Evil Ryu teleporting behind you, or a Shin Akuma raining fireballs down upon you.
Credits
That should cover most normal things youll encounter with xmugen. If you encounter something not listed here, or have something to add to FAQ, post it and Ill try to edit it in. As stated before, try to keep this as a compatibility/configuration type thread so, keep the character and other types of requests to another thread.
Id like to thank Alg5 for giving us this excellent port to entertain me for a long time to come. Also big thanks to DarkCloud12X who started the excellent Epsxe thread which has inspired many people to try and make linux ports like this (which I feel is about to explode with tons of excellent ports soon). Thanks to Mugen gurus like Vejita and r1sky who have been helping people like me get this running well on my xbox. HUGE thanks to Sludge, who's Xmugen Renamer program has made it 10X easier and faster to configure Xmugen. Also thanks to stig87 for creating an Xmugen forum for us, and anyone else in the forums that have contributed to xmugen in any way.
This post has been edited by Thraxen: Mar 27 2006, 08:46 AM
Post by: infidelity on March 01, 2006, 07:53:00 PM
eve/ "folder"
common.snd
common1.cns
Copy of select.def
fight.def
fight.sff
fight.snd
fightfx.air
fightfx.sff
mugen.cfg
select.def
system.def
system.sff
system.snd
and then inside the "eve" folder
common.snd
common1.cns
doh2.cns
fight.def
fight.sff
fight.snd
fightfx.air
fightfx.sff
gameover.def
gameover.sff
mugen.cfg
select.def
system.def
system.sff
system.snd
The other thing, is I have the "mugen" motif pointing into the "eve" folder, if that makes any sense?
I've tried deleting the files in the "data" folder, and put in the new data folder files, but the game crashes, I then tried putting it in the "eve" folder, and that didn't work either.
I'm so confused on this issue. I've been able to edit the select.def files to point to other folders containg different types of music, stages, characters, etc, etc, but I can't get this screenpack for the life of me.
I really want to try this new Duracelleur Pack. The character select screen looks so awesome, and the lifebars look awesome as well. Could someone be kind enough, to tell me exactly what to do with this data folder? Thank You.
This post has been edited by infidelity: Mar 2 2006, 03:55 AM
Post by: Vejita on March 03, 2006, 04:25:00 PM
Open up mugen.cfg with notepad and change Depth = 32 to Depth = 16.
Now find FullScreen = 0 and change it to FullScreen = 1.
Xmugen will now boot straight up to the main menu without having to press down on the left stick.
Post by: xscarydrummerx on March 13, 2006, 06:15:00 PM
Post by: Reese Kaine on March 14, 2006, 12:37:00 AM
This post has been edited by Reese Kaine: Mar 14 2006, 08:40 AM
Post by: Jimbo1 on March 20, 2006, 08:31:00 PM
Post by: r1sky on March 21, 2006, 03:53:00 PM
Post by: DevGuy2k6 on March 24, 2006, 09:38:00 PM
(IMG:http://x10.putfile.com/3/8212204885.jpg)
and the ONLY thing i have plugged in to my Xbox is a STANDARD mircosoft "S" controller
my xbox has:
128mb ram
300 gig hdd
and is running unleash-X
Post by: Reese Kaine on March 25, 2006, 12:26:00 AM
Post by: guybird on March 26, 2006, 09:16:00 AM
Post by: Reese Kaine on March 26, 2006, 09:15:00 PM
QUOTE(guybird @ Mar 26 2006, 04:47 PM) 
Try Alg's newest irdloop update, which he says may elminate some problems with booting the Gentoox loader.
Nope, it still don't like my 480i/Component hookup. :-P
Oh well, I'll wait.
Post by: Ken34 on March 27, 2006, 01:17:00 PM
QUOTE
; P2 Key config (configurable from M.U.G.E.N)
[P2 Keys]
Jump = 18
Crouch = 19
Left = 20
Right = 21
A = 22
B = 37
C = 25
X = 23
Y = 24
Z = 50
Start = 37
anyone figure this out yet?
Post by: stig87 on March 29, 2006, 01:00:00 AM
QUOTE(Ken34 @ Mar 27 2006, 08:48 PM) 
anyone figure this out yet?
Try the Xmugen-Spot forums, you may get a quicker reply. And more people will see it there.
Post by: davicoro on March 31, 2006, 04:33:00 AM
QUOTE(DevGuy2k6 @ Mar 25 2006, 05:09 AM)
hello everyone i have this problem:
and the ONLY thing i have plugged in to my Xbox is a STANDARD mircosoft "S" controller
my xbox has:
128mb ram
300 gig hdd
and is running unleash-X
i think this only happend on 128mb xboxes... i use the xmugen on a 128mb and on a 64mb and on the 64mb run fine but on the 128mb crash some times whit that same error...
Post by: alg5 on March 31, 2006, 12:43:00 PM
QUOTE(DevGuy2k6 @ Mar 25 2006, 06:09 AM)
hello everyone i have this problem:
and the ONLY thing i have plugged in to my Xbox is a STANDARD mircosoft "S" controller
my xbox has:
128mb ram
300 gig hdd
and is running unleash-X
i don't see any error on your photo. the /dev/js1 correspond to the 2nd joystick, so it's normal that it complain that it doesn't exist since you plug only one.
try this mugen and put it into your mugen directory:
http://rapidshare.de...1745/mugen.html
if not, edit the launch and try to put bigger value after each sleep.
i don't know if it will solve your problem, it's only things to try...
Post by: davicoro on March 31, 2006, 12:52:00 PM
QUOTE(alg5 @ Mar 31 2006, 08:50 PM)
i don't see any error on your photo. the /dev/js1 correspond to the 2nd joystick, so it's normal that it complain that it doesn't exist since you plug only one.
the error that is happend on the photo is that sometimes, wile one is playing, the game crashes and apear that screen that apear on the picture... as far as a can notice it only happend on 128mb ram xboxes
Post by: davicoro on March 31, 2006, 01:37:00 PM
QUOTE(davicoro @ Mar 31 2006, 08:59 PM)
the error that is happend on the photo is that sometimes, wile one is playing, the game crashes and apear that screen that apear on the picture... as far as a can notice it only happend on 128mb ram xboxes
most happend at vs screen if you sellect a big size char
Post by: Robdoggz on April 02, 2006, 04:00:00 PM
Post by: guybird on April 02, 2006, 06:34:00 PM
Post by: Robdoggz on April 02, 2006, 06:52:00 PM
Post by: snk4life on April 02, 2006, 10:57:00 PM
Post by: jman2004 on April 03, 2006, 04:21:00 PM
QUOTE(snk4life @ Apr 3 2006, 12:28 AM)
the farthest i get is toward the gentoo screen and it says Cd/dvd (pic of dvd), netowrk(pic of pc monitor) and advance (pic of pinguen) and dont know where to go from there so i was wondering if there is a picture faq that takes it step by step because so far i havent found one and still searching?
Post by: Opeth on April 10, 2006, 07:46:00 AM
QUOTE(jman2004 @ Apr 3 2006, 11:28 PM)
If you have x-mugen installed on your xbox hard drive, then you should also see a picture of a joystick and the words "FAT-X" below it. If you see this, choose this option and x-mugen should load.
I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy.
Post by: jman2004 on April 10, 2006, 09:32:00 PM
QUOTE(Opeth @ Apr 10 2006, 09:53 AM)
I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy.
Post by: recon_zero on April 10, 2006, 10:23:00 PM
Cannot load from disc, insert a correct boot disc and close the tray
Post by: Drkshadow on April 11, 2006, 01:50:00 AM
QUOTE(Reese Kaine @ Mar 25 2006, 07:57 AM)
Is there a setting that accomodates the 480i setting? I have a Component TV, but 480i's the best it can do, and the GentooX loader doesn't seem to like this "in-between" thing.
I believe i'm also having this exact problem, though i'm none too sure. I don't have an HD TV, but it does support component hookups as that's what i've got hooked up. The loader comes up with a wobbly screen and such and I can't read a darn thing.
Any help on how to fix this would be me thanking from the bottom of my heart. and it's a deep heart.
Post by: Omegan on April 11, 2006, 01:39:00 PM
Um just ot make sure the rar didnt come wit a sound directory, so i could make one and it wont mess anything up right?
Post by: guybird on April 11, 2006, 01:53:00 PM
Post by: EuroHEV on April 13, 2006, 03:46:00 PM
QUOTE(DevGuy2k6 @ Mar 25 2006, 05:09 AM)
hello everyone i have this problem:
and the ONLY thing i have plugged in to my Xbox is a STANDARD mircosoft "S" controller
my xbox has:
128mb ram
300 gig hdd
and is running unleash-X
When I try to boot xMugen, I also get this error.
Xbox 1.5
64 MB RAM
160 GB HD
Unleash-X
Post by: guybird on April 14, 2006, 08:29:00 AM
Post by: EuroHEV on April 14, 2006, 10:30:00 AM
QUOTE(guybird @ Apr 14 2006, 03:00 PM)
Once again that is not an "error", that is showing that linux is running perfectly fine as it has booted all of the correct drivers and joy2key is running. If you are seeing that, then that means that your Xmugen has crashed. This can be caused by a cApItAlIzEd screenpack when it shouldn't be, a character problem etc. It all depends on when it craps out to that. I'm assuming that its an issue with your screenpack, most likely you're using my ultimate pack and haven't renamed the /mugen/data/Custom folder to /mugen/data/custom .
Thanks for the answer!
Post by: Leviathan-ran on April 15, 2006, 08:57:00 PM
BG music won't play... at all... no matter what the file type
I've defined the song location in the mao def file as instructed, but the songs don't play...
Any ideas why?
Post by: dedication on April 16, 2006, 05:23:00 PM
QUOTE(Opeth @ Apr 10 2006, 02:53 PM)
I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy.
Post by: Leviathan-ran on April 16, 2006, 06:18:00 PM
everything else works fine in the game, sound effects work great.
But the background music just won't!
I've tried all kinds of file types, wav, mp3 mid, and still non of them load!!
No matter what map I add the sound to it still won't work!
even if I over ride it with a song in the select.def file they still don't load!
Maybe snd files will work with background music... if anyone else knows anything for the love of god please help out!
Post by: Leviathan-ran on April 16, 2006, 09:18:00 PM
what I had to do, was to give each and every stage I have in my MUGEN background music,
I think all the empty bgmusic tags were causing an error or something.
Anyway make sure that your mp3's/wavs are below 48khz stero otherwise they may not play.
Post by: guybird on April 17, 2006, 11:52:00 PM
Post by: Odb718 on April 18, 2006, 09:46:00 AM
I came accross 2 different mp3 songs that would not play.
I checked out the mp3s and neither of them said they were protected, but after I worked some magic with Goldwave (copy, open new, paste, save as) I got them running.
Other people have mentioned having this problem so if you can't get a particular song to load, it might just because of it.
Post by: georaldc on April 20, 2006, 08:17:00 AM
Lol, I hope that was explained right. Its because there's this nice screenpack I saw which needs a little tweak like that to work properly. http://www.mugenjet.achoo.jp/
Post by: MF29 on April 23, 2006, 08:24:00 AM
Post by: georaldc on April 23, 2006, 09:19:00 PM
This post has been edited by georaldc: Apr 24 2006, 04:20 AM
Post by: Odb718 on April 24, 2006, 12:57:00 AM
Other forums and IRC channels do not have to play by X-S's rules. You might want to try and ask there.
Post by: Auximines on April 26, 2006, 02:45:00 PM
QUOTE(Opeth @ Apr 10 2006, 02:53 PM)
I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy.
I had this problem. I had all the files placed in their correct location as per the readme, and I had opted to put the actual mugen directory in F/GAMES. But apparently it won't work like that, after I moved the actual mugen directory to E/mugen, it worked fine.
Now I have to figure out how to put the Mugen stuff on the F drive. (E's too small!) (IMG:style_emoticons/default/uhh.gif)
Post by: Odb718 on April 27, 2006, 06:14:00 AM
QUOTE(Auximines @ Apr 26 2006, 04:16 PM)
I had this problem. I had all the files placed in their correct location as per the readme, and I had opted to put the actual mugen directory in F/GAMES. But apparently it won't work like that, after I moved the actual mugen directory to E/mugen, it worked fine.
Now I have to figure out how to put the Mugen stuff on the F drive. (E's too small!)
Reread the tutorial of this thread. You just have to put the mugen folder in F:/ BUT you have to have a couple files in E:/mugen and a couple in E:/ too.
Post by: Auximines on April 28, 2006, 04:40:00 AM
QUOTE(Odb718 @ Apr 27 2006, 01:21 PM)
Reread the tutorial of this thread. You just have to put the mugen folder in F:/ BUT you have to have a couple files in E:/mugen and a couple in E:/ too.
QUOTE(Auximines @ Apr 26 2006, 04:16 PM)
I had all the files placed in their correct location as per the readme, and I had opted to put the actual mugen directory in F/GAMES. But apparently it won't work like that, after I moved the actual mugen directory to E/mugen, it worked fine.
Anyway, It crashed when I pressed down+left on the pad, it also crashed when I loaded a character that worked fine in Winmugen... I don't think I'm going to mess with this now. I'll just wait until a more stable version is available, or maybe when Openmugen is available.
Post by: livebox on May 14, 2006, 10:20:00 AM
Post by: r1sky on May 23, 2006, 02:55:00 AM
QUOTE(georaldc @ Apr 20 2006, 03:24 PM)
Also, I was wondering if it was possible to edit the character select screen so that if you pressed down, the cursor would bring you to the first slot of the next line. Normally, if there was a blank character slot under you, you wouldn't be able to press down. I would like the cursor to always move to the first character of the next line if you pressed down.
Lol, I hope that was explained right. Its because there's this nice screenpack I saw which needs a little tweak like that to work properly. http://www.mugenjet.achoo.jp/
late reply but i might have a fix and this is the only way i got around that. you need to edit the following text in system.def
wrapping = 1
moveoveremptyboxes = 1
and this line, try it if it works or not:
showemptyboxes = 0
i think this will only work with the style of the Mugen Fighting Jam style of select screen, where it displays sections and not boxed characters. the way i got it to work is that u can scroll right past the characters and when u find empty boxes, you can scroll down. the new problem is that if you go past like 20 boxes of characters, then one more to the 21st and get a empty box and u press down to go to the next section. you end up in the next section on box #21 from where u left off from the last row. this is the only way i got it all to work. mugen isnt advanced enough to actually return you to the beginning character after you press down.
Post by: georaldc on May 23, 2006, 06:43:00 AM
QUOTE(r1sky @ May 23 2006, 05:02 PM)
late reply but i might have a fix and this is the only way i got around that. you need to edit the following text in system.def
wrapping = 1
moveoveremptyboxes = 1
and this line, try it if it works or not:
showemptyboxes = 0
i think this will only work with the style of the Mugen Fighting Jam style of select screen, where it displays sections and not boxed characters. the way i got it to work is that u can scroll right past the characters and when u find empty boxes, you can scroll down. the new problem is that if you go past like 20 boxes of characters, then one more to the 21st and get a empty box and u press down to go to the next section. you end up in the next section on box #21 from where u left off from the last row. this is the only way i got it all to work. mugen isnt advanced enough to actually return you to the beginning character after you press down.
Hmm, worth a try I guess (though I didn't quite understand how it works). One workaround I did was trim down guybird's pack so I could fit only 30 characters per section (SF, DBZ, ANIME, etc). What I didn't understand by doing this was why the loading times didn't really improve eventhough I removed a lot of characters (and some stages as well).
Post by: r1sky on May 23, 2006, 06:31:00 PM
Post by: kuraikinzoku on June 02, 2006, 07:42:00 AM
can some one help?
i absolutly dont know what to do
Post by: gamemaster14 on June 10, 2006, 05:17:00 PM
Well what I am wondering is, does anyone know what the latest linux mugen is? The version that came with x-mugen is a 2001 version, is there a later version?
One more thing, Mugen Fighting Jam seams to take a while no matter what you have. I started with a few characters and am now up to 490 and it still takes 30 seconds to a minute to load
This post has been edited by gamemaster14: Jun 11 2006, 12:18 AM
Post by: guybird on June 10, 2006, 05:45:00 PM
As for the screenpack loading times, you gotta remember that the xbox only has 64megs of ram; not very much. Also remember that there are settings that you can tweak in the mugen.cfg file. However, setting mugen up for faster loading will reduce the in game performance. I can "suffer" through 20-30 secs of loading for a smooth running in game setup.
Post by: gordita37 on June 12, 2006, 12:58:00 AM
Post by: georaldc on June 12, 2006, 01:05:00 AM
QUOTE(gamemaster14 @ Jun 11 2006, 06:48 AM)
When you move characters from winmugen to x-mugen make sure you run them through x-mugen renamer first. Plus make sure you edit your select.def file. X-mugen can not find characters if they have caps in the titles. For example if your character is KenMasters in the select.def and it is kenmasters in the char folder x-mugen wont find it. Make sure you remove all the caps in the char names in the select.def.
Well what I am wondering is, does anyone know what the latest linux mugen is? The version that came with x-mugen is a 2001 version, is there a later version?
One more thing, Mugen Fighting Jam seams to take a while no matter what you have. I started with a few characters and am now up to 490 and it still takes 30 seconds to a minute to load
Do you know any other screenpack with acceptable load times that are similar to mugen fighting jam? (with a categorized character select screen)
Post by: gordita37 on June 12, 2006, 12:00:00 PM
Post by: r1sky on June 13, 2006, 10:28:00 AM
QUOTE(guybird @ Jun 11 2006, 12:16 AM)
I have no clue what if any newer versions of linmugen there are.
last linux mugen released was 04,14,2002. this should be the latest.
QUOTE(gamemaster14 @ Jun 10 2006, 11:48 PM)
One more thing, Mugen Fighting Jam seams to take a while no matter what you have. I started with a few characters and am now up to 490 and it still takes 30 seconds to a minute to load
well im running the sf3 screenpack with the categorized select screen. i had around 800 character and it really only took 2-3minutes to load and i got a 64mb xbox. now i have around 1400+ characters and it takes up to 5minutes to load.
Post by: guybird on June 13, 2006, 11:43:00 AM
Post by: soheilsx on June 18, 2006, 04:09:00 AM
Post by: Perfect Dark on July 03, 2006, 04:58:00 AM
i got xdsl and cant even get it working? its in a iso format that wont run off box hd,and i cannot use qwix on it either?
please some one help me,as ive been wanting to play mugen on xbox for ages!!!!!!
Post by: ade2004 on July 03, 2006, 09:39:00 AM
do i need a PC, coz my mugen is on my ipod(how do i put my mugen files on the xbox from my ipod)
also all my mugen stuff is winmugen, do i have to convert EVERYTHING to linux b4 i use xmugen?
thanks
Post by: Destroyah on July 08, 2006, 09:07:00 PM
QUOTE(jman2004 @ Apr 3 2006, 04:28 PM)
If you have x-mugen installed on your xbox hard drive, then you should also see a picture of a joystick and the words "FAT-X" below it. If you see this, choose this option and x-mugen should load.
And if you don't see this like I don't?
Post by: Perfect Dark on July 14, 2006, 08:29:00 AM
heres a quick guide for you stoners because there are things missing in that guide
Post by: Stratoharry on July 26, 2006, 03:33:00 PM
Post by: X_Brolly_X on July 28, 2006, 01:45:00 PM
QUOTE(Opeth @ Apr 10 2006, 03:53 PM)
I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy.
I have this same problem, and just like him it also works with everything on E. However E is way to small for chars and stuff obviously. I posted about this problem a few months ago, and just came back around the communtiy today to see if any of the new stuff would work, but I still have the same old problem. I am running on a softmod box btw.
Post by: justin138 on August 01, 2006, 01:20:00 AM
QUOTE
Error opening /dev/input/js1!
Are you sure you have joystick support in your kernel?
Are you sure you have joystick support in your kernel?
Above this, I have "Mad Catz MicroCOM found.", so I'm not sure what's going on. Any idea? The cursor blinks at the bottom here, my X-Box activity light flashing green every .5 seconds and no response from my controller..I also searched and found two other threads like this with no answer. I have one controller plugged in.
Any help would be greatly appreciated, as I kind of wasted a whole night configuring my Mugen setup and it seems to have been a waste..
This post has been edited by justin138: Aug 1 2006, 08:27 AM
Post by: guybird on August 04, 2006, 03:43:00 AM
Our new XMugen site. Has a much more current FAQ than this... I'm hoping to get this FAQ removed and just a link to the site as this is so outdated and useless now.
