Post by: broadddd on March 23, 2008, 09:47:00 PM
Post by: xman954 on March 23, 2008, 09:52:00 PM
QUOTE
PS. Do I need to backup my F drive files before changing to a soft-mod?
Nojust select .06 (if that is what your chip bios is set to)
Post by: broadddd on March 29, 2008, 12:11:00 AM
Then I copied all the files over to my Xbox C drive, adding ernie.xtf to the xodash folder first, and xbox.xtf second, as instructed in the readme.
It still boots under the modchip fine, as I left my evoxdash.xbe in place. However, with the modchip off, it just boots to a black screen.
I'm guessing my problem is that I only had 300mb free on my C drive apart from the standard files, so couldn't fit the shadowc folder in there... so I put that on the E drive
I'd appreciate any tips on where I'm going wrong
Cheers,
Bruce
Post by: obcd on March 29, 2008, 03:54:00 AM
did you ftp a dashboard to the proper location?
I think E:\dash\default.xbe is what the softmod is looking for.
(upon a few other locations and dash names)
If you move the shadowc to the E partition, you need to change the nkpatcher as well. You could disable the shadowc by adding a shadowC_off.bin file to your e:\NKP11 folder or to the root of your e partition.
Are you able to boot into the softmod with the power button? The eject button normally boots into the M$dash on the shadowc drive. Since yours doesn't work....
regards.
Post by: broadddd on March 29, 2008, 05:07:00 AM
It boots with an orange LED at high fan speed, but it boots
Post by: obcd on March 31, 2008, 02:00:00 AM
led color is a matter of personal favour.
It was changed to Orange to give a clear indication that the softmod is running.
So, the normal meanings of the colors are no longer valid.
I think you can adjust the fan speed with a file called FAN.BIN in the e:\nkp11 folder.
The topic came up on this forum already.
regards.