xboxscene.org forums

OG Xbox Forums => Software Forums => Development => Topic started by: Loranga on January 22, 2003, 01:27:00 AM

Title: Is It Possible With A Dns Client?
Post by: Loranga on January 22, 2003, 01:27:00 AM

Aloha!

I get 5 dynamic ip from my ips so I use a switch between the pc and xbox. But since the ip is dynamic Ill use Infodash to see the curent ip on the box and then I have to type thet every time I want to ftp to the box. I was woundering if its possible to make some sort of dnsclient for the box, like the ones there is on the pc? (http://clients.dyndn...?service=dyndns)

Title: Is It Possible With A Dns Client?
Post by: Loranga on March 12, 2003, 11:12:00 PM

hmm no reply = a bad idea I guess.

Title: Is It Possible With A Dns Client?
Post by: EvilWays on March 13, 2003, 07:27:00 AM

Try a router/switch combo. I personally use a Linksys BEFSR81, but any should work. Most should have DHCP and NAT built-in, so you use internal IP addresses. For example, I have a desktop, laptop, and XBox hooked up to the router, with DHCP active and telling it to handing out internal IP addresses starting with 192.168.1.10. So the computer (or whatever is the first device powered up and requests an internal IP address) is given the starting IP. The second system gets 192.168.1.11, and so on. If I shut off the desktop, that internal IP is available for use, so if I fired up something else on the network, it'd be given the first (lowest) internal IP address. Really convenient...

All the NAT does is access a table used by DHCP and point that to the IP provided by the ISP, so that your devices can reach the outside world.