Post by: quanb24 on August 09, 2006, 09:46:00 PM
Post by: pungent on September 04, 2006, 06:47:00 PM
Post by: guybird on September 04, 2006, 11:53:00 PM
2. You should update the package as much of it is outdated (look at the site you got it from for more info, there is lots of discussion about it there).
Post by: pungent on September 05, 2006, 04:03:00 PM
This post has been edited by pungent: Sep 5 2006, 11:03 PM
Post by: krispykreme on October 14, 2006, 03:52:00 AM
Post by: F52 on October 24, 2006, 06:50:00 PM
Post by: quanb24 on November 22, 2006, 03:27:00 PM
Post by: georaldc on November 25, 2006, 08:58:00 PM
QUOTE(quanb24 @ Nov 23 2006, 05:58 AM)
hello i wanna know how u get past the screen that says "press F1 to contitue" everything else works fine i cant get past the screen help i press every button on ma controller it ant go away whitch buttons on an xbox controller is F1 help
I think you have to click one of the analog sticks
Post by: RoboChicken on November 28, 2006, 02:02:00 AM
Post by: azncomputertech on November 30, 2006, 01:22:00 PM
QUOTE(X_Brolly_X @ Jul 28 2006, 08:52 PM)
I have this same problem, and just like him it also works with everything on E. However E is way to small for chars and stuff obviously. I posted about this problem a few months ago, and just came back around the communtiy today to see if any of the new stuff would work, but I still have the same old problem. I am running on a softmod box btw.
for me i get a thing that says ^C then when it says finish then i type that in and it says file not found?? any ideas guys??
Post by: RoboChicken on December 25, 2006, 10:37:00 AM
http://www.youtube.com/watch?v=OxW4xNPKQ-U&eurl=
I can't believe this hasn't picked up in popularity yet. Maybe because of the difficulty involved with getting it running? Personaly I've seen that Xmugen works best if you limit F to 137GB and rest on G for big hard drives. If you have a 500GB and split F/G to 245+245 Xmugen won't load. I've seen it on 4 500GB so far.
This post has been edited by RoboChicken: Dec 25 2006, 06:37 PM
Post by: RoboChicken on December 30, 2006, 01:00:00 AM
Post by: RoboChicken on January 09, 2007, 05:45:00 PM
Post by: seanp2500 on January 22, 2007, 04:40:00 PM
And yes I mirror your opinion I cannot believe it is not more popular. I am trying my best in my area in ny to change that. But it appears to be because of the difficulty involved/lack of awareness...
This post has been edited by seanp2500: Jan 23 2007, 12:52 AM
Post by: pirichios on January 26, 2007, 03:21:00 AM
QUOTE(seanp2500 @ Jan 23 2007, 01:11 AM)
I see that you are posting quite a bit. Are you aware of the site here? : http://xmugen.nugnugnug.com/ ? I have been playing xmugen since 05/06. I simply love it. I upgraded the hd on my softmodded xbox just for Xmugen. I have yet to have any experience with the 500gb boxes and Xmugen. I will tell you this it can be a finicky prog due to the caching of a swap file of either 512-712 on x i believe or 1gb-2gb on the e or f drives. Sometimes you do have to clear cache to make space. Sometimes ur not booting maynot even be a cache issue. Some xboxes seem to like it in a folder called Games others in a folder called Emulators. If you are going through quite a bit of xbox mugen modding it I recommend with all due respect against sloppy sloppy. It can drive you quite batty lol. Oh I almost forgot to mention another thing yo may notice is that on 1.6 xbox's the screen is slightly zoomed in. So ver 1.0 is ideal for mugen play. I reread some of your posts and to be honest I doubt that Xmugen is incompatible with any particular brand/version xbox(i have seen it on quite a few variations at this point I can't imagine that the brand/hd makes a difference) I feel that this is more of a format/directory issue. You may want to tinker with the setup i have uploaded here (it is for large hd's) and see how the xbox's like it: http://www.sendspace.com/file/kfb3b8 (note I have since updated this quite a bit and even have the new cfem pack booting as will stay tuned for an update to this pack.) Nwayz hope this input helps ya! Now do me a favor and write a newb friendly tutorial to how to burn the iso to dvd. I know this can be done. I have no interest in one. Just for my small hd softmod friends. Ciao!
And yes I mirror your opinion I cannot believe it is not more popular. I am trying my best in my area in ny to change that. But it appears to be because of the difficulty involved/lack of awareness...
yeah im also trying to get mugen to become real popular around my area so far i have gotten a few friends to catch an interest on this, but im amazed how many people pass something this awesome without being aware.
i myself am trying to open a forum where people can trade characters that are no longer available.
and also i dont mind sharing my characters which i have tried to optimize for xmugen (i did it by extracting their snd files, doing batch editing of their sound files,and remounting their snd files to make them smaller and make them easier on the xbox's low 64 mb of ram. Also ive used utilities that help clean the sff files off them and they work great. im trying very hard to setup a small comunity where people can share m.u.g.e.n characters which are no longer found, or just share their m.u.g.e.n (windows or xbox) experience in general
ive setup a small thread in a forum i made for this here
My small forum for M.U.G.E.N
maybe if i can get some members we can make a database of which characters run good on xmugen, etc
if anyone needs help drop a message or feel free to start a mugen related thread there.
and also if you guys need to setup m.u.g.e.n for the first time visit the http://xmugen.nugnugnug.com/ site
Their site is the best, its awesome and very informative
peace
Post by: RoboChicken on January 28, 2007, 08:27:00 PM
QUOTE(seanp2500 @ Jan 22 2007, 03:11 PM)
I see that you are posting quite a bit. Are you aware of the site here? : http://xmugen.nugnugnug.com/ ?
Yes I am 9tendo on those forums
QUOTE
I will tell you this it can be a finicky prog due to the caching of a swap file of either 512-712 on x i believe or 1gb-2gb on the e or f drives. Sometimes you do have to clear cache to make space. Sometimes ur not booting maynot even be a cache issue. Some xboxes seem to like it in a folder called Games others in a folder called Emulators. If you are going through quite a bit of xbox mugen modding it I recommend with all due respect against sloppy sloppy. It can drive you quite batty lol.
It also won't work if you have widescreen enabled. Too late I've already gone nutz
Yeah I've done one load and was being lazy so I found an MFJ premade for PC and just converted it to Xbox without any testing. So far only 2 stages and Cloud crashes Xmugen. It's a 3.9GB load with a lot of characters I'm not even using yet. I just dumped a bunch in there for teh different screenpacks I wanna eventually integrate.QUOTE
You may want to tinker with the setup i have uploaded here (it is for large hd's) and see how the xbox's like it: http://www.sendspace.com/file/kfb3b8 (note I have since updated this quite a bit and even have the new cfem pack booting as will stay tuned for an update to this pack.) Nwayz hope this input helps ya! Now do me a favor and write a newb friendly tutorial to how to burn the iso to dvd. I know this can be done. I have no interest in one. Just for my small hd softmod friends. Ciao!
Thanks! What distro are you using on that? Whats cfem? I'd like to know how to get it to boot from DVD too. I'm going to burn it and see what happens. My biggest wish for Xmugen is X-Arcade/Quasicon support.
QUOTE
And yes I mirror your opinion I cannot believe it is not more popular. I am trying my best in my area in ny to change that. But it appears to be because of the difficulty involved/lack of awareness...
General reaction from people in my waiting room are amazement, disbelief, and laughter
.I was just at a local tilt arcade last night and was exchanging tickets when I saw a small crowd of the employees and some customers with a laptop and two controllers playing a game. I went to look at the commotion and it was sure enough it was MUGEN
Post by: seanp2500 on January 29, 2007, 04:35:00 PM
btw I have been watching robo chicken quite a bit and i think it rocks!!
This post has been edited by seanp2500: Jan 30 2007, 12:35 AM
Post by: NOMERCYX on January 31, 2007, 04:28:00 PM
NMX
Post by: seanp2500 on February 01, 2007, 03:30:00 PM
Oh and do check out my roster vid/xbox mugen demo quality kinda sux cause i was using a digi cam with vid capabilites my girl had. I had to compress the original avi file from a gig to like 55mb lol
http://www.youtube.com/watch?v=--EDJ7HIL9c
This post has been edited by seanp2500: Feb 1 2007, 11:32 PM
Post by: pirichios on February 26, 2007, 09:37:00 PM
i ran the xbox version of mugen (xmugen) on my pc( which is running the freespire linux distro) when i ran it on my linux set up through the pc console it says
M.U.G.E.N test ver 2001.11.14
i downloaded a version of mugen for linux and the last one that elecbyte made seems to have been made on 2002.04.14
is there any reason for xmugen not using this "newer version" of linmugen?
please forgive me if im missing something as im barely learning on linux
or if there is a special reason in particular
Post by: seanp2500 on February 28, 2007, 10:28:00 PM
Post by: seanp2500 on March 16, 2007, 09:59:00 AM
http://www.sendspace.com/file/iilvue
Post by: xtremefighter01 on April 10, 2007, 08:26:00 AM
QUOTE(seanp2500 @ Mar 16 2007, 12:06 PM)
this didnt work for me... maybe I'm doing something wrong? Or should I try to look for 4.5 instead of 4? My xbox just hangs on the boot menu, I try direct boot and nothing happens, same with choosing any of the screenpacks
Post by: jfct555 on April 14, 2007, 08:19:00 PM
Post by: mtrf on April 19, 2007, 11:44:00 PM
I'm a not professional Mugen creator, but I'm try to make a game since 2002.
I wanna try this WIP on the Box ( Xmugen) but ....
I have this same problem ( as same specifications on my Xbox):
QUOTE:
"I get past this, and the Linux thing begins to load. I am loading XMugen off of the HDD, and select FatX at the Gentoox screen. Linux says:
(Forgive the typoes, I had to swap to composite cables to make it work and the res is difficult to read)
Adding Swap: 52420OK Swap Space (Priority -1)
bdah: Bad Access Block = 0, Count = 1
end request: I/O Error, dev 03:38 (hda), sector 0
Mount: Mounting /dev/hda56 on /cdrom failed: Invalid Argument
umount: /cdrom Invalid Argument
Mount: /dev/hda is write protected. Mount Read-Only
cdrom: open failed
mount: mounting /dev/hdb on /cdrom failed: No Medium
Kernel Panic: Attempted to Kill Init!
At this point the green light on the xbox blinks and it hangs forever. Any ideas?
I have a regular xbox, 64mb ram, etc. 1 S-Type controller plugged in, nothing fancy."
ANd I still can't run it. There's a solution for it really ?
For example, a latest softmod , put more HDD to the console? Or just buy another Box ( My console is the 1.6 version as the technician told me ) .
Please ........ THX in advance.
This post has been edited by mtrf: Apr 20 2007, 06:45 AM
Post by: Diddy41 on June 03, 2007, 10:53:00 PM
QUOTE("r1sky")
aside from what guybird has released/edited/made/whatever. here is my version. has all the updates ive done.
theres 2 versions. e drive and f drive. i doubt i have to explain what the differences are. anyways.
they go into X:/Games/
1 gb swap file
has mfj screenpack set to doubleres4
speed tweaks
dvd loading merged (just find a tutorial/whatever to create the dvd)
pretty much, the whole thing is setup to work 100%. its already had lots of testing from new ppl and works great for them. this thing is all drag and drop. just upload the xmugen folder to your 'Games' folder and your good to go. just upload your characters and add them to the select.def.
anyways, i decided to use a external source to upload the files. i wont be messing with it anymore nor will i keep coming back to this forum
For E drive: http://www.sendspace.com/file/b9gbj8
For F drive: http://www.sendspace.com/file/sxidc2
edit: i might release a screenpack addon but who knows. so here is a dvd creator addon. its my same setup from before. but you can extract this file anywhere on your hdd and copy over your xmugen setup and make a working dvd. once again, all drag and drop. just follow the readme included.
http://www.uwizone.c...9-dvd_addon.rar
theres 2 versions. e drive and f drive. i doubt i have to explain what the differences are. anyways.
they go into X:/Games/
1 gb swap file
has mfj screenpack set to doubleres4
speed tweaks
dvd loading merged (just find a tutorial/whatever to create the dvd)
pretty much, the whole thing is setup to work 100%. its already had lots of testing from new ppl and works great for them. this thing is all drag and drop. just upload the xmugen folder to your 'Games' folder and your good to go. just upload your characters and add them to the select.def.
anyways, i decided to use a external source to upload the files. i wont be messing with it anymore nor will i keep coming back to this forum
For E drive: http://www.sendspace.com/file/b9gbj8
For F drive: http://www.sendspace.com/file/sxidc2
edit: i might release a screenpack addon but who knows. so here is a dvd creator addon. its my same setup from before. but you can extract this file anywhere on your hdd and copy over your xmugen setup and make a working dvd. once again, all drag and drop. just follow the readme included.
http://www.uwizone.c...9-dvd_addon.rar
Post by: iceflow420 on September 19, 2007, 09:08:00 AM
Thanks
Post by: dan72588 on October 03, 2007, 03:48:00 PM
thanks
Post by: ssjandu on October 06, 2007, 12:54:00 PM
Post by: RoboChicken on October 12, 2007, 02:08:00 PM
It's down!? NOooooooooo!!!!!
Can't even find it on waybackmachine
It's been wiped from the internet
Post by: RoboChicken on October 15, 2007, 08:59:00 AM
http://xbox.nugnugnug.com/
Post by: RoboChicken on October 15, 2007, 02:29:00 PM
Guybird, what happened??
This post has been edited by RoboChicken: Oct 15 2007, 09:29 PM
Post by: dan72588 on October 16, 2007, 09:53:00 PM
Post by: xmugen360 on October 18, 2007, 04:39:00 PM
http://www.youtube.c...?user=seanp2500
My complete Xmugen game for modded xbox made to run off e drive just drag and drop:
http://hosted.filefront.com/seanp2500
I believe alpha
s xmugen came stock to hold about 1,000 maybe (alpha's screenpack is hella cool good choice!) you would like kurumin or 10,000 EVE. But remember with a little system.def editing you can make as many rows and columns as you want...
Post by: RoboChicken on October 18, 2007, 05:28:00 PM
QUOTE(xmugen360 @ Oct 18 2007, 04:15 PM)
My XMugen youtube channel:
http://www.youtube.c...?user=seanp2500
My complete Xmugen game for modded xbox made to run off e drive just drag and drop:
http://hosted.filefront.com/seanp2500
I believe alpha
s xmugen came stock to hold about 1,000 maybe (alpha's screenpack is hella cool good choice!) you would like kurumin or 10,000 EVE. But remember with a little system.def editing you can make as many rows and columns as you want...
I love you! But in a totally NOT gay way
One question, does it have to be in E: ? and can I change it to F:?
Post by: xmugen360 on October 19, 2007, 12:32:00 PM
Post by: RoboChicken on October 21, 2007, 01:54:00 PM
My F mugen isn't working right. This one launches unleash-x as a front end first. Yours I think is different. I'd like to give your F setup a go if you have it. I already have the full E load from that link you provided so I already have the chars/sound/data/stage stuff. Thanks!
-Robo
Post by: xmugen360 on October 21, 2007, 07:14:00 PM
Post by: Azriphale on October 30, 2007, 02:31:00 PM
Its wayyy to big and the aspect is off.
Does anyone know what video mode i could change in DATA\mugen.cfg?
Tried different ones but it wont change.
Edit: its really ironic that the first xmugen forum is still up and the new one is giving fatal errors.
This post has been edited by Azriphale: Oct 30 2007, 09:33 PM
Post by: xmugen360 on October 30, 2007, 03:09:00 PM
the whole old site still up thing is very funny and I have thought about hijacking it....
This post has been edited by xmugen360: Oct 30 2007, 10:10 PM
Post by: Azriphale on October 31, 2007, 09:56:00 AM
Yes its a version 1.6. Didnt know video modes could be attributed to select versions. I guess i will have to deal with it. xmugen360, i dont think i could see your sendspace files, only your recently downloaded/favourited.
As for hiijacking the old forums, theres only one forum not locked, the general discussion. We could try Mirc and logging on to #xmugen on EFNET, went there yesterday but i got no responses. Im not sure whether they were bots or what.
Post by: xmugen360 on October 31, 2007, 12:07:00 PM
Check out my channel all of these vids are done with a 1.6
http://www.youtube.c...?user=seanp2500
Post by: Azriphale on November 01, 2007, 12:33:00 PM
Im finding it hard to search for packs (even to rename and relink).
Thanks for all your info dude.
Post by: xmugen360 on November 01, 2007, 03:22:00 PM
Post by: Azriphale on November 02, 2007, 07:35:00 AM
Luckily i spotted that i had to have the original xmugen\data\mugen.cfg. With the stages and motif all linked properly. I know what im doing now. Suppose it was a matter of trial and error. I am also thankful that the winmugen and linux mugen files are basically the same(minus the emulator).
Now its just a case of getting as many full packs as possible, id rather that to picking single chars and stages and editing screenpacks.
Post by: xmugen360 on November 02, 2007, 10:17:00 AM
Post by: r1sky on November 04, 2007, 09:28:00 AM
Post by: problem_child on November 05, 2007, 03:52:00 PM
Necro_rk released/updated [Mugen Executer]
(IMG:http://img61.imageshack.us/img61/6505/mexvn8.jpg)
(Note: loader for screen packs)
Get it here: http://www.mugenlatinoamerica.org/foro/sho...11888#post11888 & (Description and manual) here: http://www.geocities.com/necro_rk/MEX_manual_eng.htm
Post by: r1sky on November 06, 2007, 10:19:00 AM
Post by: Ecoman15 on December 25, 2007, 01:33:00 AM
Post by: xmugen360 on December 25, 2007, 01:38:00 PM
http://hosted.filefront.com/seanp2500
Post by: Ecoman15 on December 28, 2007, 03:26:00 AM
Dark God Ryu
Holy Ken
God Ryu
MB-02
Ogre
God Ken
Sean Matsuda
Silent Storm
psycho weapon
Blaze Agent
Some old timer named UBU(looks like gen except shirtless but can wup alot of ass)
Cammy
and i think thats about it
Post by: shulbocka on February 20, 2008, 07:23:00 PM
Post by: Vejita on February 21, 2008, 09:56:00 AM
Post by: FourTwentySmiles on March 11, 2008, 03:32:00 PM
I have installed a build of Xmugen to my F drive, and now when I try to launch it, it boots straight to a black screen.
Any help would be great.....I'd love to play this thing!!!
Post by: FourTwentySmiles on March 11, 2008, 11:39:00 PM
Post by: FourTwentySmiles on March 12, 2008, 01:53:00 AM
I put this question here instead of the nix*on xbox forum cause I really want Xmugen running on my Xbox.
And Ive read you dont even need Xdsl or anything to run Xmugen now, but I cant get it working either way. ( with or without Xdsl working)
Im drowning in it right now......help!
Post by: FourTwentySmiles on March 12, 2008, 11:09:00 PM
If I understand correctly...I need to edit the select.def file. Seeing as how my dev skillz are up to par with the likes of Napoleon Dynamite (and you know he gots skillz).......Im screwed.
Maybe not.......Once I understand what Im lookin at, Ill be ok.
I Hope.
Post by: FourTwentySmiles on March 13, 2008, 02:02:00 AM
PLEASE!!!!!!!! Help me!!!!!!!
Post by: FourTwentySmiles on March 13, 2008, 02:33:00 AM
Post by: FourTwentySmiles on March 13, 2008, 04:20:00 AM
Post by: FourTwentySmiles on March 13, 2008, 06:21:00 PM
Post by: FourTwentySmiles on March 14, 2008, 12:18:00 AM
There WAS a link to a vid on how to install to xbox, but with so many versions who knows if that would have helped. I say "would have" cause I watched it....or tried to watch it. The video is blurry all the way through...and the guy speaks with a very strong Indian ( from India, not Native American) accent. You cant see or understand much of anything.
This is just too bad.....I really wanted to experience Mugen and I dont play games from my PC. I thought this would be perfect for me.
Guess I'm just S.O.L. for the moment.
Post by: FourTwentySmiles on March 14, 2008, 02:18:00 AM
It would be ALOT simpler for others to enjoy if anyone with a working copy of this would upload it somewhere......and then maybe post a link?
P.S. - I started this a week ago with hair to my waist..........I am now bald from pulling it out!
Post by: FourTwentySmiles on March 14, 2008, 02:36:00 AM
Here is the link....Xmugen m3troMOD v1
This IS the ONLY version I can get to run properly.
I still cant add characters, and let me tell you......Playing KUNG FU MAN, well, it aint no big thrill.
I still cant add stages, and let me tell you.....You see where this is going? Right?
What is going on?
