xboxscene.org forums
OG Xbox Forums => No-Modchip Hacks (exploits) => XBE Exploits => Topic started by: Red_foxxx on February 05, 2007, 09:22:00 AM
-
Can anyone help me to hotswap a xbox with an already chipped xbox.
The only guide i found here was this:
Small xbox to xbox hotswap guide:
hardmodded xbox is named xbox A
softmodded/unmodded xbox is named xbox B
precaution: due to floating grounds it may be safer to connect both xbox chassis with a wire.
1: disconnect DVD IDE cable and HDD IDE cable from xbox B (while powered off)
2: reattach HDD IDE cable from xbox B but only halfway (but make sure it's connected)
3: power on xbox B and wait till it hits the error screen
4: pull out HDD IDE cable in one straight move and leave it powered on
5: put in a bootdisc in xbox A (make sure ftp settings are correct in this bootdisc)
6: power off xbox A and remove HDD IDE cable
7: power on xbox A and let it fully boot the bootdisc
8: put HDD from xbox B to xbox A free IDE cable
9: start ftp client connect and hit refresh
But can any one tell me witch programs i need to do this, describe the hole thing better(i'm a reel noob in this area)