Post by: dalvenjia on July 29, 2008, 03:18:00 PM
or
Go to option "3" of xboxhdm. Type unlockhd -p XBOXSCENE
Good Luck
Post by: ldotsfan on July 30, 2008, 08:12:00 AM
QUOTE(JCV @ Jul 30 2008, 06:02 AM) 
I typed the second. Option 3 then unlockhd -p XBOXSCENE. It says invalid password. Carachters mast be less than 32 bytes (64 Characters) And it doesnt unlock. I am gonna break this thing. The error up to the next error.
unlockhd -p only works with hexadecimal passwords. Try xboxhdm boot option 4 followed by ATAPWD as in the earlier post.
Post by: obcd on August 04, 2008, 01:49:00 PM
You could use the windows liveinfo beta 3 program to check your eeprom.bin file. It should even give you the correct user locking password if you select the correct disk. You can also check the serial number in the eeprom.bin file and compare it with your xbox eeprom number.
It is not 100% clear to me where xboxhdm searches for the eeprom.bin file.
I usually copy it to a floppy disk. That way, I can use my xboxhdm cd for different xboxes.
You can use the dos tools and type in the password directly. Just make sure you don't make a typo, as you
can end up with a totally unlockable disk. (If the master password is not set or unknown)
regards.
Post by: ldotsfan on August 05, 2008, 08:40:00 AM
QUOTE(obcd @ Aug 5 2008, 04:25 AM)
It is not 100% clear to me where xboxhdm searches for the eeprom.bin file.
eeprom folder of the linux folder when you build the iso. filename is case sensitive and should be in small caps.
Post by: ldotsfan on August 12, 2008, 09:37:00 AM