I hear about so much success with this thing, but Im startin to wonder how it gets the hype it does.
If it is such a pain in the butt to get going....and a pain to update...and a pain to add characters...or stages and music.
Seems to me like it would be more fun to play, not to have to re-dev.....just to see one guy in a karate suit.
Post by: marveldcbruno on March 14, 2008, 08:35:00 AM
go here to get it. let me know what happens. Again what controllers are you using if you have the dvd ir in one of the ports or any thing besides the controllers i told you about it will crash. Good luck.
http://www.esnips.com/web/X-Mugen49/
Post by: tabasco1031 on March 14, 2008, 09:31:00 PM
Post by: marveldcbruno on March 14, 2008, 09:40:00 PM
Hey tabasco what screenpack are u looking for.
Post by: tabasco1031 on March 14, 2008, 09:56:00 PM
The renamer just isnt working for when i try brokenmugen
Post by: marveldcbruno on March 14, 2008, 09:58:00 PM
Post by: tabasco1031 on March 14, 2008, 10:10:00 PM
Post by: FourTwentySmiles on March 14, 2008, 10:56:00 PM
marveldcbruno.....mam....u have been a God send. thanx, man
Post by: FourTwentySmiles on March 15, 2008, 02:20:00 AM
Slim Mugen works GREAT from my unit.
Even detects my characters.
Only problem I am having now is screenpack. I need one that will show all 600+ characters I have.
I have tried the Copy over DATA folder and Sound folder....except I dont have a sound folder, so that wont work.....( I tried...it didnt work). I also have a screenpack that you upped....brokenmugen.....But I could not get that one working either.
I found a screenpack I would love to have called...AlphA-XMUGEN_ScreenPack....and it was designed for XMugen, but that one doesnt work for me either. I know it works cause I first seen it in a youtube vid.....but I must be doing something wrong.
Every time I try adding a screenpack...no matter what I try.....Slim Mugen always shows "Basic" in the screenpacks section. When I hit "A" button to select it, the loader runs then gives me the old "JS1" thing.But like I said earlier....if I just drag-n-drop Slim Mugen into my emulator folder and drop my Select.def into the data folder, it works GREAT.
But I still need a new screenpack.
Man......I must sound like a real douche. ( I can say douche on here, right? Douche is not a cuss word.)
Post by: VampX on March 15, 2008, 05:42:00 PM
QUOTE(FourTwentySmiles @ Mar 15 2008, 09:56 AM)
Man......I must sound like a real douche. ( I can say douche on here, right? Douche is not a cuss word.)
Its actually French for "Shower".
Post by: FourTwentySmiles on March 15, 2008, 08:17:00 PM
EVERYONE!!!!!!!!! I've Done It!!!!! I Now Have Xmugen With BrokenMugen Screenpack Installed. Thanks to marveldcbruno for ALL and Everything!!
Post by: marveldcbruno on March 15, 2008, 10:07:00 PM
Post by: FourTwentySmiles on March 17, 2008, 06:55:00 PM
Post by: FourTwentySmiles on March 17, 2008, 10:45:00 PM
Like pages 9-10? Anyway...... download Slim Mugen. If you need a screenpack get BrokenMugen.
These worked for me.....thanks to marveldcbruno.
Slim Mugen<<<LINK
Post by: xbox226 on March 18, 2008, 04:38:00 AM
anyways, i'm still stuck. unleash X starts up, i go to Screenpacks, and then select Basic (i haven't tried to add any Screenpacks because i just want to get it working first before i start customizing it). i get the black boot screen with all the text (and that guy's picture up at the top). things seem to be going well but when it gets to the "Microsoft Xbox Controller S found" part, i get some errors (i think...it says something like "0 records in" "0 records out" blah blah blah) after that and it just stops/freezes. btw, my LED turns orange/yellow during the boot sequence. i don't know if that's normal...
i've tried to describe my issues the best i can. somebody please help me!
Post by: FourTwentySmiles on March 18, 2008, 07:47:00 AM
Post by: xbox226 on March 18, 2008, 08:52:00 AM
when i launch Slim Mugen from F: Games and i go to Screenpacks and then select Basic it goes to the boot screen (the one with the picture of the guy at the top) and then a bunch of text comes up on the screen but then it just stops and freezes.
Post by: marveldcbruno on March 18, 2008, 09:03:00 AM
Four twenty. download 4.9 and in the data folder is the Mugen Fighting Jam Screen pack MFJ its just like the EVE but better. Try that and let me know if its what your looking for.
Post by: xbox226 on March 18, 2008, 09:08:00 AM
Post by: marveldcbruno on March 18, 2008, 09:19:00 AM
what i think you should also try is download the 4.9 xmugen from the link in pg 10 and place that in f:games and try to launch it from file explorer in unleash x and try that. For some people slim work other 4.9 is better.
Post by: xbox226 on March 18, 2008, 09:46:00 AM
4.9: "???Games/xmugen/swapfile/r1skyswap: No such file or directory"
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
Slim: "???0 records in"
"???0 records out"
"???ting up swapspace version 1, size= 536866816 bytes"
"???: bad accress: block=0, count=1"
my screen calibration gets all messed up when i get to the boot screen so i can't see the first little part of all the text on the left side (hence the ???).
Post by: marveldcbruno on March 18, 2008, 10:06:00 AM
Post by: marveldcbruno on March 18, 2008, 10:18:00 AM
Sorry what i meant to say if it boot of of e and not f you might have a bad drive.
Post by: xbox226 on March 18, 2008, 10:37:00 AM
i tried running 4.9 and Slim from E: and still the same results.
Post by: xbox226 on March 18, 2008, 10:55:00 AM
thanks for your help anyways. i guess i'll have to stick with WinMugen for now.
Post by: marveldcbruno on March 18, 2008, 12:57:00 PM
Post by: FourTwentySmiles on March 18, 2008, 03:12:00 PM
What I done was un-rar Slim Mugen. Transfered Xmugen to my F:/Emulators folder. I then launched it from XBMC (which loads the unleash-x looking loading screen for Xmugen.....not the one with Akuma in the flames) and its been smoooooooooth ever since. Just listen to marveldcbruno.....he got me right.
Ill try that screenpack.......I like BrokenMugen but it doesnt have slots for all my characters. Thanks again marveldcbruno.
Post by: livebox on March 22, 2008, 04:42:00 PM
Post by: bmud on March 23, 2008, 06:28:00 PM
www.osysi.net/files/xboxmugen_dx_v1-1.zip
There's a big long readme that's easy to read - so read it!
Post by: marveldcbruno on March 25, 2008, 04:19:00 PM
Post by: yujinha on March 27, 2008, 05:06:00 AM
a lil about myself you ask? well i am a real splintercell agent except unlike sam fisher, i make it look good. when im not working or running down the 5-0 with my gangstas while doing drug runs, i like to save humanity by slaying an onslaught of zombies or what they prefer to be called. life empaired, and you know im great at it. ive read the zombie handbook.
anyway back on topic. i am having the same problem as xbox226. i have tried about 5 different versions and same 2 different out comes. with the slim version when i select the basic screenpack. it just freezes right there. with the other ones it gets to the part with the pic of the guy but after a few lines my xbox light turns orange and the last line says:
kernel panic:attempted to kill imit!
i tried lunch them on both unleash and xbmc, from games and emulators folder on both e and f drive including the root of drives. i have had no luck at even booting just once. i dont think its the hdd bc iv tried this on three consoles. only one has a upgrade. the console im trying to get it to work on has a 500gb hdd, 64mb memory, version 1.0, xbmc dash, and softmod. now is there any luck for me bc i love killing zombies but not as much as i love fighters. thanks in advance.
Post by: Justmichaelds on March 27, 2008, 06:45:00 AM
Post by: marveldcbruno on March 27, 2008, 04:32:00 PM
yujinha i think your problem might be a partition problem. How did you partition with unleash x. And where are you launching from e or f
Post by: Justmichaelds on March 27, 2008, 04:58:00 PM
QUOTE(Justmichaelds @ Mar 27 2008, 08:21 AM)
i Downloaded the xmugen 4.9 and it doesnt work....it just got to the linux screen where they have the copywrite etcc..but nothing loads...is there some sort of conifguration i have to do to make it work..?
on that note i also tried the slim muge and it works fine but i wanna try the xmugen i have which comes with over 500 char...any suggestions on what to do...what do i need to do?
Post by: yujinha on March 27, 2008, 07:02:00 PM
Post by: marveldcbruno on March 28, 2008, 02:33:00 PM
Make sure you put it e games and launch from unleash x. Let me know if that works cause a lot of people are having the same prob.
I also forgot remember that it need a 1 gig swap to work. So if your e drive is all filled up try to free up some space. move emulator and apps to the f drive if you can.
Post by: Justmichaelds on March 28, 2008, 05:27:00 PM
kernal panic: attempted to kill init! "
Post by: Justmichaelds on March 29, 2008, 06:31:00 PM
Post by: problem_child on March 29, 2008, 10:14:00 PM
i tried using both 4.9 and Slim and they both freeze on the boot screen. here's some of the text from when it freezes:
4.9: "???Games/xmugen/swapfile/r1skyswap: No such file or directory"
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
"???/dev/hdb is write-protected, mounting read-only"
"???open failed."
Slim: "???0 records in"
"???0 records out"
"???ting up swapspace version 1, size= 536866816 bytes"
"???: bad accress: block=0, count=1"
my screen calibration gets all messed up when i get to the boot screen so i can't see the first little part of all the text on the left side (hence the ???).
What's going on man, I have been using xmugen for about a year and a half now. Like you I had to figure out most of the stuff myself. I have used Guybird's setup, AMOC's setup, and this new R1isky's setup. I will try to help you with your problem. I have never used the slim though. I have had all 3 setup's running at one time once but I don't suggest doing it.
That error that you are showing only happens to me when you select xmugen and it tries to boot but it is not where it is supposed to be. Like you installed it in E/Games and it is supposed to be in F/Games or something. Depending on whose setup you are using check the configure file and make sure everything matches up. If using R1sky's make sure you put it in either E/Games or F/Games depending on which one you downloaded.
Also I have never been able to xmugen through xmbc. Some say their is a fix but I would rather boot it from another dashboard. So if you have xmbc put another dashboard in applications. Boot applications then evo or avalaunch then boot xmugen.
So i figured that i have ftp the xmugen to the E: instead of F/ and it loads fine the only problem is that i cannot ftp the whole xtreme xmugen to E: because it doesnt fit. So how can i use all the characters, stages and whatever else i need from xtreme xmugen if the dont fit in E: where should i put them in F: so when its time to load the character and stages it would show up...
You need to get another setup, if using R1sky's E/Games then download his F/Games setup because he came out with 2 so you could choose. R1sky's is one of the easier ones to configure so I would stay with his but there are others out there. Ever since the xmugen site shut down not many help with this so I know it can get fustrating. In other setups you can change this in the configure file.
Post by: Justmichaelds on March 30, 2008, 11:06:00 AM
Post by: problem_child on March 30, 2008, 09:08:00 PM
i Tried the F; verson one and it didnt work, just the e; one is there a way i can leave the xmugen on e and boot the games from f?
Nah, there is no way or no easy way to do that. Try this setup here http://www.megaupload.com/?d=4Q0D251M
Stig87 made this screenpack booter so you can use more than one screenpack at a time it is easy to configure try and get one screenpack booted and see if this works for you.
Also check the configure file if it's on E change all lines to F. Read the instructions carefully.
Post by: yujinha on March 31, 2008, 06:02:00 PM
1. is there a way to play with 480i?
2.how do you change the screenpack?
3.how can i play this on my f drive?
Post by: r1sky on March 31, 2008, 08:21:00 PM
running xmugen from xbmc is supported now i think. a friend/brandon had issues booting xmugen from xbmc since that was his main dashboard. he said he submitted a bug regarding the issue and he said it was fixed as of the latest builds. it was just a back/front slash issus. it was booting with "/" instead of "\". I suggest installing a fresh copy of the latest xbmc SVN build. if it doesnt work, i believe i have the xbmc script fix that can help launch xmugen via xbmc.
hdtv is still unsupported. although, there are some reports of users getting as low as 480p resolution.
if anyone is still after my last builds, they are located here: http://uwizone.com/r1sktaker/
ps: thanks to bmud. i already knew this but never got to fix it. the original dvd batch creating thingy i released is bugged. i had an old copy that 100% fully worked. i tried this not too long ago again and it indeed made me a 100% booting dvd. make sure you have nothing xmugen related on your hdd or you can just rename the folders, so the dvd doesnt look for them. this is why i never got to releasing a fix. it needs a lot of work to edit stuff out, so the dvd version wont search the hdd for xmugen files, only its swap file.
the file that bmud repackaged for me: www.osysi.net/files/xboxmugen_dx_v1-1.zip
my original: www.uwizone.com/r1sktaker/mugen/xboxmugen_dx_v1.rar
Post by: SmokeyFingaz on April 01, 2008, 06:50:00 AM
Post by: marveldcbruno on April 01, 2008, 08:33:00 AM
Post by: SmokeyFingaz on April 01, 2008, 09:42:00 AM
Post by: marveldcbruno on April 01, 2008, 10:31:00 AM
Post by: LioConvoy on April 01, 2008, 12:03:00 PM
EDIT: Lemme give you an idea of what I've done so far. I got Slim Mugen to work, everything loads up fine. I have no idea where to put the brokenmugen folder.. I read in a previous post that you extract all three of the archives to a folder called brokenmugen and then put it in the data folder? I'm not sure if this is right or not. Then, you said you have to edit the brokenmugen.def file... I looked but I couldn't find this file. I don't really know what goes where.
Post by: LioConvoy on April 01, 2008, 12:29:00 PM
Post by: marveldcbruno on April 01, 2008, 12:58:00 PM
Post by: LioConvoy on April 01, 2008, 01:42:00 PM
QUOTE(marveldcbruno @ Apr 1 2008, 08:34 PM)
once u have all the contents of the three files in one folder named brokenmugen in side that folder is the brokenmugen def file edit it. Then in slim all you do is launch the default.xbe file and it it brings you to a unleash x launcher and then select the screenpack.
ok, there are several def files in there and i'm not sure which one you're referring to.
Post by: marveldcbruno on April 01, 2008, 01:45:00 PM
Post by: LioConvoy on April 01, 2008, 01:50:00 PM
Post by: marveldcbruno on April 01, 2008, 01:54:00 PM
Post by: LioConvoy on April 01, 2008, 02:14:00 PM
Post by: marveldcbruno on April 01, 2008, 02:31:00 PM
Post by: SmokeyFingaz on April 01, 2008, 03:01:00 PM
1. dl. r1skys f drive setup - installed in f:\Games\xmugen
2. it works, I can boot through xbmc (my dashboard)
3. i can add characters & stages by editing the select.def in Games\xmugen\data\MFJ
evrything hunkydory!
____________________
now to the biggie:
i CANNOT change the screenpack, ive done all suggested thing:
1. dl brokenmugen form pg 10 (thnx for the file btw)
2. copy the brokenmugen folder into the data folder Games\xmugen\data\brokenmugen
3. edited my characters and stages in Games\xmugen\data\brokenmugen\brokendselect.def
NOW when i boot the linux screen pops up as usual, the swapfile gets mounted and then where it would usually boot into the first loading screen - it pops back to the linux boot screen and adds the following line:
allegro application is running on vt 2
followed by joystick related mumbojumbo - finishing with the line:
joystick /dev/input/js1 not present
i then edited the mugen.cfg file in Games\xmugen\data\brokenmugen and changed the relevant joystick information to the details in mugen.cfg in Games\xmugen\data (suspecting that as the mfj screenpack worked it might help brokenmugen to work) - it didnt!!!
it still gives me the same error.
i use a logitech cordless joypad that works flawlessly with the original r1sky f drive setup, ive tried with an original ms s controller and still the same.
HELP!! please - and please more tips for other screenpacks (i see that the brokenmugen file on pg 10 differs in its structure from the original brokenmugen on the official dl page - have there only been xmugen specific changes to it?)
Post by: marveldcbruno on April 01, 2008, 03:37:00 PM
i forgot to mention you did download all three parts brokenmugen, brokenmugen2 and brokenmugen3
Post by: LioConvoy on April 01, 2008, 03:50:00 PM
QUOTE(marveldcbruno @ Apr 1 2008, 09:31 PM)
that cant be right it should load brokenmugen. Delete the kfm folder and then drag the brokenmugen folder over. and when you launch the screenpack tab it should launch brokenmugen.
I know, it doesnt make any sense but that's what's happening.
I think it would be a good idea if someone would upload slim xmugen with the brokenmugen screenpack already installed because this is a lot more complicated than it looks..
Post by: marveldcbruno on April 01, 2008, 05:13:00 PM
I want to look at your xmugen setup upload it to mediafire if you can. I will still send you the slim with broken already installed.
Post by: hhhiryuu on April 01, 2008, 05:25:00 PM
The slim readme suggests changing the config.xml file to add more screenpak items, and implies you should add lines like
<Item Action="F:\Emulators\XMugen\Menu\mugenpak2.xbe" ...>Broken</Item>
<Item Action="F:\Emulators\XMugen\Menu\mugenpak3.xbe" ...>MJF</Item>
to create new menu items to select from (i.e. things to select to choose a specific screenpak). This implies that we should have multiple mugenpak*.xbe files in our Menu directory, but the distribution as is only has one. The readme also says we should create matching menulaunch files (i.e. menulaunch2 goes with mugenpak2.xbe), and that these files are what specify which pak should actually be loaded using the -r option:
./mugen -r brokenmugen& or whatever the screenpak is called. I can't figure out whether we actually needed different .xbe files for each menulaunch file, or whether renamed copies of the same .xbe will work each as long as the numbers match.
I think the simple fix to the problem if you only ever want one (non-default) screenpak is to change your launch (r1sky) or menulaunch (slim) file to say ./mugen -r <whichever one you want>& instead of just ./mugen & (Don't forget the &)
But that means we'll have to edit the launch file anytime we want to change screenpaks. If someone who has slim_mugen working with multiple paks and can select which pak they want from the menu could post their Config.xml or tell us about the contents of their Menu folder (how many .xbes, how many menulaunch files) I think that might let us solve the mystery.
Post by: LioConvoy on April 01, 2008, 07:00:00 PM
QUOTE(marveldcbruno @ Apr 2 2008, 12:13 AM)
i will upload tonight when i get home
I want to look at your xmugen setup upload it to mediafire if you can. I will still send you the slim with broken already installed.
Ok, here is my setup. This is exactly as I have it on my xbox.
http://www.mediafire.com/?w1mnuon41mt
Post by: marveldcbruno on April 02, 2008, 10:11:00 AM
Post by: problem_child on May 21, 2008, 11:41:00 PM
As far as the exit out xmugen by turning it off, I did some reading and it seems you have to do the same with linux if you are using xcromwell. Since xmugen is basically a port of linmugen and uses things that linux uses there probably isn't a fix for that.
I haven't gotten MKA yet, but like you I am a big MK fan, the funny part about this is about a year and a half ago I found out about MKP 4.1 by accident looking for emulators. It was hard for me to find help as well. Not too many people like putting up with xmugen. Now that I have been playing awhile being able to have characters from all the old 2D fighters on one game is cool. If you get a chance I suggest getting a screenpack and get characters you can find. If you need help ask me, because with mugen characters get more moves and can do crazier things then they could do before.
Also check out some of the OpenBOR mods at www.lavalit.com, they are like mugen but are games like Final Fight and Double Dragon. Some OpenBOR games you need to check out are Mortal Kombat Konquest, A Tale of Vengeance, and one more Mortal Kombat.
If you want to see what mugen characters and screenpacks I have check out my vlog at www.youtube.com/problemchild629
Hit me up if you have problems, and have fun.
Post by: guybird on May 22, 2008, 03:13:00 PM
F:/Emulators/XMugen/
/Ultimate XMugen/
/Broken Mugen/
/Mortal Kombat Anthology/
Is anyone else interested in something like this? Or do you guys just pick one setup, and use it only? I really want to get all of my setup up and running smoothly, but I haven't been able to get my XMugen to launch. Somewhere along the line my launcher either stopped working, or has gotten corrupted as I only get the first few lines of the Linux loading screen to display, then it apparently freezes. Anyone have any idea why I'm suddenly getting this?
This post has been edited by guybird: May 22 2008, 10:13 PM
Post by: yujinha on May 23, 2008, 10:32:00 AM
Post by: guybird on May 23, 2008, 12:34:00 PM
Post by: yujinha on May 23, 2008, 01:12:00 PM
error opening /dev/input/js1
any ideas on what im doing wrong?
