Post by: domesticman on February 09, 2006, 10:19:00 AM
I remember reading about people having this same problem when I modded mine but didn't pay attention because I just have a small HDD. Now I can't find those posts.
We didn't see an option w/ndure to use .6 or .67? that I remember seeing something about to fix this.
We have access to ftp, mem cards, unleashx and evox (I read someone say they fixed the problem with this dash but didn't explain how...)
Thanks!
Post by: krayzie on February 09, 2006, 10:24:00 AM
Post by: domesticman on February 09, 2006, 10:38:00 AM
we used ndure 1.2 after it the hard drive was prepared with xboxhdm. It didn't partition a g....
do i need a g or can we put it all on f?
Thanks!
Post by: krayzie on February 09, 2006, 10:40:00 AM
Post by: DaddyJ on February 09, 2006, 10:41:00 AM
any drives larger than 250Gig should use a .67, if you are using a .67 , just format G from your dash, and the rest of the space should be available.
Post by: domesticman on February 09, 2006, 10:51:00 AM
so in unleahx i enablabled g and it says 0.00
Post by: krayzie on February 09, 2006, 11:01:00 AM
Post by: domesticman on February 09, 2006, 11:09:00 AM
Thanks for the help.
Post by: mightymooseboy on February 10, 2006, 08:36:00 AM
As a fella with a similar problem, actually the same I believe. Could I please get a little more detail on how to use your format tool, and should I use the npatcher .6 or .67 on top of the mod.
Your response is much appreciated.
Post by: krayzie on February 10, 2006, 08:38:00 AM
Post by: DaddyJ on February 10, 2006, 08:40:00 AM
QUOTE(mightymooseboy @ Feb 10 2006, 10:43 AM) 
As a fella with a similar problem, actually the same I believe. Could I please get a little more detail on how to use your format tool, and should I use the npatcher .6 or .67 on top of the mod.
Your response is much appreciated.
.06 = F takes rest of HD after inital 8gigs
.67 = F takes to 137gig and G will takes rest.
you can use .06 on HD upto 250, because F will only be 242,
Partitions over 247 start corrupting, so any drives over 250 should use a .67 setup.
you can alos use a .67 on any drive, but G will not be available unless the drive exceeds 145gig
Post by: mightymooseboy on February 10, 2006, 09:18:00 AM
Post by: mightymooseboy on February 10, 2006, 02:29:00 PM
Post by: krayzie on February 10, 2006, 09:10:00 PM
Post by: mightymooseboy on February 11, 2006, 02:38:00 PM
Post by: krayzie on April 04, 2006, 01:37:00 PM
QUOTE(ortegajl @ Apr 4 2006, 08:37 PM)
I used xbpartitioner and in 5 minutes I got one big F-partition.
xbox 1.6b
kernel 5838 with dash 5960
hd 300 gb
softmod with xboxhd 1.9 and uxe with nkpatcher
although I don't completely understand what was the point of resurrecting a thread that died 2 months ago but I am pleased to see a member that did his fair share of searching before posting instead of the usual asking for obvious questions and whining when the help is not some spoonfed fest
Post by: krayzie on April 04, 2006, 10:52:00 PM
QUOTE(moviecut @ Apr 4 2006, 09:54 PM)
i whould like to see the .06 / .67 - selection in the installer itself again, like it was in 1.0! i mean, it`s no big deal to change it with the extras, but it whould be easier to have it in the installer...just my opinion. maybe you should start a poll
To tell you the truth I got a bit sick of all the people asking about what option they needed to take. I know it's in the readme and in the textboxes but many people don't seem to read such things.
Post by: krayzie on April 14, 2006, 07:22:00 AM
Post by: krayzie on April 30, 2006, 12:55:00 PM