xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: popothemailman on August 09, 2004, 01:10:00 PM

Title: Quick Desolder Question
Post by: popothemailman on August 09, 2004, 01:10:00 PM

on the v1.0 xbox should i just remove the solder on the lpc that the pin holes are going into or should i remove the solder from all the holes?

Title: Quick Desolder Question
Post by: ncaissie on August 09, 2004, 01:53:00 PM

if you have the solderless ad then don't bother.
If you do a pinheader (recomended) then yes you should.

Title: Quick Desolder Question
Post by: appleguru on August 09, 2004, 02:49:00 PM

It's easier to remove solder from just the holes that the pin header is going into, but either will work fine ;)

Title: Quick Desolder Question
Post by: Xboxmodder3690 on August 09, 2004, 03:07:00 PM

I'd remove the solder from all of the pinheader positions and then one more hole for the bottom d0. It is larger adn much easier to solder in