Post by: oxxmudxxo on May 23, 2008, 01:25:00 PM
yujinha I get similar errors, something might still be in CAPS in the eve folder I would cheack that first.
I've been trying to get Sigh87s working on my F:/ but it keeps locking up on the DOS screen when I pick my screen pack from what I've seen every thing is in the right place and in lowercase. (IMG:style_emoticons/default/blink.gif)
I would love to have multiple screen packs I just cant get the darn thing to work.
Problem Child on the xbox dash under games I have r1sky's it says The King of fighters I was wondering if I can change it from The King of Fighters to Mortal Kombat Anthology if so what do I edit?
Thanks!
This post has been edited by oxxmudxxo: May 23 2008, 08:31 PM
Post by: yujinha on May 23, 2008, 01:49:00 PM
Post by: oxxmudxxo on May 23, 2008, 02:18:00 PM
Are you using the newest renamer? If not I think Problem Child has a upload of it a page or two back.
What are the errors?
This post has been edited by oxxmudxxo: May 23 2008, 09:20 PM
Post by: problem_child on May 23, 2008, 03:02:00 PM
@oxxmudxxo, I have never really thought about it I will see if you can change it though.
@guybird are you saying boot everything like emulators without booting an actual xmugen setup?
Post by: yujinha on May 23, 2008, 03:24:00 PM
Post by: problem_child on May 23, 2008, 07:48:00 PM
Post by: yujinha on May 23, 2008, 10:04:00 PM
Post by: problem_child on May 23, 2008, 10:51:00 PM
QUOTE(yujinha @ May 23 2008, 11:40 PM) 
isnt that for a different screenpack?
Are you talking about the xmugen setup? If you are you can use any screenpack you want to use with any of those setups. Some come with screenpacks but you don't have to use those screenpacks if you don't want to. You can just replace the screenpack with one you want to use.
Post by: yujinha on May 23, 2008, 11:10:00 PM
Post by: problem_child on May 23, 2008, 11:21:00 PM
Post by: oxxmudxxo on May 24, 2008, 08:56:00 AM
QUOTE(problem_child @ May 23 2008, 09:24 PM)
I use the one that holds about 1000, I have heard about the 10,000 one but have never tried it. Do you have one of the xmugen setups I posted a few pages back?
You posted it on a form I made before I came to this form heres the download for Stig87's.
http://rapidshare.com/files/117274349/XMug...booter.rar.html
Post by: yujinha on May 24, 2008, 11:18:00 AM
Post by: guybird on May 24, 2008, 12:47:00 PM
Post by: yujinha on May 24, 2008, 12:54:00 PM
Post by: oxxmudxxo on May 24, 2008, 03:24:00 PM
If EVE is under 4.5gigs than you should be able to use R1sky's and put it on E:/ to play it.
Do you need R1skys Setup, if so I'll upload it for ya. (IMG:style_emoticons/default/smile.gif)
Post by: yujinha on May 24, 2008, 04:27:00 PM
Post by: oxxmudxxo on May 25, 2008, 10:02:00 AM
QUOTE(yujinha @ May 24 2008, 06:03 PM)
that would awesome! as for running off the E drive, i just want that fior now to make sure everything works. after i format it will got to f drive. is the eve you have the 1,000 or 10,000 character select?
I'm sorry what I ment is I can make a upload of just R1sky's with out the EVE screen pack...
I guess if you make a upload of the EVE Data folder I should be abule to fix it so it runs on R1sky's and I'll make a upload that all you need to do is drag and drop it in the Games folder on youre xbox.
If you have EVE just send/upload the DATA folder and I'll do the rest for ya. (IMG:style_emoticons/default/biggrin.gif)
Post by: yujinha on May 25, 2008, 10:30:00 AM
2. its not just a data folder. there is also a font and plugin folder.
Post by: oxxmudxxo on May 25, 2008, 11:04:00 AM
QUOTE(yujinha @ May 25 2008, 12:06 PM)
1. i have No idea how to upload.
2. its not just a data folder. there is also a font and plugin folder.
OK, first put the data folder and the font folder in a folder name it EVE then compress it/ WinZip or WinRar.
Then go to http://rapidshare.com/ and click on the browse button find you're compressed document "EVE" and click on it to upload it.
Then get the web sight that it gives you after its done and copy and past it on this form so I can download it and then I'll fix everything and reupload it for you. (IMG:style_emoticons/default/smile.gif)
I'm pretty sure all I will need is the data folder and the font folder..
This post has been edited by oxxmudxxo: May 25 2008, 06:08 PM
Post by: yujinha on May 25, 2008, 12:19:00 PM
http://rapidshare.com/files/117553697/EVE.zip.html
Post by: oxxmudxxo on May 25, 2008, 02:30:00 PM
http://rapidshare.com/files/117581849/xmugen.rar.html
Oh, I almost for got you need at least 1.GB of free space to run R1sky's do to a swap file. (IMG:style_emoticons/default/dry.gif)
Thank Problem Child he just showed me how to do this a few days ago. (IMG:style_emoticons/default/biggrin.gif)
Post by: yujinha on May 25, 2008, 07:19:00 PM
This post has been edited by yujinha: May 26 2008, 02:20 AM
Post by: oxxmudxxo on May 25, 2008, 08:01:00 PM
QUOTE(yujinha @ May 25 2008, 08:55 PM)
thankyou thank you thank you!!finally i have eve. even works from XBMC. now well this work on f drive or not.
Unfortunately no. (IMG:style_emoticons/default/sleep.gif)
I think R1skys has one that is set to run on F:/ but I don't have it, I'll do some searching and try to find it for ya.
I've been trying to get Stig87's to work on F:/ but cant figure what I'm doing wrong. Stig87's would be grate because it lets you use a lot of diffrent screen packs.
Don't know if you know this but the charters will run real glitchy if you don't copy and past the common1.cns that's in the EVE folder in every charters folder.
This post has been edited by oxxmudxxo: May 26 2008, 03:11 AM
Post by: oxxmudxxo on May 25, 2008, 09:37:00 PM
http://rapidshare.com/files/117649274/xmug...drive_.rar.html
It turned out I did have it but I could never get it working you might have better luck so let me know how everything goes..
How to use..
1.First extract,
2.Then copy the eve folder from the old R1sky's on E:/Games and paste it in the data folder of this R1sky's/xmugen.
3.Edit the mugen.cfg that's in the "data" folder like this..
10 lines down you should see this.
motif = data/MFJ/system.def
Change this to
motif = data/eve/system.def
After that put it in F:/Games on you're xbox and it supposed to work but it wont for me. (IMG:style_emoticons/default/sleep.gif)
Good Luck!
This post has been edited by oxxmudxxo: May 26 2008, 04:38 AM
Post by: yujinha on May 25, 2008, 09:48:00 PM
Post by: yujinha on May 27, 2008, 01:03:00 PM
Post by: oxxmudxxo on May 27, 2008, 01:07:00 PM
<Path>F:\Emulators\XMugen\Menu\</Path>
I'm pretty sure I tried it in the F:/games and F:/emulators..?
I'll try it again and put it in emulators just to make sure..
That's too bad about MKA I love that game, I hope they get everything work out.
Wish I can find a website that has all the FATALITYS, it comes with a beta move list but it doesn't have all the moves/fatalities.
Thanks for the heads up Problem Child, I'll give stig's another try.
Yujinha, That is weird I don't know what to tell ya there made for a specific drives if you can move it anywhere whats the point in making one for E:/ or one for F:/.
To tell you the truth it shouldn't be working you got me confused as well. Have you played it after moving it around dose it still play right?
Post by: yujinha on May 27, 2008, 01:24:00 PM
Post by: oxxmudxxo on May 27, 2008, 02:24:00 PM
I put Stig's in F:/emulators it still locks up at the DOS screen.
It might be that some how I'm messing something up with the screen pack if you ever have time can you upload one of you're smaller screen packs for me to test out?
Yujinha,
You got me stumped, I tried it and I get a error on the DOS boot up screen.
As far it crashing at the end check the system.def in the eve folder you should see this line among others.
intro.storyboard = data/eve/ ;Intro storyboard definition (optional) *2001.04.01 NEW*
I'm not 100% sure but I think you need to type intro.def at the intro.storyboard = data/eve/.
like so..
intro.storyboard = data/eve/intro.def ;Intro storyboard definition (optional) *2001.04.01 NEW*
If I'm wrong Problem Child well let us know he fixed this for me on Mortal Kombat Project 4.5.
Problem Child, RULES!
lol.
Post by: problem_child on May 27, 2008, 02:25:00 PM
A lot of people have trouble booting xmugen from xbmc, they say newer builds have fixed that problem but I am not sure.
@oxxmudxxo, that is the only reason I can see that it doesn't work. If it says F/Emulators go ahead and try it again maybe even add another screenpack.
Post by: yujinha on May 27, 2008, 03:33:00 PM
http://rapidshare.co...system.def.html
i wasnt sure what system file you wanted. this was in xmugen/data/ not xmugen/data/eve.
i was wonder, i have an arcade stick for my ps2 and joybox for xbox, can i use it for xmugen?
Post by: yujinha on May 27, 2008, 03:57:00 PM
http://rapidshare.co...system.def.html
Post by: problem_child on May 29, 2008, 12:09:00 PM
http://www.sendspace.com/file/kwj9ab
@oxxmudxxo I am going to send you my menu files for mka later on for Stigs.
Post by: oxxmudxxo on May 29, 2008, 01:02:00 PM
I know you're on a dial up connection and I really appreciate you're uploads, it has got to be a pain in the @$$ for you to do..
Thanks.
Post by: problem_child on May 29, 2008, 08:00:00 PM
http://www.sendspace.com/file/rkzq1s
Put these in your Menu folder and your mka folder ( make sure your folder is called mka)
I used menulaunch9
You should be okay after this if not it is another problem
Post by: Tweak132 on May 30, 2008, 01:52:00 PM
since I lost my 26gb of mugen characters,stages,music and screenpacks
I am just now getting back into mugan and xmugen for my xbox
I can confirm I have slim Mugen running of of my softmadded via Ndure 500gb e drive via xbmc and it is working perfectly
I have yet to be able to get it working on my f or g drive I have partioned them in 32k
But on the linux bootuo screen i get a fatx error
I seem not to be able to find the xmugen renamer and yes i searched google for 2 days trying to find the blasted thing but could not find it grrrrrrr.......
anyhoo anychance someone could please point me to the right link in where to get it at?
Post by: problem_child on May 30, 2008, 02:34:00 PM
Xmugen Renamer
http://www.sendspace.com/file/f17hrv
Post by: oxxmudxxo on May 30, 2008, 06:22:00 PM
I FTP the four files and used them to copy over my menu and mka files but it sill will not work..
The only thing I'm guessing why it wont work is because of the version of my xbox.
I got this xbox the day they came out and it has the dreaded Thompson DVD drive, I'm guessing its the worst chip version out there for emulators too...?
I'm also having problems running Killer Instinct 1 on F:/ using KI XXX, KI2 works grate tho.?
It has been gives me random problems like this for a while.
When I first soft modded it I accidentally deleted around 80% of the HDD with out backing anything up, I got excited and screwed up deleting some emulators.
I had the RROD luckily it would still boot a game using the bios, I eventually got it working buy downloading a few things here and there and the people on the forms help ALOT!.
Right now I'm calling it my crap box. lol.
I'll get me a better xbox some time and try this again I know a place that sell used xboxes for around 70$.
Thanks for all you're help PC.
Post by: problem_child on May 30, 2008, 07:10:00 PM
I will also send you a couple of my mka setup files and the configure file for Stigs if you want to try it one more time.
Post by: oxxmudxxo on May 30, 2008, 08:12:00 PM
One question when running Stig's on F:/ do I need 1GB of free space for the swap file on E:/ or F:/ I had a gig free on both but I just added some more emulators a few days ago on E:/ so its under a gig right now.
I have a few KI emus but I like KIXXX v1.0 the best so far, I just got it awhile ago and it seems good.
I can get both KI & KI2 to run on E:/ I just have a problem with F:/ every now and then.
Anyways thanks PC.
This post has been edited by oxxmudxxo: May 31 2008, 03:30 AM
Post by: problem_child on May 30, 2008, 10:28:00 PM
You think that xmugen is having problems on F drive?
If so with Stig's you can change where xmugen loads because it has a configure file.
You would have to change every line that says F though. For example you could have it in E/Games instead of F/Emulators.
But you would have to change it everywhere, especially all 3 or 4 times on the mugenpak lines.
Post by: oxxmudxxo on May 31, 2008, 09:48:00 AM
Most of my emulators are on E:/ and there roms are on F:/ I had to reroute the rom paths to F:/ I guess I can try the same thing with Xmugen.
Put Xmugen in E:/ the charters, sounds and stages on F:/ and change the directory for them to F:/...?
This sounds like it might work, I'll give it a try.
Thanks for the idea PC I should have thought of it before.
Post by: Tweak132 on June 01, 2008, 12:42:00 AM
I am trying to find xmugen xtreme 2.0
Post by: problem_child on June 01, 2008, 01:27:00 AM
Post by: Tweak132 on June 01, 2008, 02:05:00 PM
Is there anyway to uprade the mugen to the 2002 version so I can get some Of the characters to work that will not work with the older mugen version?
I am trying to get some of the new hi-res characters to run but I am having no luck. (IMG:style_emoticons/default/sad.gif)
This post has been edited by Tweak132: Jun 1 2008, 09:07 PM
Post by: lilhwd on June 02, 2008, 08:32:00 PM
QUOTE(problem_child @ Jun 1 2008, 04:03 AM)
You can use any screenpack for mugen to use with xmugen you just need to be able to configure it right to run.
how do u knw wat to configure?? is it the same for every screen pack or is there a special meth u use??
Post by: problem_child on June 02, 2008, 11:08:00 PM
To configure the screenpacks for R1sky's is the easiest all you have to do is make sure that the fight.def and the system.def contents can be found by the setup. Take all the contents of the data folder and name it something like mka (Mortal Kombat Anthology) if that was your screenpack.
change lines like
spr =system.sff
to this
spr =data/mka/system.sff
You do this so it can be found in your xmugen setup.
With Stig87's you will have more than one screenpack in it so you have to edit like I said above, and you would have to edit the menulaunch file.
It would look like this
#!/static/ash
sleep 7
cd ..
./mugen -r pack&
sleep 1
.
To this
#!/static/ash
sleep 7
cd ..
./mugen -r mka&
sleep 1
.
Then what I do is make sure the menulaunch, menu, mugenpak.cfg, and mugenpak.xbe are in the Menu folder and the mka folder. and everything is ready. You should have up to 10 or 11 menulaunch files so if you choose to use menulaunch4 then you have to use menu4, mugenpak4.cfg, and mugenpak4.xbe.
Post by: hellfire2000 on June 03, 2008, 03:45:00 PM
/linuxrc:47: ./menulaunch1: not found
any ideas?
This post has been edited by hellfire2000: Jun 3 2008, 10:46 PM
Post by: Tweak132 on June 03, 2008, 09:04:00 PM
when I try and boot the MFJ scrrenpack it will boot the basic one instead any idea why this is?
also if i edit the motif in the mugen.cfg to motif = data/mfj/system.def
if i load the basic or the mjf screenpacks in the launcher it will load the mfj screenpack I have been working on this for 4hrs and I have ran out of idea
Anyone know what I am doing wrong and could point me to what I do need to do to be able to fix this?
Post by: problem_child on June 03, 2008, 09:40:00 PM
QUOTE(Tweak132 @ Jun 3 2008, 10:40 PM)
OK i got a 2 screenpacks up and running on Stig87's but I am having a problem
when I try and boot the MFJ scrrenpack it will boot the basic one instead any idea why this is?
also if i edit the motif in the mugen.cfg to motif = data/mfj/system.def
if i load the basic or the mjf screenpacks in the launcher it will load the mfj screenpack I have been working on this for 4hrs and I have ran out of idea
Anyone know what I am doing wrong and could point me to what I do need to do to be able to fix this?
Yeah, that happened to me a long time ago when I was using Guybird's setup, his and Stig's are kind of similar. That usually has something to do with your launch file or menulaunch with Stig's. Try another menulaunch file other then that it would be hard for me to help you, I am kind of hands on with that kind of thing I would have to be able to see how you got it setup.
QUOTE(hellfire2000 @ Jun 3 2008, 05:21 PM)
when i edit the menulaunch file i get this,
/linuxrc:47: ./menulaunch1: not found
any ideas?
xmugen is trying to find what to boot, make sure your edited menulaunch file is in both the Menu folder and the screenpack your are using also make sure the menu, mugenpak.xbe and mugenpak.cfg are in both your Menu folder and screenpack.
Post by: Tweak132 on June 03, 2008, 10:36:00 PM
now to get mkp4 to it using your guide problem child (IMG:style_emoticons/default/biggrin.gif)
Thanks for all the help you provided not only me but to others on this forum
This post has been edited by Tweak132: Jun 4 2008, 05:38 AM
Post by: lilhwd on June 03, 2008, 11:50:00 PM
QUOTE(problem_child @ Jun 3 2008, 01:44 AM)
Their are a lot of xmugen setups out right now the newer ones like R1sky's or Stig87's are some of the easier ones to use. Once you get your setup depending on what you are trying to do, for example you can only use 1 screenpack with R1sky's and you can put up to 11 or 12 on Stig87's.
To configure the screenpacks for R1sky's is the easiest all you have to do is make sure that the fight.def and the system.def contents can be found by the setup. Take all the contents of the data folder and name it something like mka (Mortal Kombat Anthology) if that was your screenpack.
change lines like
spr =system.sff
to this
spr =data/mka/system.sff
You do this so it can be found in your xmugen setup.
With Stig87's you will have more than one screenpack in it so you have to edit like I said above, and you would have to edit the menulaunch file.
It would look like this
#!/static/ash
sleep 7
cd ..
./mugen -r pack&
sleep 1
.
To this
#!/static/ash
sleep 7
cd ..
./mugen -r mka&
sleep 1
.
Then what I do is make sure the menulaunch, menu, mugenpak.cfg, and mugenpak.xbe are in the Menu folder and the mka folder. and everything is ready. You should have up to 10 or 11 menulaunch files so if you choose to use menulaunch4 then you have to use menu4, mugenpak4.cfg, and mugenpak4.xbe.
Thanks... still need tweekin myself 2 totally understand da meth
Post by: problem_child on June 04, 2008, 12:14:00 AM
Post by: Tweak132 on June 04, 2008, 11:00:00 AM
I have edited the menulaunch1 to
#!/static/ash
sleep 7
cd ..
./mugen -r mujenfightingjam&
sleep 1
this 4 files are in the menu folder also in the data/mujenfightingjam folder
menulaunch1 Edited to -r mujenfightingjam&
menu1.gz
mugenpak1.cfg
mugenpak1.xbe
Do i need to edit anything else to get this screenpack working in the screenpack bootloader
This post has been edited by Tweak132: Jun 4 2008, 06:14 PM
Post by: robot3 on June 04, 2008, 03:35:00 PM
My question I wanted to ask is if there is any way to adjust the screen size to compensate for tv overscan? If I am not mistaken mugen was picky with video pic size and you could not tweak it so to speak, but I want to be sure. I would love to be able to shrink the screen down a little so characters on the select screen, some wording and actual board play do not get cut off on the sides. I did try changing some of the options in the system.def and mugen.cfg with no luck. Is it possible to do anything or is this just a grin and bare it?
This post has been edited by robot3: Jun 4 2008, 10:36 PM
Post by: problem_child on June 04, 2008, 04:19:00 PM
QUOTE(Tweak132 @ Jun 4 2008, 12:36 PM)
ok I am still having problem I am getting a /menulaunch2: Not found error
I have edited the menulaunch1 to
#!/static/ash
sleep 7
cd ..
./mugen -r mujenfightingjam&
sleep 1
this 4 files are in the menu folder also in the data/mujenfightingjam folder
menulaunch1 Edited to -r mujenfightingjam&
menu1.gz
mugenpak1.cfg
mugenpak1.xbe
Do i need to edit anything else to get this screenpack working in the screenpack bootloader
Not really, is everything spelled right I see you spelled mugen, mujen. The main thing is that the edited menulaunch is in both Menu and your screenpack folder. Also in the configuration file you can change the mugenpak line you used to mugenfightingjam to make sure you picked the right one. If you keep having problems send me the screenpack and I will see if I can get it to boot.
Post by: lilhwd on June 04, 2008, 03:51:00 PM
QUOTE(problem_child @ Jun 4 2008, 02:50 AM)
I will try to help if you need it, just let me know what you are having problems with.
well since u offered!!
im tryin 2 da get da MVC3 screekpack 2 work with no avail [[big word 4 me]] if u want i can post a link via megaupload of what i have so u can tweak n inform me... not step by step but just a synop of wut u did for my future winmgen to xmugen alterations.... thankz in advance
as i watch da master at work!!!!!
Post by: Tweak132 on June 04, 2008, 07:03:00 PM
I do not get the menulaunch error anymore but every pack I try it will boot up the basic screenpack
if it comes down to it I will just use 1 screenpack for now and have the motif to data/mfj/system.def
atleast i can get that way to work lol
Post by: problem_child on June 05, 2008, 02:26:00 PM
QUOTE(lilhwd @ Jun 4 2008, 05:27 PM)
well since u offered!!
im tryin 2 da get da MVC3 screekpack 2 work with no avail [[big word 4 me]] if u want i can post a link via megaupload of what i have so u can tweak n inform me... not step by step but just a synop of wut u did for my future winmgen to xmugen alterations.... thankz in advance
as i watch da master at work!!!!! Is that the Hi Res screenpack? If so it is hard to get that to work properly in xmugen. For what ever reason when I load Hi Res screenpacks they appear so large you can 't really see what you are doing. I have asked for help configuring that for xmugen use, but I got no help in that area. Most people in the mugen forums either don't know or don't care about xmugen if they don't use it yourself. I already have that screenpack I will try to see if I can do something with it I had gave up on that for awhile.
Post by: lilhwd on June 05, 2008, 05:04:00 PM
Post by: Tweak132 on June 09, 2008, 08:32:00 PM
couple of screnpacks working in them PLEASE ?
like
mkp4
and mfj
This post has been edited by Tweak132: Jun 10 2008, 03:34 AM
Post by: problem_child on June 11, 2008, 02:22:00 AM
QUOTE(Tweak132 @ Jun 9 2008, 10:08 PM)
Can someone PLEASE PLEASE PLEASE PLEASE PLEASE upload a working xmugen screenpack boot loader with a
couple of screnpacks working in them PLEASE ?
like
mkp4
and mfj
Okay I can do that, I will post my AMOC setup with about 10 or more working screenpacks. I will post this without characters and stages though to keep the size down and it will still be big. I got this setup from seanp2500 so big props to him. I have dial up connection so when I can get to a computer with cable or something I will post it just not today. If you want to see pictures of how it looks check a few pages back, and I will also post character packs when I post the setup.
Post by: Tweak132 on June 11, 2008, 10:50:00 AM
QUOTE(problem_child @ Jun 11 2008, 09:58 AM)
Okay I can do that, I will post my AMOC setup with about 10 or more working screenpacks. I will post this without characters and stages though to keep the size down and it will still be big. I got this setup from seanp2500 so big props to him. I have dial up connection so when I can get to a computer with cable or something I will post it just not today. If you want to see pictures of how it looks check a few pages back, and I will also post character packs when I post the setup.
Awsome Thank you sooooo much I can not wait
Post by: yujinha on June 11, 2008, 04:12:00 PM
Post by: marveldcbruno on June 12, 2008, 09:50:00 AM
Anybody have tut on this Iv used renamer to fix them but i always get errors. Using 4.9 xmugen. I hate to keep asking people to make screenpacks for xmugen when i can learn myself.
Post by: 0riginalLegend on June 21, 2008, 09:44:00 PM
I'm using Evox too btw. I'm not sure if it matters or not but I've read in the previous pages that most you guys were using Unleashed X so I didn't know if it did or not.
Post by: oxxmudxxo on June 24, 2008, 04:39:00 PM
I've been trying to get a few screen packs to work with Stigs87's pack on F:/Games/ but have not had any luck....It locks up/crashes on the DOS boot screen.
I've tried a few things and I've finally give up...
A few pages back on this thread some one named "you're package" left a post saying that he had to format his HDD with a small portion of room on G:/ to prevent corruption or something.?.
I'm using a 40GB HDD with only a E:/ and F:/ portion.
I'm guessing we need to add a small amount of room on a G:/ portion of the HDD for it to work..... It really doesn't make any sense to me..
There is Risky's for E:/ that works grate, only problem is you can only use 1 screen pack.
Post by: darkman90 on June 28, 2008, 02:22:00 PM
I've been a fan of XMugen for over a year and love to see my XBox used as the ultimate fighter. I had a copy of r1sky's version that I got off of torrents (XTreme XMugen anyone?) that I deleted off the hard drive to make space available on my E:\ partion (ltools turned krazie softmodded 1.0 Xbox running XBMC as dashboard; hoping to add larger HD later, so I am stuck with just E now). Now as I'm trying to install XMugen again, at first being the same r1sky XTreme version with EVE instead, I get this error:
QUOTE
/static/ash: cant access tty: job control turned off
It then goes into the usual Joy2Key1 & 2 errors. I then tried with MFJ and got the same.
Now I'm trying to use Stigs87's version (putting in various screenpacks in hopes of using in an arcade cabnet in the faar future), and it is still giving me the same error. I wasn't sure where to put the screenpacks at first, but after long forum reading I found out from (a very helpful) problem_child that they need to be in the data folder with their respective configurations inside its own folder. I try it and I still get the same problem. I've only tried it with MvC2 (as right now getting that running is the #1 priority; XMugen trumps the $60 game w00t!), so I'll try the others i've put characters into and get back to you guys. Any help would be very appreciated!
-=darkman90=-
This post has been edited by darkman90: Jun 28 2008, 09:23 PM
Post by: darkman90 on June 28, 2008, 03:41:00 PM
Found the problem:
My MvC2 was for Dos. I'm searching for a better version as I write. Also, it just gave me the usual errors I'd always run into (Mac = no renamer).
SSF2 worked! at least its better than nothing.
-=darkman90=-
Post by: problem_child on July 04, 2008, 03:37:00 PM
1. Brokenmugen (my version of a full game)
2. Mortal Kombat Anthology (with extras from MKP 4.4 by Liquid Jake)
3. A Murder of Crows xmugen set up with around 10 screenpacks
4. Stig87's setup with a couple screenpacks no characters
Post by: (XBOX) on July 04, 2008, 04:16:00 PM
I've never tried playing xmugen but would love to try it out could you send me # 2 MKA xmugen,
and any other working xmugen, with tons of various characters+stages(your best xmugen game not related to MK). One more thing I thought we couldn't upload links containing things like this? I'm guessing your just gonna upload setups/characters/stages, and not a actual working xmugen
Post by: Tweak132 on July 04, 2008, 05:30:00 PM
QUOTE(problem_child @ Jul 4 2008, 11:13 PM)
I have alot of stuff related to xmugen, but I wanted to know what you guys would want more. Since I have a dial up connection I have to make time to upload this stuff so I want to post what you guys would want. I can post all of it in time but what would you want first and I will try to make it happen this week.
1. Brokenmugen (my version of a full game)
2. Mortal Kombat Anthology (with extras from MKP 4.4 by Liquid Jake)
3. A Murder of Crows xmugen set up with around 10 screenpacks
4. Stig87's setup with a couple screenpacks no characters
I would so love
4. Stig87's setup with a couple screenpacks no characters
Post by: problem_child on July 04, 2008, 06:47:00 PM
QUOTE((XBOX) @ Jul 4 2008, 05:52 PM)
Whats "BrokenMugen" whys it called Broken does it work?
I've never tried playing xmugen but would love to try it out could you send me # 2 MKA xmugen,
and any other working xmugen, with tons of various characters+stages(your best xmugen game not related to MK). One more thing I thought we couldn't upload links containing things like this? I'm guessing your just gonna upload setups/characters/stages, and not a actual working xmugen
I have seen xmugen setups posted in the past so I figured it would be okay. I doesn't use any of microsoft's code it uses more linux then anything is their a problem with it?
Post by: (XBOX) on July 05, 2008, 06:10:00 AM
Post by: problem_child on July 29, 2008, 01:20:00 AM
This is for xmugen users (mugen on xbox). A lot of people have had a lot of problems getting screen packs, characters, stages, etc. to work so this is for them. Everything is already configured all you will have to do is install them on the proper drives.
In my folder there are 5 Xmugen files, you will need to download all 5 to extract. Once you have all 5 and extracted them and then FTP the Xmugen folder to F\Games and you are done.
In the Xmugen folder are
Brokenmugen (Full Game with chars,stages,sounds)
DC vs. Marvel screen pack
DC vs. Marvel screen pack (more slots)
Heroes vs. Villains screen pack
Mortal Kombat Anthology modified screen pack (with mkp 4.4 extras)
Lots of Stages and sounds
This is optional but if you like Mortal Kombat Anthology and Mortal Kombat Project 4.4 you can download all 3 parts of MKA4.4 for characters converted for the screenpacks. Put all characters in the chars folder and not the broken folder that is for the broken mugen full game. In MKP 4.4 the characters could do the Fujin Friendship, Sokram Lives Fatality, Blaze Mode, Summon Blaze, etc. Well I put all those extras in the MKA screen pack, and converted all the characters from MKA to do the extras.
If you already have those characters and dont want to download them you can do it yourself. You can copy the extra codes from the top of 4.4s common1.cns file and paste at the top of MKAs common1.cns file. Then you can use 4.4s fighfx.air and fight.sff and put them in MKA.
Then all you have to do is edit each character just like you did for 4.4. BUT I highly suggest you download mine because they are already edited and it might save you a lot of time.
NOTE: As of right now this character does not work -cage,stages/mk-mytho-prision-1.def,order = 2
He is the second character in the select def sp either change that line to this cage,stages/mk-mytho-prision-1.def,order = 0 so you dont fight him on arcade mode or you try to fix him. I forgot about this.
For my AMOC setup download all 4 parts and put this Xmugen folder in F\Emulators . You can have both of these Xmugen setups on your xbox at the same time if you want since this is on F\Emulators and the other is on F\Games. I personally use both at the same time.
Here is what is in this setup - No characters at all
AlphaXmugen screenpack
Capcom AllStars screen pack
CFEM screenpack
CVS2 screenpack
Duracelleur screenpack
EVE screenpack
KFM screenpack
Kurumin screenpack
MKP 4.3 screenpack
Marvel Super Heroes screenpack
Mugen Fighting Jam screenpack
MVC2 screen pack
SF3 screenpack
SF vs. MK screen pack (slightly modified)
SFZ3 screenpack
Slim EVE screenpack
Xmen COTA screen pack
DO NOT Pick DC vs. M 2 it does not work I forgot to delete it from the configure file
Lots of Stages, and sounds
I also uploaded the latest Xmugen Renamer for lower casing everything and Stage Viewer to check out stages before you put them on.
Post by: problem_child on July 29, 2008, 05:29:00 AM
QUOTE(problem_child @ Jul 29 2008, 02:56 AM)
http://www.filefactory.com/f/d61fe17c5d6eabe5/
This is for xmugen users (mugen on xbox). A lot of people have had a lot of problems getting screen packs, characters, stages, etc. to work so this is for them. Everything is already configured all you will have to do is install them on the proper drives.
In my folder there are 5 Xmugen files, you will need to download all 5 to extract. Once you have all 5 and extracted them and then FTP the Xmugen folder to F\Games and you are done.
In the Xmugen folder are
Brokenmugen (Full Game with chars,stages,sounds)
DC vs. Marvel screen pack
DC vs. Marvel screen pack (more slots)
Heroes vs. Villains screen pack
Mortal Kombat Anthology modified screen pack (with mkp 4.4 extras)
Lots of Stages and sounds
This is optional but if you like Mortal Kombat Anthology and Mortal Kombat Project 4.4 you can download all 3 parts of MKA4.4 for characters converted for the screenpacks. Put all characters in the chars folder and not the broken folder that is for the broken mugen full game. In MKP 4.4 the characters could do the Fujin Friendship, Sokram Lives Fatality, Blaze Mode, Summon Blaze, etc. Well I put all those extras in the MKA screen pack, and converted all the characters from MKA to do the extras.
If you already have those characters and dont want to download them you can do it yourself. You can copy the extra codes from the top of 4.4s common1.cns file and paste at the top of MKAs common1.cns file. Then you can use 4.4s fighfx.air and fight.sff and put them in MKA.
Then all you have to do is edit each character just like you did for 4.4. BUT I highly suggest you download mine because they are already edited and it might save you a lot of time.
NOTE: As of right now this character does not work -cage,stages/mk-mytho-prision-1.def,order = 2
He is the second character in the select def sp either change that line to this cage,stages/mk-mytho-prision-1.def,order = 0 so you dont fight him on arcade mode or you try to fix him. I forgot about this.
For my AMOC setup download all 4 parts and put this Xmugen folder in F\Emulators . You can have both of these Xmugen setups on your xbox at the same time if you want since this is on F\Emulators and the other is on F\Games. I personally use both at the same time.
Here is what is in this setup - No characters at all
AlphaXmugen screenpack
Capcom AllStars screen pack
CFEM screenpack
CVS2 screenpack
Duracelleur screenpack
EVE screenpack
KFM screenpack
Kurumin screenpack
MKP 4.3 screenpack
Marvel Super Heroes screenpack
Mugen Fighting Jam screenpack
MVC2 screen pack
SF3 screenpack
SF vs. MK screen pack (slightly modified)
SFZ3 screenpack
Slim EVE screenpack
Xmen COTA screen pack
DO NOT Pick DC vs. M 2 it does not work I forgot to delete it from the configure file
Lots of Stages, and sounds
I also uploaded the latest Xmugen Renamer for lower casing everything and Stage Viewer to check out stages before you put them on.
Post by: ultimate509 on July 30, 2008, 01:38:00 AM
Post by: problem_child on July 30, 2008, 11:42:00 AM
QUOTE(ultimate509 @ Jul 30 2008, 03:14 AM)
Since our gonna up-this again could you fix the known bugs and any known non-working characters and stages in your BrokenMugen, thanks for this P.C I've been wanting to try this out but I suck at setting-up Xmugen.
The first setup with brokenmugen doesn't have any issues I just amde a mistake because instead of the 5 files you see there are actually 10. So I am going to try to upload the last 5 as soon as possible. That is the setup with the full game brokenmugen. You can download AMOC now everything is there and ready it just doesn't come with characters or stages. But all the screenpacks work except for that dc vm 2 I ptried to put on there. The johnny cage character that doesn't work is from that mka4.4 files you can either delete him or change the select def. But once the files with broken mugen are there everything should work fine.
Remember you need all 10 xmugen files and put the XMugen folder in F/Games on your harddrive and that's it. With AMOC put that Xmugen folder in F/Emulators.
Post by: leggymcjeggy on July 30, 2008, 06:18:00 PM
I've managed to get xmugen up and running, but only in a green screen. I get that this is a video mode problem, but am out of ideas when it comes to fixing it! I've tried r1sky's version and the extreme version (which clocks in around 3gigs) and I just get the same result. (IMG:style_emoticons/default/mad.gif)
Not sure what my xbox version is, but im running it through a HD tv with a bog standard SCART cable (my component sockets are taken up by my 360)
Surley there's a way to fix this without me buying new cables and switching them round? Just some setting I've missed?
I've googled my ass off and you're are my last hope.
Thanks, Chris
This post has been edited by leggymcjeggy: Jul 31 2008, 01:23 AM
Post by: problem_child on July 31, 2008, 07:15:00 AM
SPECIAL NOTE: To anyone who downloaded any of the first 5 Xmugen files please delete those and download the new 11. Sorry for any confusion, my computer split the files wrong and I decided to fix a couple of things that could cause any problems. These new 11 files should be free of anything that could cause crashes.
This is for xmugen users (mugen on xbox). A lot of people have had a lot of problems getting screen packs, characters, stages, etc. to work so this is for them. Everything is already configured all you will have to do is install them on the proper drives.
In my folder there are 11 Xmugen files, you will need to download all 11 to extract. Once you have all 11 and extracted them and then FTP the Xmugen folder to F\Games and you are done.
In the Xmugen folder are
Brokenmugen (Full Game with chars,stages,sounds)
DC vs. Marvel screen pack
DC vs. Marvel screen pack (more slots)
Heroes vs. Villains screen pack
Mortal Kombat Anthology modified screen pack (with mkp 4.4 extras)
Lots of Stages and sounds
This is optional but if you like Mortal Kombat Anthology and Mortal Kombat Project 4.4 you can download all 3 parts of MKA4.4 for characters converted for the Mortal Kombat Anthology modified screenpack. Put all characters in the chars folder and not the broken folder that is for the broken mugen full game. In MKP 4.4 the characters could do the Fujin Friendship, Sokram Lives Fatality, Blaze Mode, Summon Blaze, etc. Well I put all those extras in the MKA screen pack, and converted all the characters from MKA to do the extras.
If you already have those characters and dont want to download them you can do it yourself. You can copy the extra codes from the top of 4.4s common1.cns file and paste at the top of MKAs common1.cns file. Then you can use 4.4s fighfx.air and fight.sff and put them in MKA.
Then all you have to do is edit each character just like you did for 4.4. BUT I highly suggest you download mine because they are already edited and it might save you a lot of time.
For my AMOC setup download all 4 parts and put this Xmugen folder in F\Emulators . You can have both of these Xmugen setups on your xbox at the same time if you want since this is on F\Emulators and the other is on F\Games. I personally use both at the same time.
Here is what is in this setup - No characters at all
AlphaXmugen screenpack
Capcom AllStars screen pack
CFEM screenpack
CVS2 screenpack
Duracelleur screenpack
EVE screenpack
KFM screenpack
Kurumin screenpack
MKP 4.3 screenpack
Marvel Super Heroes screenpack
Mugen Fighting Jam screenpack
MVC2 screen pack
SF3 screenpack
SF vs. MK screen pack (slightly modified)
SFZ3 screenpack
Slim EVE screenpack
Xmen COTA screen pack
DO NOT Forget to download the updated Config file. Open the Xmugen folder that came in AMOC and replace it with this new one.
Lots of sounds
I also uploaded the latest Xmugen Renamer for lower casing everything and Stage Viewer to check out stages before you put them on.
This post has been edited by problem_child: Jul 31 2008, 02:18 PM
Post by: ultimate509 on July 31, 2008, 11:36:00 AM
Post by: shulbocka on August 01, 2008, 06:30:00 AM
Post by: problem_child on August 01, 2008, 07:26:00 AM
Post by: shulbocka on August 01, 2008, 03:31:00 PM
Post by: carter477 on August 02, 2008, 11:52:00 PM
So, far, I've lowercased everything, and even "redirected" files to point to the correct folders, ex. motif=data/mfj/system.def to motif=data/cfem/system.def. Ok, however, when I go to load everything, it says it has trouble loading data/cfem/system.def. Can't figure out what I did wrong
Any assistance in this matter is greatly appreciated 
Post by: carter477 on August 03, 2008, 09:56:00 PM
Are you sure it is done this way, or is it different for some screenpacks?
Post by: shulbocka on August 04, 2008, 03:14:00 PM
Oh yeah, quick question. Does anyone know if you can give stages random music instead of having to pick a song for them? I know you can't give characters random stages, so you probably can't do it with music either, but it's still worth asking. Thanks guys, take it easy.
Post by: carter477 on August 05, 2008, 02:49:00 PM
by the way, I really appreciate all the hepl and hard work you put in trying to help us out, much appreciated
Post by: ultimate509 on August 07, 2008, 07:11:00 PM
QUOTE(ultimate509 @ Aug 7 2008, 11:56 AM)
PC, could you help me out. I downloaded the 11 xmugen files and unrared them together and the sencond file said it was broken/corrupt. So Iam re-downloading it as we speak to see if it was an error on my part. None the less I still got your xmugen setup(incomplete ofcoarse since it didnt unrar properly)and I tried to ftp it over to see if it would work regardless and It wouldn't let me ftp (Im guessing do to fat-! or 42 characters)....so my ? is did anyone else get the xmugen corrupt file & if not were you able to ftp it over & play it...what am I doing wrong.
ok so I downloaded it again and still broken
Xmugen part02
CRC failed in XMugen/chars/broken/demonictetsu/tetsu.snd.The file is corrupt
Im guessing there was a mistake while uploadin a character-So can you reupload the file again and let us know when you do thanks or do you think it would still run without that...
Post by: problem_child on August 08, 2008, 08:21:00 AM
QUOTE(ultimate509 @ Aug 7 2008, 08:47 PM)
ok so I downloaded it again and still broken
Xmugen part02
CRC failed in XMugen/chars/broken/demonictetsu/tetsu.snd.The file is corrupt
Im guessing there was a mistake while uploadin a character-So can you reupload the file again and let us know when you do thanks or do you think it would still run without that...
Damn, I was hoping something like this wouldn't happen. Reason being is I have dial up and had to use someone else's computer to upload this. I will tell you what it looks like the problem is just one character's sound file. FTP it over and if it works I will upload the problem character instead of the whole setup if not I will try to upload everything over.
Post by: shulbocka on August 11, 2008, 03:52:00 PM
Post by: General.chaos on August 13, 2008, 10:13:00 AM
There are so many file revisions and separate links that I've become lost.
Can someone please ZIP and up their xmugen folder complete with MKP already configured?
(if you can't upload it I can give you upload access to my FTP server, just PM me, and I'll see that it gets hosted)
Thanks
Post by: problem_child on August 13, 2008, 02:38:00 PM
QUOTE(shulbocka @ Aug 11 2008, 05:28 PM)
What's up guys? Got a quick question that's been bugging the crap out of me if that's cool? Is there some way to fix characters that make xmugen crash? I know that dos2win works occasionally, and also fixing the movereversed thing sometimes, but is there any other way if those don't work? Could you maybe use some of the files from another version of the same character that do work on xmugen, to make the other one work? For instance, I found a new version of Colossus that has all the same moves as another one I have, and you do them all the same way, the new one just is faster and combos a lot better, so I'd rather use that one. Sorry if that's a dumb question, I'm just desperate because I have a lot of characters like that. Thanks for any help you guys can offer, I appreciate it. Take it easy.
I wouldn't switch files from characters because people change things in the files when they do updates for their characters. And if the character is made by a different person they could have entirely different coding. What's wrong with the character you are trying to get to work, a crash at select or what?
Post by: shulbocka on August 14, 2008, 03:49:00 AM
Post by: shulbocka on August 22, 2008, 11:19:00 AM
Post by: robot3 on August 23, 2008, 02:00:00 AM
Post by: robot3 on August 23, 2008, 07:31:00 PM
Post by: robot3 on August 26, 2008, 10:29:00 PM
And might as well ask again. Any possible way to shrink the character selection screen so nothing gets cut off on the tv? I hate scrolling through the character selection only to find quite a number of hidden rows cut off by my tv (tv overscan)
Post by: robot3 on August 27, 2008, 07:33:00 PM
As for the tv overscan problem. Yes I did use the splinter cell exploit for my softmod, but you got me thinking. In unleash X for general options you can resize the entire screen for everything. If I shrink it down a little more and have a small border on all sides, this might fix mugen. Hmm will try that in the next few minutes....
since mugenx info seems to be scattered and sometimes conflicting. If someone made some screenpacks you can select but with no characters, does Mugen allow you to point the select.def to another directory where you do have characters? This way I techincally would not have to setup and copy characters for every screen pack I would like to use them in, instead just having it point to one main location
UPDATE:
1. you're right, the timer does nothing
2. changing the screen size in unleash x does not work, however messing with the Mugen.cfg file in mugen's main data folder does help to a degree... If you change this option under "video linux":
"Set this parameter to 0 to disable screen stretching, and set it to 1 if
;you want to scale it up to fit the current resolution.
Stretch = (change this to 0)
you do get everything, however in a way too small square in the center of your screen. Does mugen support any video sizes larger than 640x480? If the "windowed option" would work (I never got this to work, anytime I changed it from full screen to windowed, Xmugen crashes) then this would solve my (and I am sure others) problems.
besides re-installing a soft mod (which I do not want to do) is there anything I can do at this point to not have mugen stretched to full screen, but at least making the game screen itself bigger (I am fine with a border around it)?
Post by: robot3 on August 29, 2008, 03:41:00 PM
I still think there must be more settings or perhaps it is where everything is positioned (x,y) on the screen? I am pretty sure if I did mess around with the x and Y axis, I can bring things in closer. Another xbox made one (called xmugen extreme final) did not have as drastic screen cutting as broken has. Still more fun items to play around with
Correct me if I am wrong, but in order to use slayers evox disc to begin with, don't you already have to have your box modded? I do have the slayers evox disc 2.6, s by remodding with the slayers you are saying that it would overwite the splinter cell mod with a newer one? Pretty much it wont format and erase everything that is already on my drives will it?
Post by: problem_child on September 01, 2008, 06:44:00 AM
Here's a vid of the final boss Eyedol (fighting Shao Kahn in this vid)
http://uk.youtube.co...h?v=znZ4pU-gh0o
I changed this intro screen because I didn't really like the original one(It just had the face of Reptile from the movie and I didn't like the block letters they used for the SF vs MK so I used the real symbols) I also changed the intro music.
I also changed the lifebars to these (I like these better)
Here are some more vids
Liu Kang vs Gouki
http://uk.youtube.co...h?v=A78CokDiGo4
Sawada vs Jax
http://uk.youtube.co...h?v=TlCjLX8VZMA
M. Bison vs Raiden
http://uk.youtube.co...h?v=KJftL0LCgf4
I can also upload character packs so that you can start other screenpacks that you would want to fill up.
Post by: ultimate509 on September 01, 2008, 02:39:00 PM
I suck at stetting up X-mugen, Im sure there are others as well, Love those youtube vids looks cool!
I downloaded every link you've uploaded on X-Mugen but yet to have to play a single working X-Mugen game.
Got AMOC=cant figure it out
Mk Characters got them.
Other X-Mugen Steup you uploaded= Cant get it to work/Ftp over correctly cause of fatx.
on 1 set-up character file was corrupt..
WITH THIS SAID,....
Can we please get a X-Mugen Game (Your best seems like AMOC) that works, has full characters,Levels aready set-up for n00bs like me & a few others(I know I'm not the only 1 that cant get this crap to work!)
preferably a AMOC game you have on your hard-drive so there's no chance it wont be able to Ftp over incorrectly.I would like to try out that youtube X-Mugen game, (MK VS SF, your NEW set-up with new intro lifebar ect.) download & Ftp Only,please?.
Post by: problem_child on September 01, 2008, 03:09:00 PM
The only full game I have uploaded so far was on the first xmugen setup, the Brokenmugen game. The MKA stuff was just characters to put on the same setup because it already has the stages and sounds for it. Unlike Brokenmugen that has the broken folder in the chars folder you just put all the MKA characters (and JUST the characters NOT the MKA4.4 folder they came in) in Xmugen/chars. With fullgames sometimes I can't put them in their own folder.
AMOC is just a bunch of screenpacks that people can make their own setup it didn't come with characters.
I saw the post on Demonic Testu, if you extract it with winrar and is still corrupt just delete him out of the characters folder. Try winrar first and if not delete him. Then go ahead and FTP, and if anyone else has characters corrupted let me know and I will upload the character to you.
There's over 200 characters on that game, and he works fine for me and others as far as I know but don't let that one file mess with you. I know it's fustrating because I had to teach myself how to do alot of this but try that and get back with me I don't have to work today so maybe I can help your situation.
Post by: ultimate509 on September 01, 2008, 03:33:00 PM
I still have all the files on my computer & will give it another try (I think I did unrar them with winrar I have also 7zip anyhow I will give it ago)
Is there any chance you can hook-us up with the MK vs Sk the above set-up you displayed..ready to go.if not its alright Ill go back and try what you said..cya
Post by: problem_child on September 01, 2008, 03:56:00 PM
QUOTE(ultimate509 @ Sep 1 2008, 05:09 PM)
Thanks for replyin with info
I still have all the files on my computer & will give it another try (I think I did unrar them with winrar I have also 7zip anyhow I will give it ago)
Is there any chance you can hook-us up with the MK vs Sk the above set-up you displayed..ready to go.if not its alright Ill go back and try what you said..cya
Yeah, either way you can't go wrong if winrar doesn't do it just delete that demonic tetsu folder and run the game. 1 character can cause mugen not to work it's weird like that, but you won't miss him the main thing right now is getting it to work.
I will upload the MK vs SF when I bring my stuff ober my brother's house because I have dial up. I will do it soon as I can, but while I have to wait I am going to add more characters I think fit in the game and try to make it more fun and balanced.
Post by: robot3 on September 07, 2008, 09:07:00 PM
No luck, I have a second xbox to play around with and the picture size problem was not fixed at all. I should mention that I am using an older, analog tv. However since newer hd tv's do not have overscan (or virtually no overscan), trying xmugen from my xbox on a HD tv, nothing is cut off or removed. The picture is essentially perfect.
This means I either get an HD tv or just deal with some over scan. Not the end of the world
Problemchild,
I love your packs, and I too would love for you to upload your fixed and latest ones you mentioned in your previous post. Right now I am learning had to add screenpacks/games. I hope that the small, but full Star wars mugen game (that I just got a hold of) will work on the xbox.
another question
I was able to get the two bonus games (boards) for Contra and super mario brothers to work on xmugen (however perhaps from a smaller buffer, SMB the whole board does not fully load up immediately as you go along, it takes a second to catch up and even then not everything displays as it should. Contra, however works fine).
have any of you been able to get the "duckhunt" bonus game to work? The one I had said it was "not for this version of mugen", so I ran dos2win on it. I no longer get that message, but it just crashed the game instead. Just wondering if there is some sort of trick to get it working or if this is one of the few the xbox just cannot do?
Post by: shulbocka on September 09, 2008, 07:00:00 AM
Problem Child...you rock
Post by: robot3 on September 09, 2008, 07:16:00 PM
Post by: shulbocka on September 20, 2008, 10:53:00 AM
Post by: Deka_Night on September 24, 2008, 01:56:00 AM
Post by: SHMUP3R on February 03, 2020, 12:38:00 AM
THanks! you guys rock!
Post by: sotu on October 06, 2008, 12:28:00 AM
Post by: xiwanm on October 12, 2008, 10:26:00 AM
I ve just downloaded the brokenmugen pack on the filefactory link Problem_child posted.
According to what I ve read, I can use it as a standalone : i don t have to bother with AMOC, ...
I ve unzipped it and uploaded the XMUGEN directory to F/Games
After launching it, i can select the screenpack, I select brokenmugen, then it gets to a black screen where appears a lot of info.
The ultimate lines seems to describe a problem :
Mounted root filesystem of type : ext2
Adding swap : 524200k swap-space (priority -1)
Hdah: bad access: block=0, count=1
Cmd_request: I/O error, dev 3:38 (hda), sector 0
Mount : mounting /dev/hda56 on /cdrom failed : invalid argument
Kernel Panic : Attempted to Kill init !
Could you explain me what I could do ?
I have read that Xmugen is upset with partition size ...
I have resized my F partition so I wouldn t have to change the cluster size of my G partition.
Could Xmugen be affected by giving more space to the F partition.
Beforehand, thanks
xiwan
Post by: problem_child on October 13, 2008, 10:30:00 AM
QUOTE(shulbocka @ Sep 20 2008, 11:53 AM)
What's up guys? I have a huge problem with my xmugen. I added some new characters through ftp, and went to load up the mugen fighting jam screenpack, and for some reason when it starts to load up, it now says some weird fatx error and that the system has been set to read only. It then freezes right after the "Microsoft controller S found" part. I tried all the screenpacks and it does the same thing, and I even tried a different version of xmugen that's in my Games folder and not even in my Emulators folder, and it does the same thing, and I didn't even add the new characters to that version. After all that, I just reinstalled EVERYTHING back onto my xbox, and it still does it. This sucks. If anyone knows what's going on or what I did wrong, I would really appreciate the help. Mugen is my favorite game of all time, so this feels like I'm being shot. I did copy two xbox backups to my hard drive during the time I was adding the characters if that would for some weird reason have something to do with this. I doubt it though. Anyways, I hope you guys can give me a hand on this. Take it easy.
Are you still having this problem, if so post a reply this only happened to me once. I sent some stuff over FTP and it messed up make folder.
Post by: redfart123 on October 16, 2008, 03:23:00 AM
so right now i'm tearing my hair out wondering if any1 could help me with my Xmugen problem so that it's playable e.g get to menu and select chars.
ok so i have:
-Xmugen R1sky's F drive setup
-modded pal (AU) xbox
-XDSL E drive setup
now when i boot up xmugen i get this after it says its found my microsoft S controller
static/ash : can't access tty, job control turned off
joy@key -joystick one to keys
using parameters.
joy2key2 - joystick two to keys.
joystick /dev/input/js1 non present
then it just stays at the screen with the flashing cursor thing i have made it that xmugen skips the resolution prompt
what do i do to fix this or does any1 no away around this please help me
Post by: zipmaster on October 16, 2008, 07:16:00 PM
Post by: nheco on October 17, 2008, 05:17:00 PM
Well... read all 26 pages before post. I'm getting problems running XMugen MK Project 4.3 (uses r1sky xmugen F_drive)
Instaled at F/Games/xmugen/
This pack came ready for the xbox...
Here is the same problem:
Tried everything, and always getting this error.
My Box:
Xbox 1.6 softmod
2 controllers plugged
400G HDD (F and G partitions, both same size)
14G free at drive F
Need help! Thanks.
Post by: zipmaster on October 17, 2008, 07:34:00 PM
QUOTE(nheco @ Oct 18 2008, 12:53 AM)
Hi ppl.
Well... read all 26 pages before post. I'm getting problems running XMugen MK Project 4.3 (uses r1sky xmugen F_drive)
Instaled at F/Games/xmugen/
This pack came ready for the xbox...
Here is the same problem:
Tried everything, and always getting this error.
My Box:
Xbox 1.6 softmod
2 controllers plugged
400G HDD (F and G partitions, both same size)
14G free at drive F
Need help! Thanks.
looks like you have it in the wrong spot, try making sure all the directorys are capitalized right
Post by: nheco on October 17, 2008, 08:57:00 PM
QUOTE(zipmaster @ Oct 18 2008, 03:10 AM)
looks like you have it in the wrong spot, try making sure all the directorys are capitalized right
Just hex-edited the "irdloop" file, and found this:
CODE
swapon /mnt/Games/xmugen/swapfile/r1skyswap
Thats how my folders are... F/Games/xmugen/*.*
Thanks anyway
Post by: saig3n on November 13, 2008, 02:05:00 PM
I get that message saying:
"USB device 3(vend/prod 0xe6f/0x8803) is not claimed by any active driver" on .The controller doesn't work on the game. I get the main menu but i'm unable to continue.
I have a pelican and gamestop xbox controller and no luck. Is there like an update that makes my controller work? or do i need the authentic MS controller?
I have mine installed on the F: drive with 250GB HD.
I have been unable to play xmugen because of this - any help would be appreciated.
Thanks
Post by: iceflow420 on December 09, 2008, 07:44:00 PM
File Factory seems like such a P.O.S. - is there anyway to get a t0rr3nt (not sure if I can say this word here) of this file? This seems like a much better means of delivery than downloading 11 pieces of a file from a site that probably only works if you cough up $11 for a 1 month membership.
Thanks
Post by: drdystopia on December 28, 2008, 02:48:00 AM
I installed his Brokenmugen and upload on E:\ after doing a replace all in the config file to change all the F:\ to E:\
and it worked.
I just upgraded my harddrive to a 250G drive and FTP'd the same set up over to F:\ with the original config file and it won't get past the booting screen.
I then tried changing it to E:\ again since I know it worked there and still it freezes.
I get a message that says Fatx error, file system has been set to read only
then it says it found my controller and does nothing.
I only installed 1 char just to make sure it works.
Any ideas what could be causing this?
I think it is my new drive but I don't know how to change the write properties on it and every other emu/homebrew works fine.
Any help would be great since I bought the bigger drive just so I could play mugen.
thanks
Post by: Daggerx on January 17, 2009, 06:11:00 AM
Post by: Daggerx on January 18, 2009, 10:31:00 PM
Post by: melek-taus on February 15, 2009, 03:23:00 AM
i have an xbox 1.4 softmodded evox xmbc as my main dash and 64 mb ram. The hd is the original one putting a 30 gb in it today.
Atm i am dloading the 11 part xmugen setup from filefactory it just takes so long only at the 4th part.
I have xmugen 4.9 r1sky setup for e drive tried it under the games folder emulators folder and on the normal e drive. My xbox finds a game called kind of fighters. I can launch it under xmbc but i get a black screen with some coloured dissortion at the top of the screen. When i use the unleash x dashboard i get an error screen saying something of no cd killing itempt or so.
Tried slimmugen also tried it in the same way as above but it hasnt worked. I got so far that i could choose the basic screenpak but when kungfuman starts to load i just get the error screen.
tried xmugen metromod v1 but havent got that to work either same problems as above.
I also tried to use these mugen setups with brokenmugen but notting worked.
I got 2 joypads connected more then 2 gb left on the e drive. For some reason my f drive cannot be used i think its not partitioned
Can anybody help me setup xmugen and give some kind of tutorial how to set this up. I read this whole post but notting seems to work. I softmodded my xbox easely same goes for adding xmbc as my dash but trying to get xmugen to run damn dudes i just dont get it as far as any readme i am doing it right and it should work.
pls help me.
And i hope the 11 part xmugen setup works but what was that with an pasword if it has one pls share.
Post by: Nextelhalo on February 17, 2009, 06:55:00 PM
After that, open the filemanager in your xbox and there will be a folder named "swap file". Open that folder and delete the text file inside it that says "deleteme".
After that boot it up. One of the screens takes a minute to load so be patient.
Anyone out there find a good link for Xmugen Sky Edition?
I use Xtreme Mugen but the Sky has an assload more characters.
Post by: eyedontnowhatimdoin on February 19, 2009, 07:10:00 PM
I've searched everywhere for a solution, there was someone having the same problem on this thread, but apperently they had to reformat and repartion the drives and that just not an option for me or at least not worth it. are there any other solutions?
Post by: obluso on February 21, 2009, 11:59:00 PM
QUOTE(Nextelhalo @ Feb 17 2009, 10:39 PM)
I just got the 11 part mugen and it works just fine. You have to FTP it over to the F:Games folder or just use XBMC to transfer it.
After that, open the filemanager in your xbox and there will be a folder named "swap file". Open that folder and delete the text file inside it that says "deleteme".
After that boot it up. One of the screens takes a minute to load so be patient.
Anyone out there find a good link for Xmugen Sky Edition?
I use Xtreme Mugen but the Sky has an assload more characters.
I am new to the evolution x dash, well the xbox for that matter, I am not finding a "swap file" either.
I found the file manager. I have found a swap under E and F, but they dont have <> around them so I assume it is not a folder. that's under dvd2xbox.
my problem says press F1 to continue. I have clicked in the sticks and pad like ps2 R3/L3 to no avail.
Post by: obluso on February 22, 2009, 09:46:00 AM
QUOTE(obluso @ Feb 22 2009, 02:35 AM)
I am new to the evolution x dash, well the xbox for that matter, I am not finding a "swap file" either.
I found the file manager. I have found a swap under E and F, but they dont have <> around them so I assume it is not a folder. that's under dvd2xbox.
my problem says press F1 to continue. I have clicked in the sticks and pad like ps2 R3/L3 to no avail.
well I got it to get past the F1 prompt. I put in a second controller in the #2 and it moved F1 screen and now I can play arcade but it is not recognizing my second controller for vs. stuck on that.
and when I play on the arcade mode if I touch the right stick it resets the battle. so that sucks for game play. gotta find the fix to that.
This post has been edited by obluso: Feb 22 2009, 05:48 PM
Post by: eyedontnowhatimdoin on February 23, 2009, 12:06:00 AM
Post by: Nextelhalo on February 25, 2009, 12:57:00 PM
I've gotten that and BrokenMugen to work within the past few weeks. BrokenMugen is alittle
slow but the other runs like a champ.
Just remember, best to run off a 250gb or lower( or else you'll have to format in 32k) and i've seen
issues with some 1.6 boxes too, but only some.
Keep trying man, if i have to i'll seed the version i have for a while just so people can get it.
Post by: xyteam on February 25, 2009, 02:04:00 PM
Post by: nio107 on March 01, 2009, 03:17:00 AM
well, I already have installed and play with xmugen and it's really fun...try this setup, it was released on my forum a few days ago...
http://www.spriters-....php?topic=21.0
just download all the files, put them into F:Games directory on your xbox and it should work..if not.... maybe I can make a copy of my setup (now that I can ftp stuff)...
well that's all for now, hope you get it working, it's good, faster and fun as hell! (beware, you need to add an screenpack and lifebar)...
so if you have troubles with that...I will try later to upload my stuff
Post by: demonHyo on March 05, 2009, 01:36:00 AM
Post by: rocky5 on March 06, 2009, 02:30:00 AM
QUOTE(demonHyo @ Mar 5 2009, 10:20 AM)
hello. i'm new to the forums and to be quite honest i only joined for the reason that i want to get xmugen to run perfectly on my xbox. from the looks of things it won't be as easy as running it on windows. so i noticed the supposed updated Xmugen Faq link doesn't work... i don't mean to sound like a prick but i need to start somewhere. i'm not new to mugen but however i am new to xmugen and xbox in general.. just got mine. can someone give a helping hand to a know-nothing noob? ha thanks.
You will need to look around for a good version of xmugen if you find the bog standard version you will need to rename a folder in data to MFJ or you will get that damn error
CODE
static/ash : can't access tty, job control turned off
joy@key -joystick one to keys
using parameters.
joy2key2 - joystick two to keys.
joystick /dev/input/js1 non present
joy@key -joystick one to keys
using parameters.
joy2key2 - joystick two to keys.
joystick /dev/input/js1 non present
been sitting all morning trying to get it to bloody work lol also if you plan on playing it in HD you will need to edit the mugenboot.cfg and change the 640x480 to 720p or 480p you will also need to change the resolution in data/mugen.cfg
CODE
[Video Linux]
Width = 640 to 1280
Height = 480 to 720
Width = 640 to 1280
Height = 480 to 720
you can get the default version here with no characters. you need to rename the folder in this version
Xmugen
Does any one know how to use 128mb as i have that amount but it only seems to use 64mb
Post by: Tweakster on March 15, 2009, 08:32:00 AM
anychance some nice person can PLEASE upload a working Everyone vs Everyone screenpack that WORKS with xmugen PLEASE?
If I remember right r1sky uploaded a modified EVE pack he did once but the rapidshare link no longer works
I have tried for almost 24hrs now trying to get my eve screenpack to work with r1sky's F:\Games version and to no success all I get are errors and have tried renaming everything to lowercase via the renamer and yes I changed the motif to data/EVE/system.def but nothing
btw I had my F:\Games folder named all in lowercase and the r1sky's 4.9 Setup spit out errors
changed it to F:\Games and now it works!!!
After trying for almost 6 months off and on to get this working I could not believe that was the only thing wrong
Thanks for this setup r1sky everything runs smooth
Post by: Tweakster on March 16, 2009, 08:44:00 PM
I try to launch them through the loader if I put eve or mkp screenpack in say menulaunch9
and edit that menulaunch to either load one if the 2 I get a menulauch9 NOT FOUND in the dos screen when i try to load that screenpack
Does anyone know how to fix this or been able to if so HOW?
I know xmugen is dead but I LOVE 2-D fighters and am so close to getting xmugen setup working
I would really appreciate any help I could get
Post by: Reza1986 on March 18, 2009, 02:30:00 PM
QUOTE(Tweakster @ Mar 16 2009, 08:28 PM)
I give up on the screen pack loader of xmugen I have been able to get the mortal kombat project and EVE battle to boot on R1sky's setup and also one the screenpack loader but only if I change the main mugen config in the data folder to motif =data/mkp/system.def or motif =data/eve/system.def
I try to launch them through the loader if I put eve or mkp screenpack in say menulaunch9
and edit that menulaunch to either load one if the 2 I get a menulauch9 NOT FOUND in the dos screen when i try to load that screenpack
Does anyone know how to fix this or been able to if so HOW?
I know xmugen is dead but I LOVE 2-D fighters and am so close to getting xmugen setup working
I would really appreciate any help I could get
That's the same reason i never used the Screenpack loader, its always heck to get working. I just normally setup all screenpacks separately with its own configurations and when ever i need to play a different one i just copy the mugen.cfg file to the XMugen data folder and its works every time.
Post by: Tweakster on March 18, 2009, 04:01:00 PM
here is how I did it instead of editing a menulaunch file I opened up the xbox renamer app
clicked on launch file creator in the renamer copied this text into it
#!/static/ash
sleep 7
./mugen -r mkp&
sleep 1
./joy2key1 103 106 108 105 28 1 30 31 32 33 34 35 29 59 119 62 36 61 2 4&
./joy2key2 8 9 10 11 96 1 44 45 46 47 48 49 97 60 62 119 50 61 3 5&
# Here's the default order for buttons with joy2key
# ./joy2key (Dpad up) (Dpad right) (Dpad down) (Dpad left) (Start) (Back) (A) (X) ((IMG:style_emoticons/default/cool.gif) (Y) (Black) (White) (L3) (R3) (Right analog up) (Right analog right) (Right analog down) (Right analog left) (L trigger) (R trigger)
saved it to a menulaunch file
menulaunch9 since I used that one ftped that menulaunch file over to my existeng xmugen screenpack booters menu folder and replaced the old one with the new menulaunch9 file
on my xbox and also put the 4 menu files into my mkp folder in the data folder
menu9.gz
menulaunch9
mugenpak9.cfg
mugenpak9.xbe
remember to use the menulaunch files you used to setup the screenpack
I have done this for the EVE Battle and DC vs Marvel and mujen fighting jam Screenpacks with this method and I CONFIRM this method to work so if you are able to boot a screenpack via r1sky's or the bootloader if you configure tha main mugen.cfg file in the data folder to only boot that screenpack this will work
I hope this method will work for you also
This post has been edited by Tweakster: Mar 18 2009, 11:18 PM
Post by: Tweakster on March 18, 2009, 09:51:00 PM
QUOTE(Tweakster @ Mar 18 2009, 05:45 PM)
WTF I FINALLY GOT THE BOOTLOADER TO BOOT DIIFF SCREENPACKS!!!!!!!!!!!!
here is how I did it instead of editing a menulaunch file I opened up the xbox renamer app
clicked on launch file creator in the renamer copied this text into it
#!/static/ash
sleep 7
./mugen -r mkp&
sleep 1
./joy2key1 103 106 108 105 28 1 30 31 32 33 34 35 29 59 119 62 36 61 2 4&
./joy2key2 8 9 10 11 96 1 44 45 46 47 48 49 97 60 62 119 50 61 3 5&
# Here's the default order for buttons with joy2key
# ./joy2key (Dpad up) (Dpad right) (Dpad down) (Dpad left) (Start) (Back) (A) (X) (
(Y) (Black) (White) (L3) (R3) (Right analog up) (Right analog right) (Right analog down) (Right analog left) (L trigger) (R trigger)saved it to a menulaunch file
menulaunch9 since I used that one ftped that menulaunch file over to my existeng xmugen screenpack booters menu folder and replaced the old one with the new menulaunch9 file
on my xbox and also put the 4 menu files into my mkp folder in the data folder
menu9.gz
menulaunch9
mugenpak9.cfg
mugenpak9.xbe
remember to use the menulaunch files you used to setup the screenpack
I have done this for the EVE Battle and DC vs Marvel and mujen fighting jam Screenpacks with this method and I CONFIRM this method to work so if you are able to boot a screenpack via r1sky's or the bootloader if you configure tha main mugen.cfg file in the data folder to only boot that screenpack this will work
I hope this method will work for you also
ok if someone miss understands the line ./mugen -r mkp&
the mkp is for the mortal kombat project screenpack
if you wanted to use eve battle screenpack to boot up you would use ./mugen -r eve&
Post by: problem_child on March 19, 2009, 01:42:00 PM
Right now my xbox has just died, so anyone who wants to host this setup go ahead. You can also edit it any way you like. Anyone that can help me with my xbox shoot me a PM.
Once I get my xbox back working I will release some more xmugen games. Right now I am working on MKP 4.1 Remix for xmugen users. Adding new moves, characters, and maybe gameplay to 4.1.
Quote
I am redoing MK 4.1 for Xbox. The game is include MKP 4.1 characters and few others. Right now I am in the process of adding moves to existing characters and may add new ones. Right now I wanted to give everyone air combos and may add the dodge rolls like in MKBS. I am also including almost all of Liquid Jake's extras into the game like the Sokram Fatality (Sokram falls from sky and uppercuts head off opponent), Blaze Mode (after Finish Him you can come back to life on fire), Summon Blaze (if both fighters are on Blaze Mode you can summon Blaze - both fighters then burn to death but who summoned Blaze Wins), Arcade Hara Kiri, and Heal (get energy back after uppercut and Toasty man comes out). No Fujin Friendship though. That was incase you didn't know what the extras were I am sure most already know. I also want to add Super Combos, I am still learning but need help if someone can it can speed up the process. If I don't like my results (currently trying to add supers) then I will leave this out.
This sprite is based off the MKP 5.0 trailer. I liked the way it turned out.
Fujin
(IMG:http://www.freeimagehosting.net/uploads/211716604c.gif) (IMG:http://www.freeimagehosting.net/uploads/07f4ff404e.png)
This was the first sprite to see what it looked like, I will now do a complete sprite sheet for him. Tell me which looks better. There are other things I am working on but want to complete this first.
This is the New Tremor and if things work out as I like this will be a cool character.
(IMG:http://www.freeimagehosting.net/uploads/2290b5a837.png)
Also I am changing the saw move on Cyrax to this because I like it better.
(IMG:http://www.freeimagehosting.net/uploads/f6c9f4955f.png)
MKP 4.1 Remix
(IMG:http://www.freeimagehosting.net/uploads/7a74d944c5.jpg)
VS Screen
(IMG:http://www.freeimagehosting.net/uploads/6dc9c05fd4.jpg)
Here pics of select screen
Before Select Screen
(IMG:http://www.freeimagehosting.net/uploads/a38f43b6d8.jpg)
After (I like this better)
Added 1 extra row for more slots
(IMG:http://www.freeimagehosting.net/uploads/9b5035d692.jpg)
(IMG:http://www.freeimagehosting.net/uploads/b47ec60a29.jpg)
(IMG:http://www.freeimagehosting.net/uploads/97ef2340d2.jpg)
Sokram Lives
(IMG:http://www.freeimagehosting.net/uploads/45dacc9a19.jpg)
Blaze Mode
(IMG:http://www.freeimagehosting.net/uploads/31c4f6da78.jpg)
Here are some vids of characters just with extra moves I am adding.
Hydro Test (don't worry I will fix the stance)
http://www.youtube.com/watch?v=9QwzD54fTLg
Cyrax new moves
http://www.youtube.com/watch?v=eS28esQhjLU...re=channel_page
Reptile Edit
http://www.youtube.com/watch?v=E-YzXchdNdY...re=channel_page
Hydro (first test and Blaze Mode)
http://www.youtube.com/watch?v=y8k2hPkiqOM...re=channel_page
First test with Cyrax and Subzero edit
http://www.youtube.com/watch?v=iayZZLFDgXk...re=channel_page
Flame Test
http://www.youtube.com/watch?v=45W7iQHxeas...re=channel_page
Flame vs Scorpion
http://www.youtube.com/watch?v=Q-IH08sNtTQ...re=channel_page
Here some characters by other creators I find cool as well that I might edit and include.
Scorpion vs Sektor
http://www.youtube.com/watch?v=M8wLLb48CHk...re=channel_page
Scorpion vs Subzero
http://www.youtube.com/watch?v=hsUo986PSLQ...re=channel_page
I am also going to release the xmugen version of Marvel vs DC with this screenpack
http://www.youtube.com/watch?v=8J7hqQcf7Rg...re=channel_page
And a Mortal Kombat vs Street Fighter game.
Post by: Tweakster on March 19, 2009, 03:25:00 PM
are you able to boot it up at all or do you hear a clicking sound if so hd died
best bet go to a pawn shop and get a used one here I could get one for $40 and then softmod it and put a 1tb hd in it hehe (IMG:style_emoticons/default/biggrin.gif)
I hope you get it working
MKP 4.1 Remix looks freakin sweet problem_child cant wait!
I am excited now since I got the screenpack booter to work properly and load so far 5 diff screenpacks
Post by: problem_child on March 19, 2009, 03:39:00 PM
Post by: Tweakster on March 19, 2009, 05:12:00 PM
QUOTE(problem_child @ Mar 19 2009, 05:23 PM)
Right now it goes off and on, then stays on but doesn't boot anything. I have another xbox if I sent you both could you fix it? I saw that you are trying to get DC vM to work on your xbox check the 2nd to last link on my post and see if you like that DC vM. I am going to put that on the xbox but with different characters.
WOW cant wait for that version of marvel vs dc looks freakin awsome!!!!!!!
I tried dc vs marvel but not enough slots I have over 30 dc and marvel characters I want to add to it and cant figure out how to add more freakin slots to it
I cant wait for ur version I love the new character select screen and actually everything in it!!
I am a huge comics fan
sent you pm about your xbox
Post by: problem_child on March 19, 2009, 06:20:00 PM
Off Topic (kind of)
Since my xbox broke I having been looking in to the 360 and if it was possible to run mugen on it. One of the forums I go to have a thread about a new open source mugen build called xnamugen.
XNA Mugen Forum:
http://mugenguild.com/forumx/index.php?board=353.0
It is basically mugen built in xna, since this is a mugen forum I thought I would post about this. I don't know too much about xna but games built with it can be ran on the 360 with a premium membership right?
I know that microsoft would never approve such a product to be sold on LIVE Marketplace but this wouldn't stop us from running it on our 360's ourselves would it? Since this is an open source project we could compile it to run on the 360 is this correct?
Right now XNA Mugen is in beta stages but looks promising the only drag about XNA is it is free for PC and Zune but for 360 you have to pay. But I will gladly pay to play mugen on my xbox 360. Check out the forum and see what you think.
This post has been edited by problem_child: Mar 20 2009, 01:25 AM
Post by: Tweakster on March 19, 2009, 08:03:00 PM
QUOTE(problem_child @ Mar 19 2009, 08:04 PM)
@Tweakster I left some things in your PM.
Off Topic (kind of)
Since my xbox broke I having been looking in to the 360 and if it was possible to run mugen on it. One of the forums I go to have a thread about a new open source mugen build called xnamugen.
XNA Mugen Forum:
http://mugenguild.co...php?board=353.0
It is basically mugen built in xna, since this is a mugen forum I thought I would post about this. I don't know too much about xna but games built with it can be ran on the 360 with a premium membership right?
I know that microsoft would never approve such a product to be sold on LIVE Marketplace but this wouldn't stop us from running it on our 360's ourselves would it? Since this is an open source project we could compile it to run on the 360 is this correct?
Right now XNA Mugen is in beta stages but looks promising the only drag about XNA is it is free for PC and Zune but for 360 you have to pay. But I will gladly pay to play mugen on my xbox 360. Check out the forum and see what you think.
sounds promising but personally I would not pay to play mugen i am happy with the pc version and the xbox version right now.
dont get me wrong...I would love to play mugen on my 360 in a heartbeat
I just wish someone could update xmugen with the latest mugen so i wouldn't have to keep pressing the blasted F1 crap
just got mortal kombat vs streetfighter to load via menulaunch in the screenpack booter with the method i posted earlier
thanks problem_child for the link
Post by: problem_child on March 19, 2009, 07:16:00 PM
As far as xmugen goes right now even though I haven't tested, but it I hear alot of good things about kakuto's setup with the 2GB and 3GB swap file. Not to mention it also uses a newer build of linmugen (currently all other setups use the old linmugen) this means all characters that use the movereversed trigger should work without changing them to movehit.
I think Kakuto's setup is best for those looking for a more stable build, and with the big swap files things will load quicker and you should be able to use bigger file size characters with less lag.
This post has been edited by problem_child: Mar 20 2009, 02:19 AM
Post by: Tweakster on March 20, 2009, 12:13:00 AM
if anyone is still using the slim xmugen and at the bottom left corner it says beta 2001 go here download the xmugen setup
which is the beta 2002.14.04 version
when you have downloaded it unrar it and look in the main xmugen folder for a file named mugen its a 4mb file
transfer that file over to your slim xmugen folder and either name the old mugen file to mugen.bak so you can go back to that version of mugen or just overwrite the old mugen file with the new one
when done boot up a screenpack and see if it says beta 2002.14.04 you still have to press F1 which still sucks but hey at least its better than the 2001 version (IMG:style_emoticons/default/biggrin.gif)
this version I linked to is basically r1sky's F/games version but with the beta 2002.14.04 Linux mugen
warning...it will make the AI more defensefull than aggressive
This post has been edited by Tweakster: Mar 20 2009, 07:21 AM (http://www.spriters-academy.com.ar/index.php?topic=21.0)
Post by: yeshuachrist on March 20, 2009, 02:23:00 AM
USING THIS POST.
if you take the 3 gig swapfile (from where kakuto posted) and name it bigcheese, put it in your swapfile folder, when you first run the 5mb mugen it will turn that one into 1 blank swapfile, and create its own "SIGNED" swapfile. IF LEFT LIKE THIS mugen will refuse to boot a match in mugen. the 5mb mugen can identify the 2nd gig but can't use it due to it being improper. so it can use more then 1gig but can't create more then 1gig due to signature or engine limitation.
(cough authentic check)
instead let it create a 1gig "r1skyswap" file, the first time you run the 5mb mugen. now add the file i have here called "samuel" (it should be about 1gig when extracted), now take the "r1skyswap", renamed to "psalm" and the "samuel" file, and put them in the same folder and run the launch.bat file. the new file will be called "r1skyswap", and put it back in your swapfile folder, enjoy the 5mb mugen. if u want larger modify the recover.bat file, use a notepad program.
project angel scar: so the current theory is to induce errors in the op sys of the guidance system, so as it course recovers, it can out think a incoming threat. so anyway i was think this is kinda short because the last 9months have not been good with the workload, i know the physical limitation of g-loads, why continue to over program in site of those inherent restrictions. so anyway i replied usual, the failed results turn them into mugen characters the usual way, get cj's new doll, there making more progress with error inductions, who cares. g-load is the boss here not you LOL.anyway ENJOY, bon't beleve everything you read on the internet, (ah may take 2minute to 4 longer to load in extreme cases due to signature check pass timeout, force pass?, on larger swap)
also i belive the F1 SCREEN could be disable near this location if you search for "@KBToUInp" in hex, not that i tried anythint outthe links to the file below contains what u need also the 5mb mugen file you need with 1 small change (beta message cleanup, u can vertify if you want what was changed i didn't damage anything-).
http://www.filefacto...kuto_unixon_rar
Post by: Tweakster on March 20, 2009, 03:14:00 AM
QUOTE(yeshuachrist @ Mar 20 2009, 02:59 AM)
also i belive the F1 SCREEN could be disable near this location if you search for "@KBToUInp" in hex, not that i tried anythint outthe links to the file below contains what u need also the 5mb mugen file you need with 1 small change (beta message cleanup, u can vertify if you want what was changed i didn't damage anything-).
http://www.filefacto...kuto_unixon_rar
Thanks for the file yeshuachrist
the blasted F1 screen popup is really annoying I wish someone knew how to remove the blasted thing
I have yet to mess around with with hex editing or I would do it myself
Post by: rocky5 on March 20, 2009, 11:10:00 AM
if any ones wants the config file just ask will put it up.
Also i have noticed that when i play the game in 480p or 720p the screen is incorrect its off to the left is there any way to fix this as i cant play it in SD mods as it doesn't work with the component cable only RGB or composite.
This post has been edited by rocky5: Mar 20 2009, 06:24 PM
Post by: Tweakster on March 20, 2009, 01:53:00 PM
QUOTE(rocky5 @ Mar 20 2009, 12:54 PM)
Am looking forward to this new MK mugen also i have scraped the bloody launch files as i cant get them to work at all i always get that bloody error entering mode v2 or something like that so edited up unleashx and made batch scripts to change screenpacks also its a lot cleaner and easier.
if any ones wants the config file just ask will put it up.
Also i have noticed that when i play the game in 480p or 720p the screen is incorrect its off to the left is there any way to fix this as i cant play it in SD mods as it doesn't work with the component cable only RGB or composite.
hey could I get that config file? I would not mind checking it out
Post by: Tweakster on March 20, 2009, 06:41:00 PM
and xbmc is able to launch r1skys xmugen setup via a .cut file
so...I just tried it out using slim xmugen and xbmc .cut file
I have mortal Kombat project 4.1 set to launch from mugenpak9
so..
<shortcut>
<path>f:\Emulators\xmugen\menu\mugenpak.xbe</path>
<label>Mortal Kombat Project</label>
<thumb>E:\Images\Mortal Kombat Project.png</thumb>
<custom>
<game>F:\</game>
</custom>
</shortcut>
so to see if a second screenpack would boot via a .cut file I tried again this time with dc vs marvel screenpack set to mugenpak8.xbe
<shortcut>
<path>F:\Emulators\XMugen\menu\mugenpak8.xbe</path>
<label>DC vs. Marvel</label>
<thumb>E:\Images\DC vs Marvel.png</thumb>
<custom>
<game>F:\</game>
</custom>
</shortcut>
and SUPRISE they both boot up from xbmc!!!
I thought I would just post my findings on this if anyone is interested I got tired of having to boot unleashx and then selecting a screenpack from there since xbmc is my main dash
Post by: rocky5 on March 20, 2009, 07:28:00 PM
QUOTE
Tweakster
nice one i get what you mean as XBMC is my main dash to but i have scraped the launch files as i couldn't add screenpacks i kept getting that damn error so i resorted to unleashx as this can do it easy.
Iam going to make a new skin for this with 2 big preview windows for videos and images and if you want my profile for Windows Media Encoder to converting to wmv v8 so you can then convert to xmv then just ask.
Here is an image note this skin is temp.
(IMG:http://img25.imageshack.us/img25/1559/image0003.th.png)
Here is the config just save it as Config.xml
CODE
This post has been edited by rocky5: Mar 21 2009, 02:44 AM
Post by: Tweakster on March 20, 2009, 07:42:00 PM
will this config file work with R1skys setup since It runs faster and smoother?
have you tried making a menulaunch file in the xmugen renamer app
I used to get that same error when i just edited a menulaunch file in the menu folder of xmugen
so I create a new menulaunch file in xmugen renamer
This post has been edited by Tweakster: Mar 21 2009, 02:52 AM
Post by: rocky5 on March 20, 2009, 09:25:00 PM
QUOTE(Tweakster @ Mar 21 2009, 03:26 AM)
will this config file work with R1skys setup since It runs faster and smoother?
Yeah it works with this version as this is the one i use well i use the new version the 4.88mb version.
Yeah i tried that and it worked well for the version i am using the now (launch) but i already done the config so i will just stick with that as i can add in preview videos and make a nice skin
Post by: Tweakster on March 20, 2009, 08:29:00 PM
QUOTE(rocky5 @ Mar 20 2009, 10:01 PM)
Yeah it works with this version as this is the one i use well i use the new version the 4.88mb version.
Yeah i tried that and it worked well for the version i am using the now (launch) but i already done the config so i will just stick with that as i can add in preview videos and make a nice skin (IMG:style_emoticons/default/smile.gif)
same here i use the 4.88 mb one as well just tryed it with r1skys setup with the 4.88mb version and it works (IMG:style_emoticons/default/biggrin.gif)
Thanks for the config.xml
Hopefully someone will figure out how to do the same thing in the unleashx config.xml you posted here to make xmugen do the same thing in xbmc I allready spent a hr creating wide icons for my xmugen screenpacks and would love to be able boot them via diff mugen.cfg in r1sky's setup through xbmc that would be so freakin sweet (IMG:style_emoticons/default/biggrin.gif)
This post has been edited by Tweakster: Mar 21 2009, 03:34 AM
Post by: rocky5 on March 20, 2009, 11:04:00 PM
Post by: problem_child on March 22, 2009, 04:19:00 AM
To make sure you know what I am talking about this is a mugen clone built with xna for the PC, that should port to 360.
QUOTE
xnaMugen is an clone of the MUGEN Fighting Game Engine. The makers of this game, Elecbyte have disappeared from the internet their game hasn't been updated in years. So, as a challenge to myself, I attempted to emulate the engine. While I'm not done yet, it's good enough to play.
Please try out my engine and leave feedback on how well it works.
As the game is built using XNA, you will need to download the framework from Microsoft. A link to the framework is on the xnaMugen page and at the bottom of this post.
Please try out my engine and leave feedback on how well it works.
As the game is built using XNA, you will need to download the framework from Microsoft. A link to the framework is on the xnaMugen page and at the bottom of this post.
Here is where to get the newest xnamugen.
http://www.codeplex.com/xnamugen
How to compile xnamugen
QUOTE
How To Create a Development Environment For Compiling xnaMugen
Operating System Required:
Windows XP
Windows Vista
Windows 7 Beta
Install Visual Studio 2008 Express for C#: http://www.microsoft.com/express/download/
*Note* If you already have a better version of Visual Studio installed, you do not have to install Visual Studio 2008 Express.
Install Microsoft XNA Game Studio 3.0: http://www.microsoft.com/downloads/details...;displaylang=en
Update DirectX to 9.0c (November): http://download.microsoft.com/download/1/7.../dxwebsetup.exe
Download the latest source code for xnaMugen: http://www.codeplex.com/xnamugen/SourceCon...bleCommits.aspx
Extract the source into it's own directory. Example: C:\Code\xnaMugen\
Open the file 'xnaMugen.sln' in the code directory. It will open in Visual Studio 2008 Express. In Visual Studio, open the 'Build' menu and click on 'Configuration Manager'. Set the 'Active Solution Configuration' to either 'Debug', 'Release' or 'Release - Diagnostic'. Click close. Open the 'Build' menu and click on 'Build Solution'. This will build xnaMugen from source.
The program file 'xnaMugen.exe' will be in the '\xnaMugen\bin\' directory. Move this file into your MUGEN directory with 'xnaMugen.ini'. You should how be able to run xnaMugen.
Operating System Required:
Windows XP
Windows Vista
Windows 7 Beta
Install Visual Studio 2008 Express for C#: http://www.microsoft.com/express/download/
*Note* If you already have a better version of Visual Studio installed, you do not have to install Visual Studio 2008 Express.
Install Microsoft XNA Game Studio 3.0: http://www.microsoft.com/downloads/details...;displaylang=en
Update DirectX to 9.0c (November): http://download.microsoft.com/download/1/7.../dxwebsetup.exe
Download the latest source code for xnaMugen: http://www.codeplex.com/xnamugen/SourceCon...bleCommits.aspx
Extract the source into it's own directory. Example: C:\Code\xnaMugen\
Open the file 'xnaMugen.sln' in the code directory. It will open in Visual Studio 2008 Express. In Visual Studio, open the 'Build' menu and click on 'Configuration Manager'. Set the 'Active Solution Configuration' to either 'Debug', 'Release' or 'Release - Diagnostic'. Click close. Open the 'Build' menu and click on 'Build Solution'. This will build xnaMugen from source.
The program file 'xnaMugen.exe' will be in the '\xnaMugen\bin\' directory. Move this file into your MUGEN directory with 'xnaMugen.ini'. You should how be able to run xnaMugen.
Again since this project is open source and will constantly be updated it has the potential to be better then winmugen ever was. Stay tuned to this project it looks like this will be mugen of the future.
This post has been edited by problem_child: Mar 22 2009, 11:21 AM
Post by: Madnezz on March 23, 2009, 10:56:00 AM
Is there any real halp with xmugen installations? I myself have it installed on xbox, and everything loads up just fine, I select my charicter to fight and it freezes on that screen, I cant use the controler to reboot to unleashx. BTW it is on my E drive.. any help much apreciated... msg here or to madnezz_aod at yahoo dot com.
someone PLZ post a url for help
Post by: Tweakster on March 23, 2009, 02:36:00 PM
QUOTE(Madnezz @ Mar 23 2009, 11:32 AM)
Why are all the latest posts returning error pages?
Is there any real halp with xmugen installations? I myself have it installed on xbox, and everything loads up just fine, I select my charicter to fight and it freezes on that screen, I cant use the controler to reboot to unleashx. BTW it is on my E drive.. any help much apreciated... msg here or to madnezz_aod at yahoo dot com.
someone PLZ post a url for help
1. when loading that character does it go to a error screen or just freeze up?
2. did you run xmugen renamer on that certain character to make it all lower case?
3. have you tested that character in winmugen to see if it gives you a error?
4. is it a hi-res character if so if running on slim mugen that version I believe has problems with hi-res characters
5.have you tried more that one character on your xmugen setup if so does only this one character freeze up?
there is no way to reboot back to unleashx when in xmugen all it will give you is a error screen since Xmugen does not have a IGR (in game reset)
If any files are not in lower case in a character folder xmugen will spit out a error upon loading that character
make sure to run xmugen renamer on all your characters
Post by: Bochief on March 27, 2009, 06:14:00 AM
Post by: Reza1986 on April 04, 2009, 09:51:00 PM
QUOTE(Bochief @ Mar 27 2009, 05:58 AM)
I need help. I'm using xmugen 4.9 and It's stuck on thw Now Loading screen. What do I need to do?
Are you using the setup for the E drive or F drive? Do you have the XMugen Renamer?
Post by: nio107 on April 05, 2009, 03:19:00 AM
QUOTE
same here i use the 4.88 mb one as well just tryed it with r1skys setup with the 4.88mb version and it works
WHAT?!
a 4.88!?
aahh..sorry... for a second I believe it was 4.88 gigas (mine is 3)... so I was like...crap why I didn't notice!!
xD
Post by: Bochief on April 05, 2009, 09:39:00 AM
Post by: Reza1986 on April 09, 2009, 08:36:00 PM
QUOTE(Bochief @ Apr 5 2009, 09:23 AM)
I'm using F drive setup and yes I have the renamer
Hmm...lets see now
Did you setup your screenpack, characters and stages probably, meaning everything is leading to the right folders and its compatible?
Post by: matosman on April 12, 2009, 01:13:00 AM
I am french and since two months i got back my xbox.
And i made a very nice mugen but i absolutely not understand which way to add more than 1 gb swap.
Sometimes, it is very long time to load characters and anything else, in team battle is very long to wait.
So i have 2 questions :
1 - Which ways to add more than 1 gb ?
2 - Is it possible don't show information message (with F1) in beginning ?
Sorry for my poor english, and yes i search in this forum before ask question.
I didn't understand very well that's all.
Post by: morbus on May 14, 2009, 09:53:00 AM
Thanks!
Post by: nio107 on August 11, 2009, 01:31:00 AM
QUOTE(morbus @ May 14 2009, 04:53 PM)
Hi, I am unable to get past the 'F1' screen pressing analog sticks down do not work, i am using a madcatz wireless controller.. would this controller cause any problem like this?
Thanks!
there's a few controllers that are not recognised, but I think madacatz should work (not sure, I can't remember right now)...
about the Swap File, I'm curious too, cause I have a 3 giga swapfile, but people told me it doesn't work, that the default 1gig load instead of the 3gigas swap...
(?)
there's a way to use the 3 gigas swap
www.spriters-academy.com.ar/
(search Xmugen and you will find that swap file there)
Post by: chukydragon on August 14, 2009, 03:54:00 AM
QUOTE(FourTwentySmiles @ Mar 12 2008, 09:09 PM)
OK.......I now have a working copy of Xmugen on my xbox. What I am now wondering is how to add characters.
If I understand correctly...I need to edit the select.def file. Seeing as how my dev skillz are up to par with the likes of Napoleon Dynamite (and you know he gots skillz).......Im screwed.
Maybe not.......Once I understand what Im lookin at, Ill be ok.
I Hope.
ok pal is very easy to add character to the mugen jurmm (x-mugen of corse)
first you have to check the character with Fighter Factory if is complete then use xmugen renamer to change to xmugen(xmugen is CASE_sensitive so change it and PRESTO!!! character lyou like to une in xmugen
I got right know about 30GB of data of mugen...COOL no!
Post by: xmod4u on April 30, 2010, 09:22:00 PM
I had this mugen 4.9 for F drive running like a charm for 2 years now.
The xbox in question is inside a PC case from an old mod, and I decided to make an arcade cab with a different xbox and COPY over the same folder to the SAME place in the other xbox.
Both same xbox 1.3
Both same chip smartxx v2
Both in the same place F:/emulators/xmugen
I literally copied from xbox to xbox to make sure I had the same setup.
It STILL boots on the first one, but the second I get this error.
I tried everything and have been reading for 2 days on this 30 page thread. I just dont get it.
It cant be the setup, it works on one xbox.
any input would be greatly appreciated.
thanks
xmod
Post by: Pulsemasta on April 30, 2010, 09:36:00 PM
QUOTE(xmod4u @ May 1 2010, 04:22 AM)
First off, sorry to bring back an old thread that will prolly make some peeps go "ah no, not again!" lol
I had this mugen 4.9 for F drive running like a charm for 2 years now.
The xbox in question is inside a PC case from an old mod, and I decided to make an arcade cab with a different xbox and COPY over the same folder to the SAME place in the other xbox.
Both same xbox 1.3
Both same chip smartxx v2
Both in the same place F:/emulators/xmugen
I literally copied from xbox to xbox to make sure I had the same setup.
It STILL boots on the first one, but the second I get this error.
I tried everything and have been reading for 2 days on this 30 page thread. I just dont get it.
It cant be the setup, it works on one xbox.
any input would be greatly appreciated.
thanks
xmod
Did you make sure the Linux Config file is in the root of the drive and that it looks correct?
also, are you using a controller other than a official Xbox controller? That could cause an error too.
I got that error before from these issues.
Post by: Pulsemasta on April 30, 2010, 10:28:00 PM
QUOTE(xmod4u @ May 1 2010, 05:11 AM)
using official S controller.
What is the linux config file called?
mugen.cfg
mugenboot.cfg
I dont see and actual file called linuxconfig, the xbox that mugen works on does not have that either.
I read about having the bzimage and irdloop.gz in the root of E, tried and still same error.
What baffles me it that both xbox's have exactly the same setup and file configuration and paths, boots on one but not the other.
forgot to add, ONLY dif between both boxes is the HDD. one that works has a 320GB and the other has a 160GB. both partitioned with 137+ for F tho.
Man! i thought this would of been a simple transfer and play.
thanks again all
Yeah the Mugen.cfg or whichever would be the one... its a linux config but renamed so you can have linux and mugen with no issues. You have the Mugen cfg right in the root of F right?
If so, I'm not sure what your problem is then
I know Mugen can be picky with larger drives, but your saying the smaller drive is the one with issues?
I would get a fresh MUGEN, delete all saves and whatnot from the Mugen you are trying to load now, put the new one on and try again.
Post by: joeblow420 on March 10, 2011, 06:07:00 PM
Post by: joeblow420 on March 12, 2011, 03:23:00 AM
but i seen some interesting info there, such as this:
QUOTE
Originally Posted by nextelhalo View Post
Long Shark- You have to put Xmugen in F:. The kicker is that F: needs to be under 256GB or you have to format it with 32k clusters, Xmugen does not like that. SO....what you need to do is get a program called XBpartitioner and use it to format you drive. Just give F: 137gb or lower and the rest goes on G: which you'll have to format with 32k clusters. This program is very easy to use.
Long Shark- You have to put Xmugen in F:. The kicker is that F: needs to be under 256GB or you have to format it with 32k clusters, Xmugen does not like that. SO....what you need to do is get a program called XBpartitioner and use it to format you drive. Just give F: 137gb or lower and the rest goes on G: which you'll have to format with 32k clusters. This program is very easy to use.
so i replied with this..:
QUOTE
I got a 1.0 xbox, used to be softmodded, but i dont have a pc, and wanted to put in a 2tb hdd.. so i hard modded, and flashed the tsop with ind bios 5003.67.. before that it was softmodded with a 320 gig hdd, and had an older screen pack edition of xmugen using unleashx as the launching platform. it always worked fine, so i just been copying everything from my old xbox to my notebook, and then back to the new 2TB hdd.. when looking for some useful info about how to get the most out of the 2TB hdd with out any data corruption issues, i was told to do this:
1. launch xbpartitioner 1.0
2. Split the F & G drives 60/40 (uneven split)
3. format both F&G in 32k clusters temporarily
4. Reboot xbox
5. launch xbpartitioner 1.1
6. Split the F & G partitions 50/50
7. Now format in 64k clusters
which i did, all is fine with the hdd, but now my xmugen will not work.. i get some error about fatx raw_scan_root or something like that sector 0 is not available file system set to read only.. very odd.. anyway that is the only error i get from it..
i also have the win98 xdsl edition, which i added a command to either launch windows 98 or mugen, it always worked before, but as i said above now i cant seem to get it running at all. i made sure all files were copied over, and dumped everything back into the drives they worked on in the other hdd.. i always held up xmugen as the crown jewel piece for what is possible on the xbox, and so bummed out its not working on this new hdd.. i mean i could always just swap out the hdds when i want to play, but its not really what my goal was when i went into getting the 2Tb hdd.. know what i mean..? so any and all info is very much appreciated !
btw again i did as suggested in xbox scene forums under the tut for the custom hdds of this size.. so will the 64 clusters be a problem, or can i just fill up F drive to the brim say till there is only 100-200 gigs free on it, will that be enough.. i dont think i can just make F drive 127 gigs and the rest on G, heard there was some issue with fatx system reading any partition over 1000 gigs or something... thanks again, and if ur still interested in any info about the screen packs let me know, i got the MK vs SF and MK project, and many others. got them from a private site, and all configs to get them to run under the custom unleashx launcher either stand alone packs, or as eve or slim eve packs.. again this was all working fine with my krayzie ndure mech ass softmod, then i went to a hardmod, where everything still worked very very well..
1. launch xbpartitioner 1.0
2. Split the F & G drives 60/40 (uneven split)
3. format both F&G in 32k clusters temporarily
4. Reboot xbox
5. launch xbpartitioner 1.1
6. Split the F & G partitions 50/50
7. Now format in 64k clusters
which i did, all is fine with the hdd, but now my xmugen will not work.. i get some error about fatx raw_scan_root or something like that sector 0 is not available file system set to read only.. very odd.. anyway that is the only error i get from it..
i also have the win98 xdsl edition, which i added a command to either launch windows 98 or mugen, it always worked before, but as i said above now i cant seem to get it running at all. i made sure all files were copied over, and dumped everything back into the drives they worked on in the other hdd.. i always held up xmugen as the crown jewel piece for what is possible on the xbox, and so bummed out its not working on this new hdd.. i mean i could always just swap out the hdds when i want to play, but its not really what my goal was when i went into getting the 2Tb hdd.. know what i mean..? so any and all info is very much appreciated !
btw again i did as suggested in xbox scene forums under the tut for the custom hdds of this size.. so will the 64 clusters be a problem, or can i just fill up F drive to the brim say till there is only 100-200 gigs free on it, will that be enough.. i dont think i can just make F drive 127 gigs and the rest on G, heard there was some issue with fatx system reading any partition over 1000 gigs or something... thanks again, and if ur still interested in any info about the screen packs let me know, i got the MK vs SF and MK project, and many others. got them from a private site, and all configs to get them to run under the custom unleashx launcher either stand alone packs, or as eve or slim eve packs.. again this was all working fine with my krayzie ndure mech ass softmod, then i went to a hardmod, where everything still worked very very well..
so can anyone shine some light on this for me pleaseee???
Post by: Spadra on March 15, 2011, 02:58:00 PM
I've recently gotten into XMUGEN about 3 weeks ago and have been busily researching the different ones and have been reading info from Guybird to Idiotfan and so on. I've noticed that the XMUGEN projects don't seem to be fail safe and needs to be evaluated on an individual basis. I'm hoping all you good folks here can give me a hand and I can count myself among the success stories of XMUGEN.
Here is my situation:
I have attempted to use Xmugen Battle Coliseum. Which I obtained at: here
I also tried Xtreme Xmugen 2.0 Final by xRaVeNx(obtained from Demonoid)
Both of these version are described as "drag and drop", more precisely drag and drop the xmugen folder into the directory F:Games/. Upon doing that for both (I've also spent hours adjusting and trying different caps lock combinations like 'F:/Games/XMUGEN' and so on and so forth after reading different blog posts) I received the same issue. Upon loading the black screen freezes and what is suppose to be the white text with the picture of the guy above it is a blur of a scrambled white banner at the top.
I then went and tried the SlimXMugen project which makes use of an Emulator folder as opposed to the Games folder. Slightly more success. I open it through XBMC and it loads UnleashX and gives me the option to load a screen pack. This mini victory is short lived, the only option is basic and it crashes upon clicking it. I originally had a copy of Broken Mugen that did the same thing. Difference being the Broken would load a whole menu with a background, the Slim did not.
About my system you ask? Its the always beloved 1.6 xbox, with UnleashX, the XBMC, and EvolutionX. I have upgraded my hard drive with a 500 GB White Disc and have used XBpartitioner and have the F: at 120.55GB (in the partitioner F is the partition listed as '6' in the extended partitions, right?) and the G: at 337.76GB.
I'm assuming my only hope is with Broken and the Slim but I know I need guidance to get either up and running. Really keeping my fingers crossed someone out there sees this and has some pointers.
- Spad
Post by: BuraddoX on March 15, 2011, 04:27:00 PM
Please Read The Rules Before Posting
Updated Rules
Post by: Spadra on March 15, 2011, 04:44:00 PM
Post by: BuraddoX on March 15, 2011, 08:05:00 PM
QUOTE(Spadra @ Mar 15 2011, 11:44 PM)
Thank you. I actually realized that after I posted. Unfortunately I don't seem to have the option to edit my posts on this site? That's sort of absurd. Either way if an admin will kindly take it down or if I can do something about it I will. My goal is obtain help not cause an issue.
Don't worry im not trying to get you in trouble im just stating the rules.
i hope someone can help you with this as i don't use XMugen.